Penguins – Mini Makes for you and the little ones

Hi Everyone

Well we’re at that time of year again where time just flies by and everything you wanted to get done somehow doesn’t.  So I thought I’d show you a nice easy make that you can do on your own, with friends and with the little ones.

We are going to make penguins and I have to admit they are a little addictive so you may well end up with your own little waddle  – that’s one name for a group of penguins on land, they can also be called a colony or a rookery whereas when they are in water they are called a raft (thanks Google!!).

So lets waddle away and get creating…….

You will need

Powertex Black (approx 75ml)
Powertex Stone Art (approx 20g)
6cm Polystyrene egg
2-3 cm Polystyrene egg
2 x 2-3mm animal eyes
Cocktail Stick
Masking Tape
Plastic container to mix clay in
Brush
Pigments (I opted for orange, white and yellow ochre)
Apron
Disposable Gloves
Optional – Pokey tool
Start by covering your work area with a protective layer.  This could be an waterproof tablecloth, oil cloth or even newspaper.
Break the cocktail stick in 2.  Using one piece connect the 2 eggs together to form a body and head
Place the head at an angle for a more realistic look
Using the masking tape cover the whole shape ensuring that the the transition from the head to the body forms a neck. Place the other piece of cocktail stick on the small egg where the beak will be.  Now coat with a layer of Black Powertex and set aside.
Place approximately 75 ml of Black Powertex into a suitable container (you are going to be mixing this so make sure the sides are high enough) and begin adding the Stone Art, using the non bristle end of your paintbrush begin to stir the mixture.  Add the Stone Art slowly and mix well between each addition.  Keep going until the mixture pulls away from the sides.  Now go in with your gloved hands and knead the mixture bringing together into a firmer clay consistency.  Keep adding more stone art until the clay doesn’t stick to your gloves and there are no white flecks showing.  Make sure you pull the clay apart to check that there are no white flecks inside.
Make sure that the clay isn’t too dry otherwise you will have difficulty covering your penguin. If it is just dip it in a small amount of Powertex and knead it thoroughly.
You can now use the clay or double wrap it in cling film for use later.  So long as you keep it airtight the clay will be useable for several weeks.  This is a bonus as you can make the clay ahead of time and have fun sculpting it later with the children.

 

Take approximately 2/3rds of the clay and roll it into a ball then flatten it into a disc approximately 1/2 cm thick.
Lay it over the beak and onto the head, then using your fingers push it down onto the body thinning it as you go.  Make sure it meets underneath to form a base.  Stand the penguin on your work surface and give it a little wiggle to make sure it will sit without toppling.  If it doesn’t sit properly use a little of the remaining clay to make some feet and/or a tail to support it.
                                      
With the remaining 1/3 clay split it into 2 and form rolls.  Flatten them to around 2mm and shape to form wings.  Attach to the body on the sides.  If your clay has dried, paint on some fresh powertex to stick the wings to. Shape the wings to give your penguin character.
Now make any final adjustments, make sure the beak is a nice shape and push the eyes through the clay into the underlying egg.  You may need to use a pokey tool to make the hole first.
Using the Easy Varnish and pigments dry brush on the colour to complete your penguin.  I opted to colour mine in different ways to make a real mixed waddle.

 

 

Don’t forget, you can always scale it up by using larger eggs to make bigger penguins just remember to increase the amount of clay you make.
I hope you’ve enjoyed this project and look forward to seeing your makes.  Don’t forget to post photos of them over on the Powertex Studio facebook page
Until next time happy creative adventures

 

 

Warwick Poppies and Powertex

 

Hello there

As many of you are aware, in November this year we commemorate the 100th anniversary of the end of the the First World War (The Great War).

Our county church, St Mary’s Warwick, has a history of involvement with the military and is home to the Royal Warwickshire Regimental Chapel and so they have organised a memorial exhibition of handmade poppies to be displayed throughout October and November.

These will be created and donated by the local community and beyond.

The aim is to display over 11,000 poppies to represent the number of men lost from the Royal Warwickshire Regiment.  Each poppy will be unique just like the men who gave their lives.

I contacted the organisers to see if I could help in any way.  They asked if I could work with the Warwickshire Young Carers to help them create their own poppies for this project. A big thank you to  The Art Society – Leamington Spa, who covered the cost of materials.

