I have had a wire box frame in my stash for ages. Originally it had a woven straw covering that fell apart so I removed it with the intention of recovering it. It ended up as another ‘UFO’ (unfinished object) for years. I have finally dug it out and created this Powertex treated fabric box embellished with hand made fabric flowers. Now it’s a fabulous trinket box for storing some of my crafty treasures.
The bare wire frame is a strong construction – similar to the type of wire used to make coat hangers. It measures approx. 8 inches square across the top and 6 inches deep.
I used some recycled cotton bed sheets and treated them with Black Powertexto cover the box and lid. I lined the outer and inner panels to completely cover the wire frame. I gathered some cotton trims for the next stage; some crochet lace and a piece of gathered Broderie Anglaise.
I treated the crochet lace with Powertex and applied around the box base.
The gathered lace was applied around the lid. I also dug out some greyboard lazer cut foliage shapes to embellish the top. These were coated and stuck down with Powertex. When dry I started dry brushing over the surface using Easy Varnish and Silver Colotricx. Extra colour was applied to the foliage to make it stand out from the dry brushed background.
Here you can see the dry brushed lid next to the unpainted base. The dry brushing has emphasised the texture and added metallic highlights.
Next I made some fabric roses from 25mm and 15mm strips cut from recycled bedding. These were created using Ribbon Ruching Flower Combs from Gina B-Silkworks. Basically strips are marked out using the Flower Comb templates, a running stitch is sewn along the marked lines and the stitching is pulled up to gather and shape into a rose. I prepared my strips and treated with Powertex before pulling up the stitching. The Powertex holds and glues the gathering in place. I left the flowers to dry before adding to the box top.
I used one of my dies to cut a frame for the centre (Sizzix), applied to the top and finished in the same way as the greyboard foliage.
The flowers were dry brushed with Easy Varnish and Interference Lilac Pigment. Loving these new Pearl Pigment colours! Powertex was then used to glue down the roses to the centre. I added some ready made flower stamens around the group (purple), and some small ready made satin ribbon roses to the corners (Powertex treated and coloured).
Next I mixed some 3D Sand and Ballsinto Black Powertex and drizzled the mix around the flowers. A few untreated balls were also dropped into the wet Powertex. The untreated balls kept their original colour on the surface giving contrast with the black base. Once dry I coloured by brushing over the surface using Easy Varnish and Mojito Lime Pigment.
I also dry brushed a little of the Lilac pigment sparingly over the lace trims and used to colour some hand made air dry clay embellishments (created using a silicone mould from my stash) added to the box corners.
I used one of my large rubber stamps (lace design from Heartfelt Creations) to stamp some extra textural interest around the sides using Viola Metallic Acrylic Ink. Note: the fabric surface is already quite textured and not very flat so the stamping does not give a clear impression of the design but just adds a little more depth and interest to the surface.
I hope that you like my new treasure box.
Hugs, Anne xxx.