Cow skull and flowers wall hanging

Designer:  Jill Cullum

When I received the mould for the Cow Skull and Flowers I was immediately drawn to a Native American reservation.  Speaking to a friend she told me it reminded her of the Navajo tribe.  When I searched this I found the colours used in their art and pottery were beautifully vibrant.  What better than to have a lovely wall hanging with a nod to the Navajo art culture.

Materials Used

Preparation

Use Powertex Stone Art clay to make a cow skull and flowers from the mould
Stone Art clay skull and flowers

Using Stone Art Clay and the Cow Skull and Flowers Mould, make a cow and several flowers.  Put to one side to dry.

Dreamcatcher Ring

Dreamcatcher ring
Dreamcatcher ring with paperdecoration

Add texture to 3 of the rings – 2 using Paper Decoration, Light Pink and one with string.  Leave to dry.

Using 2 of the solid circles create a background texture of your choice, with Ivory Fabric Hardener.

MDF Frame and Panel

Mdf frame with paperdecoration
Add textures to the mdf frame

Use Stone Art Clay and Texture Paste to add interest background.  For the front use Paper Decoration Natural with Ivory Fabric Hardener.

Hanger – Make a Branch

Make a hanger
Create the hanger

Use twisted cardboard tubing and tinfoil, adding texture with more Paperdecoration. At the same time secure string in place to use later.

Feathers and Colouring

Acrylic inks to decorate the mdf feathers
Colour with acrylic inks

Using Acrylic Ink, add colour to the feathers and the pre-prepared rings.

Use Brown Bister spray
Spray with Bister

Use Brown Bister to add colour to the Cow Skull and the flowers. Also do this to the centre panel of the MDF frame and branch.

Colour the textures with acrylic inks

Use the Acrylic inks to add colour to the outer section of the MDF frame.

Transparent Powertex to fix the skull and flowers to the wall art
Transparent Powertex to fix the skull and flowers

Using the solid ring from the dreamcatcher kit, fix the skull and flowers using Transparent Powertex.

Putting it all together

Powertex wall art with cow skull and flowers
Powertex wall art with cow skull and flowers

Attach the Skull circle to the centre panel on the mdf frame. Attach more string to the circles and the MDF panel (I used Transparent Fabric Hardener). Finally fix the feathers in place to create your beautiful Navajo Indian Wall hanging.

I really hope you enjoyed this article and it has inspired you to use the MDF, Cow Skull and Flower mould in a different way.

Show us your ‘makes’ here in the The Powertex Studio. We love to see what Powertex Addicts create. If you need more inspiration take a look at this beautiful wall art with a Venetian feel, by Gill Goldsmith.

Get making, be creative, but most of all have fun 🙂 Bye for now, Jill x

Acrylic inks

Secret Art Loft acrylic ink sprays at Powertex UK

The spray acrylic inks add vibrant colour to your Powertex mixed media art and crafts. The inks are transparent so they can be layered and blended into each other for juicy colour.

This month there is 10% off Tracey Evans’ range of Secret Art Loft acrylic ink sprays at Powertex UK.

Take a look at these gorgeous samples using the acrylic inks, from Powertex tutors. They use Powertex Universal Medium with mdf, fabric, clay and texture mediums with the inks for stunning projects.

Annette Smyth mdf frame with cow skull, Powertex and acrylic inks
Mixed media art by Annette Smyth
Patricia Williams lighthouse Powertex triptych
Sea triptych by Patricia Williams

Use the ink sprays on figures and sculpture

Wendy Reed bright acrylic ink geisha sculpture
Geisha figure by Wendy Reed
Buddha box by Annette Smyth
Buddha box by Annette Smyth
Japanese fish Powertex sculpture by Annette Smyth
Fish sculpture by Annette Smyth

The inks are available in a range of colours including metallics

Cow skull art
Cow skull art by Kore Sage
Mermaids by Patricia Williams
Mermaids by Patricia Williams
Wall letters by Samantha Thompson

Add textures with clay, mdf and fabric

Cow skull dream catcher by Donna Mcghie with Powertex acrylic inks
Dreamcatcher by Donna Mcghie

Donna has written a step by step tutorial for her dreamcatcher art.

Shell North Powertex box with cow skull
Cow skull box by Shell North
Fi Potter tea cups
Tea set by Fi Potter
Fairy door by Kore Sage with Powertex acrylic inks
Fairy door by Kore Sage

The acrylic inks are on special offer in October with 10% off to celebrate Tracey’s birthday. The gorgeous colours available are Raspberry, Aqua, Palm, Viola, Egg yolk, Tangerine, Deep sea, Lava and Damson. There’s also 5 metallic inks in Aqua, Golden, Copper penny, Silver sixpence and Coral pearl.