We decided that creating larger poppies made from individual petals would allow the children to work on their own individual piece but when they then came together as a whole flower, they could see how working as a team created something bigger.  This could then be reflected back on how the soldiers had worked together during the conflict.

For the petals we created a wire form using reclaimed wire, covered this in masking tape, then applied gauze from the local scrap store which had been coated in red Powertex.

A large bag of potpourri, that had been found in a local recycling centre, provided seed heads.  These coated in black Powertex became the poppy centres.

The poppies will be on display during October and November at

Collegiate Church of St Mary, Old Square, Warwick CV34 4RA


To find more details about the Warwick exhibition please click here

 

Click here to find out more about the Warwick fallen of World War I at

Until next time

Happy Creative Adventures

Axx



 

 

 

 

How to build an alternative statue ……..

Hello everyone, Annette here……

I hoped you’ve all had a stunning Summer and are ready for an awesome Autumn.

My challenge this month was to create a statue representing the star sign Virgo……mmm that certainly made the old brain cells fizz.  SO……Virgo is represented by the virgin carrying wheat and she is an Earth sign.  With this knowledge I set off on my creative adventure.

Using the wood and metal base, I pushed this through a polystyrene egg (my egg came in 2 parts so I secured it was making tape around the centre and top to bottom) and then packed the bottom of the spike with foil to stop the egg from slipping down.  I used the egg so that I could get a nice full skirt that was supported underneath.

I then built up the top of the egg so that when the plaster head was seated on top the proportions were more balanced.


To attach the head, I used Grace from the European range,  take a piece of foil and wrap it around the figure just below the shoulders and attach to the plaster with masking tape (only a small amount needs to be on the plaster as this will determine your neckline).

Now open up the pocket you have made, with the foil, and sit it on top of the extended egg.  You may need to tear up the sides slightly to get it to sit properly.  Secure with masking tape making sure it is well attached.

 

As my statue is going to be carrying something, I needed to add hands and arms.  Take a piece of foil and fold it to create a narrow strip.  Place the hands at either end ensuring that the thumbs are pointing upwards at both ends.  Now wrap the foil around the wrists and secure with masking tape.

Take this strip and lay along the back of the plaster head placing the hands to the front.  Check the positioning of the hands and if necessary fold the strip back onto itself behind the shoulders if the arms are too long.  Secure to the back with more masking tape.

Using small pieces of foil fill out the arms and round them out.  Also check that you are happy with the shaping at the waist and the back of the statue, use pieces of foil to build out any areas which need more shaping.

Once you are happy with the overall shape and positioning cover everything with masking tape and then coat the whole statue, including the plaster head, body and base with a layer of Ivory Powertex. Lay a small piece of clingfilm between the hands and body to stop them sticking together.

Now let this dry

For the clothing I used Ivory Powertex and worked it through strips of Natural Paper Decoration for the bodice/sleeves and muslin for the skirt, I used four separate pieces of muslin so that I could shape each piece over the fullness of the egg.  It is also easier to work with smaller pieces that one larger piece.

Let this dry.

I liked her at this stage and would be happy leaving her here however she needed something to represent the Earth sign so…..

I took a piece of Powertex Rice Paper (the one I choose had images of the earth/sun and moon on which fitted perfectly with the Earth sign) and using a wet paintbrush I drew around the shapes I wanted before pulling them from the piece.  This causes a feathered edge which blends into your background better than a cut straight edge.

Using Powertex Easy Coat Matt varnish, I attached the pieces to the dry clothing.  I coated both the clothing and the back of the rice paper then pressed the piece into place.  Using a soft brush starting at the centre of the rice paper smooth it out towards the edges,  this stops it tearing and ensures it is all stuck down.  Now take some more varnish and coat the front of the rice paper ensuring you go over the edges.

Leave this to dry

]

She now needed colour adding in to pull everything together.

On a spare piece of fabric I tried using tea stain to see if this would work but decided it was too flat.

I played around and found that the Powercolor Yellow worked perfectly so I mixed this with Easy Varnish and heavily dry brushed the clothing.

For the hair I mixed the yellow with mocha Powercolor to give it more interest.  The eyeliner and eyebrows are a thin line of Bronze Gold  Colortrix and varnish  and the lipstick is coral Powercolor.

To finish her, I found some seed heads in a nearby field and made a small bunch for her to hold.

