Stone Art Clay Birds of Powertex Paradise by Shell North
In December my first Design team blog goodie box arrived! I was so excited!!! I was given the theme of a pair of birds and these are some of the items I received to create something with stone art clay to hopefully inspire others. (eggs, molds and dies are my own)
I did some research for birds in the style of these new MDF bases. I’m usually quite inspired by nature but nothing I found tickled my imagination. So decided to create something whimsical and a little different. Something from my imagination that may represent a bird of paradise. Because sometimes we need thoughts of warmer places of tropical paradise in these colder month in the UK….
Powertex uk’s favourite product of the month is Stone Art, I decided I was going to use stone art as a clay to cover this piece. I also pulled out my bottle of Blue Powertex liquid art medium. Although I love this colour, I just don’t use it enough! Mixing equal parts of Blue Powertex to stone art powder until I couldn’t stir it anymore. I kneaded it like dough until the stone art granules could not be seen. This was wrapped in cling film and left for a few hours while I prepped everything else.
First step was to create the bird shape was cut two polystyrene eggs in half long ways and attach them to the breast areas of the MDF bases with masking tape. Molding the 3D shape of the birds with foil and covering in masking tape. Keeping the holes in the MDF bases open for the wire wings by piercing through the eggs with wooden skewers. Then threading some wire through the bottom holes, I created a wing shape. Inserting the ends of the wires back in through the top holes on both birds, covering in foil and masking tape again. I built up the rest of the birds bodies as before with foil and masking tape.
Now the birds were fully covered in tape I pushed them onto the 2 pin metal base and molded legs for the birds with foil and tape as before to secure them.
The clay I had made earlier was now ready to use, so I warmed it slightly by kneading. I took clumps and rolled it out into sheets about 5mm thick. Wet the underneath with a little water and smoothed onto the birds piece by piece. To blend the areas as one, I again used a little water my finger tips and a small pallet knife. I also made some feather molds from the clay and added to the tail area of the birds.
For the wings I used one of my favorite texture products…. paper decor, available in a variety of colours. Today I used pink because the blue Powertex is quite dark the colour of the paper decor won’t show through. I cut feather shapes out of it and worked blue Powertex liquid hardener into each piece before smoothing on both sides of the wings.
Next I took Bronze (brown) stone art clay. Made with stone art and bronze brown Powertex art medium from a recent workshop. Rolled a long thin sausage shape and molded the beak shapes smoothing them into place. I covered the legs using stone art clay with my finger tips, a little water and small pallet knife.
I created a small repetitive feather texture all over the birds body on the still wet clay. By pressing the silicone texture pad against areas I needed texture. I wanted to create webbed feet, using left over wire from the wings I shaped bird feet. And covered in masking tape before paining them black with black Powertex universal medium.
I decided to add wire crests to the birds to give extra interest. By pushing thin wire through the clay and curling them at the ends. I chose some green glass eyes and pushed them into the clay. I decided to be a little quirky with the colour of the legs, as I’m creating whimsical birds. So I painted the legs stripy using licorice twist and clotted cream acrylics.
I left them to dry for a few hours so the clay would harden a little. So it was now time to bring them to life, by dry brushing with colours. For this I used Powertex powercolor and colortrix powder pigments mixed with easy coat varnish. I used orange and then faded yellow ochre in onto the beaks. I used ultramarine blue, then turquoise mixed with a little white. This makes the turquoise pop on the body and wings. Finishing by lightly dusting rich gold over the body and terra-green on the wings.
Well the finished piece can be seen below…..Thanks for reading my first blog as part of the Powertex UK Design team. I hope you all enjoyed what I created this time. Do join me again next month when I’m back with another article.
Don’t forget all the items used are hyperlinked. Click the highlighted text and it’ll take you straight to items you require, to save you time searching. Please don’t hesitate to comment or ask questions below.
In the mean time why not look through all the new and old blogs. Provided for you by the Powertex UK Design team and guests. You can also find me at The Crafty Little Corner. Send me a message if you would like to do this workshop with me. Or find me on my Facebook page sharing new ideas, hints, tips and a whole lot of Powertex inspiration.
Please spread the love and share this and other blogs.
Peace, love and Paradise 😉