Powertex Art Doll Time

Powertex Art Doll time on the blog again. These kits are a wonderful project to do if you’re looking to spread your creative wings. The template gives you a starting point with lots of room to try new techniques and ideas. I used a few techniques on my art doll to represent “time flies” but you could just choose the parts you like. That’s the beauty of these kits. Having no rules can be scary like a blank canvas but just try a technique or two that you like and make it yours. Here she is, my Powertex art doll using the small template.

Powertex Art Doll project by Kore Sage
Powertex Art Doll by Kore Sage

Supplies

Powertex small art doll mdf kit
Powertex Small art doll kit

These were the supplies used on this art doll.

Small art doll mdf kit

Powertex Universal Medium in Transparent, Ivory and Black

Rice Paper

Easy Coat Mat

Rusty Powder

Easy Structure

3d Sand and Small balls

Acrylic paints in Red Velvet and Orange Marmalade

Mdf drop outs

Powercotton

Assorted keys from Treasure boxes

Paper fasteners

Getting started

First pop out your Mdf shapes and try some layouts that you like. When you’re settled on a placement, start to prepare your pieces. I tore up a piece of rice paper to roughly fit the body. The theme is “time flies” so I chose a paper with pocket watches on. This fits the rectangular base of the “box”.

Gathering some of my favourite embellishments makes the art doll unique. I added a circle of hessian fabric that was hardened with Black Powertex, to support the plaster face because I wanted to tilt her head. Small wooden shapes add interest and the Mdf drop outs were perfect for this. At this stage I decided I wanted to give her two halves.

Powertex Art Doll arranging pieces by Kore Sage
Laying out the pieces

Powertex art doll time, assemble the pieces

To start, get your pieces together with your chosen Powertex and a flat paintbrush. Apply the pocket watch rice paper to the mdf using Easy Coat Matt. Brush it onto the mdf first and lay the paper on top and gently coat with a brush, from the centre outwards. Easy Coat allows any accidental Powertex to be wiped away from the paper. Transparent Powertex will also work but will be less wipeable.

With Black Powertex, start to assemble your doll by painting and sticking the pieces together. Be careful to turn the base panel so the holes are at the bottom. Layer the “frame” underneath the “box” and do not add the bottom panel. Put the “hooks” into place here with the hooks facing forwards. I waited until the textures had been added but you can do it at this stage. Focus on painting the front first and paint the back when it’s dry. At this stage you can start to see how you can decorate your art doll.

Assembling the art doll by Kore Sage
Assembling the Art Doll

While the doll is drying, it’s a great time to prepare any embellishments with acrylic paint, Black and Ivory powertex. Decorate your pieces how you like but at this stage I’m starting to identify which pieces I want to be coloured and which pieces I’m keeping Black or Ivory. Don’t forget the “leg” pieces too, I prepared these with acrylic paints.

Adding texture

When your doll is touch dry use Easy Structure on a plastic palette knife to add thick texture on the wings and around the sides of the body. Use the paste to hide the hard edges where the “frame” part is used to lift up the box. Create indentations and marks on the wings and sides.

At this point I’m also starting to define the two halves of the doll using Ivory Powertex on the box sides and on the rays around her head. Leave this to dry for several hours as the Easy Structure is quite thick in places.

Powertex Art Doll choosing pieces embellishments Kore Sage
Preparing mdf pieces

Rusty Powder

Rusty Powder adds real rust texture and colour. I wanted a dark rust that would show off layers of the transparent acrylic paints on one side but appear very dark on the other side. The mixture I made is Rusty Powder 50/50 with Transparent Powertex and a little white vinegar. Use 3d sand to thicken the mixture and 3d small balls to add texture. Prepare a spray bottle with white vinegar and water and make sure it has plenty of vinegar for a dark rust, about 40%.

Plastic palette knives are perfect for applying the rusty mixture over the wings, head base (not the plaster) and the sides. Paste a little on the “leg” pieces too for texture and colour. Spray these areas generously with the vinegar and water spray and leave it to rust for a few hours before repeating the process. Doing the same again with a slightly weaker rust mixture will give you different shades of rust although this is optional.