 

 

You could make a statue to represent any of the Zodiac star signs and use different rice papers to tie into the specific attributes of the sign.

I hope you’ve enjoyed this project and look forward to seeing what you make.  Don’t forget to post your pictures on our facebook Powertex Addicts United or Powertex Studio

Until next time, happy Creative Adventures

Axx

So what do you do with your spare Powertex??

Hello there

I hope you are well and have enjoyed this lovely Summer.

So here’s the question……..

What do you create with the spare Powertex left in your tub?

You know that little bit you have left when you’ve been slightly too generous with yourself when you’ve been pouring out….

Here are a few of the things I use it for.

1. Coat a spare piece of fabric and a plaster embellishment and create a brooch.

These can either be coloured or left as the base colour so that you can colour them to fit into your future project.

2. Coat a spare piece of fabric, scrunch it up and let it dry.  You now have somewhere to try out your dry brushing colours before going onto a finished piece.  This is great if you want to try something a little different to your normal colour choices.

3. Take a strip of fabric, coat it with the Powertex and roll it into a flower.  Once dry these can be added into a future project.  Again these can be dry brushed at a later date to fit in with your project.

4. Mix it with Stone Art and create a clay,  double wrap this in clingfilm and store in a sealable bag or box and this will last for several weeks.  Alternatively sculpt it into a freeform shape or use it in the moulds to create embellishments.  Again these can be kept until you need them.

 

5. Create a Powertex mask.
Either let the Powertex set in the container or pour it out onto a non stick mat creating a more controlled design.  Leave to set then peel off.


These can be added into projects to give even more layers and textures.

Here the Powertex was left in a round tub and gave a lovely curved effect to sit the skull into.

6.  Take some of your MDF embellishments, coat them with Powertex and apply Rusty Powder, spray with vinegar mix and leave to dry.  You then have ready rusted embellishments at your disposal


I bet you have other ways of using your Powertex,  why not hop onto the Powertex Studio facebook page and share your ideas with everyone.

Until next time happy Creative Adventures

Annette  x

Keepsake Kubes – a unique way to remember…..

Hello there

Our project theme this month is all about keepsakes, mementoes and lovely memories, so in keeping with that I would like to share with you my Keepsake Kube(s) …….there is an extra ‘s’ as I am sure you’ll want to make more than one!!

My Kube has all the memories of a little girl’s first year, I thought it would be lovely to continue building more blocks adding more memories as she grows so that by the time she has her own family she will have a full set of building blocks.

So here we go………

For this project you will need

A cube shape – I used 6 empty wooden mini trays to make mine, as I love to recycle,  however you could use a cardboard box, mdf or even plastic.
Masking tape
Powertex – Transparent
Powertex Easy Coat Mat Varnish
Old clothes – natural fibres work best
Pieces of ribbons, buttons etc
Piece of cardboard
Typewriter or computer/printer

I stacked the trays on top of one another, making sure that the top and bottom were solid sides, then I secured them all together with masking tape and coated them with Powertex.

Don’t forget to give your Powertex a good shake before using and only pour out a little at a time as it is air drying.

If you are using cardboard or plastic,  cover with the masking tape and coat with Powertex ( for cardboard – coat one side at a time, letting it dry in between to prevent the cardboard from sagging).  You can always speed your drying time up by using a hairdryer.

If you are using MDF then apply a layer of transparent directly to the base to help seal it.

I then took a selection of baby clothes and other memorabilia  – and cut out interesting bits eg embroidered motifs, metal fastenings, pieces of the base fabric, lace edgings, buttons, ribbons etc

I laid these out on the cube to see which pieces looked best where and once I was happy I coated each piece with transparent Powertex and then placed it on the cube giving it a firm push to make sure it was properly adhered.  I layered the motifs on top of the base fabrics after they had been coated in the Powertex. It is best to work on one side at a time allowing it to dry thoroughly, this way nothing will fall off as you are turning the cube over.

💡Why not use pinking shears to give your pieces a funky edge and prevent fraying.


When working with the transparent, make sure you take your time to cover all of the fabric as it can be difficult to see where you have been and remember although the Powertex will look milky when you pour it out, once dry it will be transparent.

To attach the plastic buttons I used a dab of Easy Coat Matt varnish.

 

I worked the 3D bears head last as this would take more time to dry.  I then left the cube for a couple of days to allow the bear to completely firm up.

