Powertex Jewellery Hochanda Follow Up
Hope you have got your Powertex out and been creating. If anyone was inspired by the jewellery designs on our last shows on Hochanda, then this follow up is for you.
I have completed the pendant I demo’ed and thought I would show you the finishing stages.
First I checked over the back and sides of the bezel. Even 10 days after the show I was able to clean this up. I gently rubbed with a baby wipe until the dried Powertex was soft then gently scraped with an old bank card then wiped clean.
I checked the piece all over to see if there were any sharp edges, this is essential so that it is comfortable to wear. I gently rubbed sharp areas with an emery board.
Next I added a layer of Powertex red ochre pigment blended with some Powertex Easy Varnish colouring most of the peiece.