Art Doll with Rusty Powder by Kore Sage
Art Doll Texture with Rusty Powder

Acrylic paints

The Secret Art Loft acrylic paints from Powertex UK are easy to blend and their transparency makes them perfect for this project. I layered Red Velvet and Orange Marmalade paints onto the rusty areas but only on the left side of the doll. This defined the halves and brightened one side. I also painted the left side of the plaster face with Red Velvet paint and left it to dry. You can repeat these steps as often as you need to get the colour you like.

Art Doll Acrylic paint by Kore Sage
Adding Colour with Acrylic paint

The body of the art doll

The body of the doll is the “box” part and this is a great place to get creative, it’s like a mini canvas. Your chosen rice paper might determine the style of embellishments you use. The rice paper is already in place but I wanted to add some details to the body. I had already prepared my embellishments for this but didn’t use everything that I’d chosen. Coat a small wooden heart with Red Velvet paint and use transparent Powertex to adhere some Small balls. Paint it again with red paint when dry. Glue the heart and silver key in place with Transparent Powertex.

Paint some tiny circles from the drop outs pack in Black and Ivory Powertex to match the dark and light sides of the doll. The threads you can see criss-crossing over the doll are threads pulled from some hessian fabric. Cut strands roughly to size, cover them in black Powertex and leave to dry on a plastic mat while checking they are straight.

When dry, use Transparent Powertex to stick these into a criss-cross pattern over the box. After this, use the drop out circles to cover the ends of the threads and create a pattern around the edge. Coat the body and the hooks on the right side of the doll with Ivory. Your doll is coming together nicely but there’s something crucial missing!

Powertex art doll body by Kore Sage
Decorating the Body

The doll’s head

Transparent Powertex is perfect as a glue to keep the plaster face in place, slightly tilted to one side. Cut six chunks of Powercotton into thick pieces about 3 inches long to create the hair. Lay them on a non stick mat and use a paintbrush to carefully push Ivory Powertex into the fibres however try to keep the strands fairly straight and not too tangled! Brush down in the same direction until the Powertex is massaged into the fibres. When it’s well coated, curl the pieces around the head and down the side of the doll keeping lots of texture. You could apply hair to both sides of course but I chose to keep the “halves” of the doll.

When I applied the curls they were starting to fall quite flat so I used some Large 3d balls underneath and in her hair to keep it propped up! I just glued them in place with Transparent Powertex. In addition, this added extra texture and where the balls could be seen they looked like bubbles in her hair!

To add a bit of colour and texture to this side, I brushed her face, hair and small cardboard stars with Ivory Powertex, pushed the stars into her hair and sprinkled a little Rusty Powder over the wet Powertex. I spritzed a quick spray of the vinegar and water mixture to get the rusting started and because the spray is strong I didn’t need to repeat it.

Art Doll Face and Hair by Kore Sage
The Face and Hair

Finishing touches

There’s just a few finishing touches before our doll is ready to display. I’ve already painted the “legs” and given them a rust treatment so now I just paint one leg with Ivory to match the light side. Fit paperfasteners through the holes as “knees” and “hips” for the doll so the legs could hang underneath. Dab black Powertex on the paper fasteners to cover their metallic colour.

The tiny padlock was given the rust treatment earlier and was attached with a little jump ring. I chose tiny keys from the Treasure box which were hung on jump rings and then off the hooks at the bottom. Brush a quick flick of Ivory Powertex to add a highlight to the red side of her face and she’s done!

Art Doll finishing touches by Kore Sage
Art Doll finishing touches

I can really recommend the art dolls if you like a project you can get creative with. The clock is next on my list! The design team members have created their own unique art dolls and you can see them here.

Time flies Powertex art doll

Powertex art doll Kore Sage
Powertex Art Doll by Kore Sage

I hope you enjoyed the art dolls project as much as I have. Join us over on Facebook if you have a Powertex project to share, just pop by Powertex Addicts United and join The Powertex Studio group. We love to see your makes and it’s a great place to get some inspiration or ask questions. You can find out more about me and my art on Facebook at Kore Sage Art.

One thought on “Powertex Art Doll Time

We would love to hear from you!

This site uses Akismet to reduce spam. Learn how your comment data is processed.