I created the tags by using a good old fashioned typewriter and cardboard, you can also create the tags on the computer and print them off or hand write them with a waterproof pen.

 

When the fabric cube is completely dry, attach the tags again by using the Easy Matt Varnish.  I applied a coat of varnish over the top of the tags as well to make sure they were secure.

Now have a good look at the cube, does it need anything extra adding?  – don’t forget with Powertex you can continue to add onto already hardened items.

💡So now you’ve created your first cube, what will be on your next one?  How about one just for the school years, or their budding football career, a unique 21st birthday or even a wedding day keepsake with confetti etc……

I hope you have enjoyed this project and don’t forget to share your makes with us over on our facebook page – The Powertex Studio. or why not continue your Powertex adventures by joining your local tutor on a workshop.

Until next time

Happy Creative Adventures

Annette

Why I LOVE Stoneart…………

Hello there

I hope you’ve been enjoying the recent spell of warm weather and haven’t been too affected by those nasty thunderstorms…..living in the Midlands we’ve had the joy of both ends of the weather spectrum!!

This month I wanted to share with you my absolute love for Stone Art so I took the monthly theme from Powertex UK and created a masquerade statue using Stone Art in its various forms mixed with Black Powertex.

Stone Art is a unique fiber-composition which has been especially designed for use with Powertex Universal Mediums. 

The reason I love working with this product is the total flexibility you have with it.  You can use it with any of the Powertex Universal Medium colours although I choose not to use the transparent unless I’m adding pigment in to colour it at the same time.

To start off you can layer it on top of a coat of Powertex, press in to form a bond then gently wipe away the excess into a pot for reuse later.  By repeating this process you can build up the stone effect on canvas, polystyrene, wood etc and you waste nothing as all of the excess can be reused.  Polishing the layers with your hand will cause a more natural effect and will cause the darker areas to have a slight sheen.

Next you can mix your Powertex Universal Medium with the Stone Art in a pot to create a slurry of various consistencies.  In its loosest state you can paint this onto any surface to give a rustic texture.  As it gets thicker, you can use a palate knife to spread over your base.  The thicker the mixture the more control you have over it.

 

Finally you can go all the way and make up Stone Art clay by adding more powder to the slurry stage and then kneading (like bread) to make sure all the white has been absorbed into the coloured liquid.  Again you can choose how firm you mix this before working with it.  When covering statues etc I keep mine on the tacky side so that I can blend in any joins.   However when working on a canvas, I tend to make it firmer so that I can imprint into it with stamps and stencils, these imprints will come out with a rustic feel due to the nature of the clay.  In this firm state you can also use it in silicon moulds to create beautiful embellishments.

I finished my statue by adding the venetian mask from the Powertex range, I coated with black Powertex and then dry brushed with Rich Gold pigment.  As a finishing touch I tucked feathers into the collar…..after all this is all about masquerade!

Until next time Happy Creative Adventures and don’t forget to post your makes on the Powertex facebook page

Axx

Wedding Day Wish Box

 

Hello there
I used the Frame kit available at Kirsties Handmade Fair, Ragley Hall to create a Wedding Day Wish Box for the happy couple.  Simply write your wish or words of wisdom onto the paper heart, tear off and place in the box for the happy couple to read later.
I opted for Ivory Powertex and a variety of lace pieces to create this special gift.  I hope you enjoy this project and feel free to alter it as you go,  that’s the fun of being creative.

 

I started by using a recycled cardboard box that was the same size as the frame.  I coated this with 2 layers of Powertex to firm it up.  I also coated the frame with a layer of Powertex.

Once dry I placed the frame onto the box and drew around the inside of the heart (push out the heart shape if it is still attached to the base) and then cut that out with a craft knife.

Then I painted the inside of the box at the back that was now exposed.  I also painted the back of the frame and repainted the front of the box and stuck the two together.

I used various pieces of lace to create a patchwork effect on the box.

All lace needs to be coated with Powertex so that is is covered but not dripping.

Firstly,  I took a piece of lace and used the heart as a template.  I cut this out so that the lace fit snugly around the opening.  Coat this in Powertex and place around the opening making sure you press it firmly onto the box.

I then worked my way around the box with all the different laces, laying them in different directions to create interest.

The lace heart I cut out in the earlier step was placed inside the box and the edge of the cut out was covered with a thinner lace ribbon.