Shop now to take advantage of this offer. If you have any questions about using the acrylic inks you can always head to the Powertex Studio Facebook group for advice.

Powertex Dreamcatcher

Designed by Donna Mcghie

Powertex dreamcatcher by Donna Mcghie
Step by step guide to creating a Powertex Dream Catcher

The story behind my Powertex dreamcatcher. I will always have a bit of a soft spot for dream catchers.  When my daughter was young she suffered awfully from night terrors. 

We tried many techniques to get her to have a peaceful night, and spoke to many professionals as well.  One of the things we tried,  hoping that it would help her even if just a through a placebo effect was a dream catcher. 

I’d be lying if I said she slept perfectly once we hung up her dream catcher. The thought of it catching those bad dreams and holding them at bay definitely had a calming effect on her before she closed her eyes at bedtime to go to sleep.

Thankfully those days are long behind us now, and my daughter is now a young woman.  But she has seen the dream catcher shown here and I know this is something she would still hang up in her bedroom or living room.

For this dream catcher I used the gorgeous ink sprays now available from Powertex UK.  I just love how vibrant and easy to use these are, and how they automatically blend into each other to create almost an air brushed effect. 

Materials List

How to make my Powertex dreamcatcher

Prepare the frame

Prepare the frame
This mdf frame is so easy to use


Paint the Powertex mdf frame and panel with Ivory Fabric Hardener and set aside to dry.

Mix up Stone Art clay

Mix up Stone Art Clay
I used the mould for one cow’s head, but made lots of the flowers to add onto my final design

Mix up  Stone Art with Ivory Fabric Hardener to form a clay. I  pressed this into the Cow Skull and Flowers mould.

Spray with acrylic inks

Spray with acrylic inks
I put the small raised square to one side for now and only sprayed the larger piece

I wanted to create a surreal dreamy effect, so popped out the shapes from the MDF Dream Catchers and used them as stencils, spraying over with my ink sprays randomly.

Add Easy Structure texture

Add easy structure feathers
The easy structure adds texture to the design

Put Easy Structure onto a pallet knife and smear it through a leaf stencil.  I also sponged silver acrylic onto the leaves.

Use Bister spray for depth

Use Bister sprays for depth
Bister gives added depth to the design.

I added more texture by soaking my natural paperdecoration in transparent hardener and placing around the edges. I also sprayed the edges with Mahogany Bister Spray.

Lay out Paperdecoration

Using Paperdecoration
I sprayed the cow’s head with acrylics to keep in with my colour scheme

Put together the inner section and add paperdecoration (soaked in transparent hardener) and the cow’s head. I did not glue it in just yet.

Layering paperdecoration
Once I was happy with this section, I secured it onto the larger piece.

I soaked my light pink paperdecoration in transparent fabric hardener and add this to my design also.

Mdf feathers

mdf feathers
Once the easy structure was dry I painted my feathers with Raspberry Sorbet Acrylic and also dry brushed them.

My next step was to add texture to my mdf feathers by using the Easy Structure and my feather stencil. I put them to one side to dry.

Paint and add clay flowers

Stone Art clay flowers
I used lots of these little flowers

Painted all the small flowers with Acrylic Paint and once dry, dry brush with White Powercolor.

Add crochet fabric

Create the dreamcatcher
If you are clever enough crochet your own middle, or do what I do and scour the charity shops

I soaked some crochet in the Ivory Hardener and secured it into the mdf circles. Once dry, I sprayed with my inks and added flowers

Glue the pieces together

Glue the dreamcatcher pieces together with Powertex
My mdf feathers are glued to the dream catcher to help secure the whole piece together

Glue the dream catcher into place and add feathers to the design.

Dry brushing

Powertex dream catcher with feathers by Donna Mcghie
The finished Dream Catcher

Finally I dry brushed my whole piece using the interference pigments and the white Powercolor.

Finishing Touches

The interference colours were gorgeous to use with this project, as I honestly do think they have a dreamy quality to them.  I also used a sponge to add just a touch of the aqua ink to the tips of the feathers. I felt they needed something extra to help them blend in. 

TOP TIP: I was slightly concerned about the dream catcher adhering to the square, but found by putting glue on both the top of the dream catcher, and also the larger feathers it secured on nicely.

That’s all from me for this month. If you’ve enjoyed this Powertex dreamcatcher, I would be really grateful if you popped over to check out my Facebook page as well. You can also see my last design team project that’s great for Halloween.