Once this was all covered I set it aside.

I took some lace ribbon, dipped it into the Powertex and squeezed out the excess, I then wrapped this to create flowers.  In each corner I used a small piece of gauze that had been dipped in Powertex to sit the flowers into.

Now allow this all to dry thoroughly.

There are lots of videos on YouTube if you’re not sure how to make these.

I have coloured these here so you can see them more easily

For the notepad holder, I used the back of the frame and coated one side with Powertex.  I then placed this onto the back of the wallpaper and allowed it to dry.

Using sharp scissors I cut around the edges, painted the back with Powertex,  then using lace ribbon I added a pretty border.

 


  


For the notepad itself, I used the heart on some thick paper and drew around it making sure I marked the holes.

I cut out the sheets and used a hole punch to make the holes, then threaded ribbon through to hold the together.

I painted the mdf heart burst embellishment and the mdf heart and layered them up ready to tie onto the ribbon as a paperweight.

If you wanted to you could drill holes through the notepad holder and tie the paper onto this to make it totally secure.

For the photograph, I used a laser copy as these don’t smudge.

I worked out where I wanted the heart to sit on the photograph and marked the back of the paper accordingly.

I painted a thin layer of Powertex onto the back of the paper and another layer onto the heart then placed them together.  I turned them over and smoothed out the picture to ensure there are no air bubbles or creases.  Make sure your hands are clean or better still put a piece of kitchen roll on top to protect the picture.

I left this to dry before cutting away the excess with sharp scissors.

I painted the back of the heart with Powertex then added a delicate edge by using lace ribbon dipped in Powertex.

I attached it to the box using a cushion of gauze dipped in Powertex.

I coated the key plate with several layers of Powertex and printed off “wedding day wishes”  but you could hand write this.  I used Powertex to stick the edges to the back of the key plate and then onto the box.
I dry brushed the piece with a combination of burgundy and rich gold however you could match the colours to the wedding party colours for that personal touch.
I hope you’ve enjoyed this project and it has inspired you to have a go.  Don’t forget to post your makes on the Powertex Studio Facebook page as we love to see what you’ve created.
Until next time Happy Creative Adventures
Axx

 

Sassy Seahorse’s day at the beach

Hello there
Welcome to my Sassy Seahorse project, getting her ready for her day at the beach.
For this project I used the Seahorse project pack available at Kirsties handmade fair at Ragley Hall with Black Powertex and a child’s old skirt.
Don’t forget to cover your work surface with plastic, wear an apron and gloves.

 

Start off by joining the two halves of the seahorse together with the rectangle of mdf and at the same time add the hanger.  Use a layer of any Powertex to do this. Allow this to dry.

Place a layer of Powertex onto the front of the seahorse and place the wallpaper directly onto this.  Don’t worry if you have to piece isn’t big enough to cover in one go, piece it together as once it is all coated in Powertex it will not be noticeable.

 

 

Once dry cut around the shape and then coat the wallpaper with a layer of Powertex.

Now take your chosen fabric and dip it into the Powertex, I pour mine into an old plastic container a little at a time.  Dip your fabric and work the Powertex through it making sure it is completely covered but not dripping.

Then place it onto the seahorse wherever you decided,

I used the pretty edging as a bikini skirt and the ties from the waist as the bikini top.  Any fabric buttons or metal ties can also be used to add more interest to your design.

 

Next I took the mdf embellishments and coated them in Powertex

I layered up the two heart bursts with one of the flowers to make an eye.

The paper flowers became her headdress.

Three fabric buttons from the skirt had mdf flowers placed on top of them to make her necklace

The final flower became her belly tattoo.

 

Now set aside to dry, if you can’t wait you can always use a hairdryer to speed up the process.  I used my gloves to prop up the skirt so that it dried in a wave shape.  Powertex doesn’t stick to plastic so its great to use to help form shapes as you simply pull it out once the piece has dried
Finally, I used the easy varnish along with turquoise, burgundy, white and rich gold to dry brush the colour into the piece.
To dry brush, place a 5p sized amount of varnish onto your plastic work surface,  dip your brush into the varnish then straight into the pigment (work from the pot as the varnish does not contaminate it).  Now mix to a thick paste on a clean area of your work surface.  Take a piece of kitchen roll and wipe off the excess colour, then holding the brush flat to your work brush across the raise areas.
To add a more opaque covering hold the brush loosely at the end and dust across the area.  The more times you go across the deeper the colour will be.
Don’t be afraid to mix your pigments together to create different shades and effects, the combinations are limitless.
If you want to place this outside, make sure that you coat the back and sides with Powertex to complete seal the mdf then allow it to dry in the house for three weeks.
Well Sassy is ready for her day at the beach and she hopes your sea horses will be along to join her.  Don’t forget to post your makes on the Powertex Studio Facebook page, we love to see what you create.
Until next time Happy Creative Adventures
Annette



Cheshire Cat on the Mad Hatter’s Hat

Hello there,
I had a great time with the Top Hat kit that I wanted to share with you how I created the Cheshire cat on the Hat that was shown on the Hochanda show with Tracey Evans.
Along with the kit I used the mdf Alice and Grin embellishments.
To start with I assembled the hat using the hat band on the back and front to secure it, then I prepped all of the embellishments so that they were ready to place in the fabric whilst it was still wet

I started by using clear domes to create the eyes.  Using Powercolor black pigment mixed with Easy Varnish I painted the iris onto the flat side of the dome, let that dry completely then cover the whole of flat side with the Key Lime paint repeat this several times to get the depth of colour but let it dry between layers. Set aside.

Using the beautifully bright acrylic paints coat the letters, grin and Alice.  Don’t forget the sides. Set aside.

Take the mdf playing cards and using a craft knife carefully cut the shape from the top of the card and use this to fill in the gap in the centre.  Coat the card with a layer of Ivory Powertex, let it dry completely.  Using a wet paintbrush draw around the image on the rice paper and gently pull away the areas not needed.

Coat the mdf playing card with varnish then lay the rice paper image on  top,  using more varnish go over the top of the image and sides of the card pressing gently to adhere.

When dry coat the edge of the card with Powertex Black.

 

For the ears, mix up Powertex Black and Stone Art into a clay (when it no longer sticks to your hands its ready).  Shape two ears and set aside to dry.  Make sure you have a flat area that will sit nicely on the hat.

 

Whilst everything was drying I laid out the stripes on my cat, here is is shown using tin foil however as I had extra Stone Art clay I used that to make the stripes.

For the tail, I removed the quill part of the feather and used the Stone Art to depict the stripes.

Once I had them in position I painted the whole of the hat and tail in Black Powertex.

Using gauze and Black Powertex I then covered these making sure you press around the raised areas to get definition for the stripes.  Place the eyes and use a small piece of gauze to create eyelids.

Whilst this is wet place your letters, ears ( you may need to add additional Powertex to the flat part to ensure a good bond), Alice, Grin, Playing cards and the tail.  Use additional gauze to build underneath any embellishments that need more support.  Let dry

I then dry brushed the stripes and ears with a combination of the Blueberry Pie paint, Raspberry Sorbet paint and white pigment to get the shading.

I hope you have as much fun with the kit as I did and don’t forget to post your makes on our Powertex Studio Facebook page.

Happy Creative Adventures

Axx

 

We’re all mad here

“How do you know I’m mad?” said Alice. “You must be,” said the Cat, “or you wouldn’t have come here.” – Lewis Caroll

Oh my gosh, isn’t this Cheshire cat hat by Annette just adorable.

Used tea leaves mixed with ivory texture on the mouse and used tea bag papers on the cup! Ingenious….
Annette Smyth DT 2018

It wouldn’t be an Abigail project if there wasn’t a rainbow of colour in there. Love this!

Abigail Lagden DT 2018

 

I would hope that my make would be mad enough for the hatter. I loved working with these bright colours and another fabulous theme from our Tracey.

Well, it wouldn’t have been right if I hadn’t of made a journal now would it?

Anna Emelia Howlett DT 2018
I’m so in love with the colours on these designs by Kore. Nice and bright. Just what I love!

Kore Sage DT 2018

Our Tracey will be showing you the techniques so you can re-create some stunning works of art in time for your tea party. Are you ready to join us in wonderland? Don’t be late. Tune in or look on catch up online for the shows which will be airing at 12pm and 4pm. Free view 85, Sky 663 or free sat 817 Let us know what you thought on our Facebook page. And if you need any extra guidance from a local tutor contact us at Powertex UK and we can put you in touch. Toodles Anna xXx