Until next time, keep powertexing 🙂

Fabulous Frames

By Annette Smyth

Hello there,

Did you catch Tracey Evans on Hochanda on 27th September? if not click here to go to the Hochanda site and watch the shows on rewind at 11am and 3pm. If you did then you will have seen the amazing frames and panels now available from Powertex UK.

The frames are constructed from MDF and provide a beautifully stable base to apply all the lovely Powertex textures onto.

They come in 2 options.

I fell in love with these beauties when I saw them and have been creating like crazy with them. Here are a few of my makes.

Fabulous frames

Mixed Media

I created these pieces using the MDF frame and panel, they are coated in a base of Ivory Powertex and Easy Structure. Texture was added with stencils, mark making, MDF lettering, Powercotton, Paperdecoration and 3D Sand and Balls.

Secret Art Loft acrylic inks were then sprayed on to give the base colours and enhanced with the Secret Art Loft acrylic paints as the colours match perfectly. A little bit of bling was added with gems and silver leaf.

Africa themed mdf frame by Annette Smyth

It’s all about Africa

This piece was also created on the MDF Frame and Panel. This time I used Ivory Powertex along with Easy 3D Flex and 3D Sand to create the base texture.

The mdf additions – trees and letters, were all coated with Powertex Bronze and then stencilled on using Easy Structure to give texture.

The plaster torso (African Semi Prince) was also coated in Powertex Bronze.

A rice paper image was added to the central area using Easy Coat Mat before the lettering was added on top

The whole piece was then drybrushed with Powercolour pigments using Easy Varnish and the same pigments mixed with Powerwax were used to give the depth of colour on the frame area.

Cow skull Powertex art by Annette Smyth

Cow Skull Dreaming

For this piece I used the same frame but combined it with the Dreamcatcher MDF set which I stencilled onto using Easy structure. I used StoneArt clay in the new Cow Skull mould to create the focal point and added lots of extra flowers.

The base was Ivory Powertex and the additional texture is from cardboard, Powercotton, dishcloth, Paperdecoration and 3D Sand and Balls.

Again I used the Secret Art Loft acrylic inks and paints for colouring.

Powertex art by Annette Smyth

Heading East

For the Eastern themed pieces I chose to use the MDF Inset Frame and Panel. The plaster Buddha sits beautifully inside the opening with lots of room around the edges to add texture and colour and the lovely MDF symbols.

The top panel uses Black Powertex, Easy Structure, Hessian and 3D Sand and Balls. Once dry I used Easy Varnish and Rich Gold pigment to add the highlights.

The lower piece used Ivory Powertex, stencilling and texture with Easy Structure. The acrylic inks and paints provide the intense colour and Easy Varnish with Rich Gold pigment was used for the highlights.

Keep an eye out on this Powertex Magazine for some fantastic step by step articles from my design team colleagues. They will show you other amazing projects you can create using these frames.

We love to see what you create so please post your makes on our Facebook group, The Powertex Studio. Inspire others to have a go.

See more of my work or join me for a workshop at my home studio in Leamington Spa. Please take a look at my website www.annettesmyth.co.uk or contact me via my Facebook page.

Until next time Happy Creative Adventures.

Axx

Rusty letter art

The Secret Art Box – August 2019

Designer – Kore Sage

The August Secret Art Box included a personalised initial in mdf, a stencil, papers, a quote stamp and textured fabrics. Also Lead Powertex fabric hardener and colour pigments were in Aqua ink and Blue Bister granules. There was so much in the box to use but I knew straight away that I wanted to use Rusty Powder with the mdf, ink and Bister to create rusty letter art.

Powertex UK secret art box august 2019
Powertex UK Secret Art Box August

Materials list

  • Tag
  • Lead Powertex Fabric Hardener
  • Printed papers
  • Pieces of fabrics
  • Mdf letter
  • Aqua ink spray
  • Bister granules
  • Powercotton

Optional and other supplies

Powertex Rusty Letter wall art
Rusty Letter Art by Kore Sage

1. Make a start

Step 1
Step 1

Laying down the first textures with printed papers and Lead Powertex Fabric Hardener to cover the canvas.

2. Create background textures

Step 2 Easy Structure
Step 2

Use Easy Structure with a plastic palette knife through the stencil. Clean your stencil straight away.

3. Build fabric layers

Step 3 adding fabric with Powertex
Step 3

I added fabric textures to build up a background for the mdf letter. Lead Powertex hardens and adheres the fabric. Use a hairdryer to dry.

4. Add mdf letters and shapes

Step 4 Adding MDF with White Powertex
Step 4

To create depth I used White Powertex to paint and glue the mdf letter and shapes. I painted it lightly over most of the background. Dry with a hairdryer.

TIP: Ivory Powertex Fabric Hardener will also work well if you don’t have White.

5. Spray Aqua ink

Step 5 Spray on Aqua Acrylic ink
Step 5

Spray the Aqua ink generously over the textures, let it pool, drip and run off to the side.

6. Add Rusty Powder

Mix up 1 tbsp Transparent Powertex with a little white vinegar and 1/2 – 1 tbsp Rusty Powder. Pour onto the letter, background and fabrics. (It will look grey and the rust will take a few hours to form.)

TIP: For a thicker rust mixture add 3D Sand or Small balls

7. Using Bister granules

Add spots of Transparent Powertex and sprinkle Bister granules onto wet areas. Spray with water and vinegar spray so the colour runs.

TIP: Using white vinegar in the water spray alters the colour of the Bister and encourages the rust.

Step 6 Sprinkle on Blue Bister granules
Step 6 and 7
Step 7 Rusty Powder
Step 6 and 7 rusted

Powercotton vines

Step 8 Powercotton
Step 8

I used Powercotton strands coated with White Powertex to look like vines around the letter.

Brush up highlights

Step 9 White Powertex Highlights
Step 9

White Powertex is dry brushed on highlights over the whole canvas using a flat brush.

Finishing touches

I repeated the Rusty Powder and Bister granules until I was happy with the contrast. Highlighting with White or Ivory Powertex at the end just lifts the letters away from the background. You can layer up as much as you like.

Powertex rusty letter art by Kore Sage
Powertex Rusty Letter Art by Kore Sage

There’s so much left in the Secret Art Box I’ll be making more with these supplies. Tutor Gill has also used this month’s subscription box here.

Keep an eye on The Powertex Studio and my Facebook Page where I’ll be posting my Powertex art. Join us at Powertex Addicts United where you can share your makes.

You can find all the details on the Powertex UK website for your own Powertex subscription box, along with many of these supplies.

Until next time, make some time to let your art out,

Kore x

New Metallic Tag project pack

Powertex UK New Metallic tag project pack

Designer – Tracey Evans

There’s a new project pack available from Powertex UK and Tracey has a tutorial for you to create this gorgeous metallic tag with a beautiful mdf letter, that’s personalised to you.

Powertex UK New Metallic tag project pack
Personalised Metallic Tag project by Tracey Evans

Tutorial

Tracey Evans, the creative director at Powertex UK uses Lead Powertex Fabric Hardener and the new Aqua acrylic ink in this tag. Use the fantastic textured fabric to create a background for your mdf letter and Powercotton for detail. Finish off your project with metallic pigments.

Metallic tutorial by Tracey Evans

Get your Metallic Tag project pack

If you would like to try the Metallic Tag Project Pack, you can find all the details on the website. The pack is available with or without Powertex and you can choose the letter you wish too.

If you have some Powertex creations to share we’d love to see them in the Powertex Studio on Facebook. Join us in Powertex Addicts United for inspiration and tips for getting the most out of your Powertex products.

Planet in the Night Sky

A fantasy planet

Designer – Jill Cullum

Planet in the night sky in Powertex by Jill Cullum
Powertex Planet in the Night Sky by Jill Cullum

For my planet in the night sky, inspiration came from warm summer nights, sat in the garden, looking out for shooting stars. I decided to try and replicate one of the planets. Hmmm, once started though, my imagination overtook and the finished article became much more magical.

Easy 3d flex makes beautiful cracks and texture. Experiment using different mediums to add colours. Here I have used layers of inks and acrylics, with a final layer of wax.

As you will see from the photographs, things changed along the way. This is what I love about mixed media. Some layers get covered, some peak through. It’s all part of the journey of creating what you love. Just go with it!

The Secret Art Loft acrylics and inks work wonderfully for layering up. Their translucent quality makes blending easy, and the metallic inks look like molten metal.

Top tip

I find it is really important with mixed media, to let each layer dry thoroughly before moving onto the next. Not an easy one for me, as I am an impatient crafter. However, your layers will become muddy if they aren’t dry.

Materials list

Creating a base

Creating a base for the planet with Powertex
Step 1 – creating a base

Pour Powertex liquid colour onto the canvas. Spray with Bister of a different colour then dry with a hairdryer, to create the crackle effect.

Add texture by creating a heavy crackle effect

Adding more texture to your planet base with Easy 3d Flex
Step 2 – adding texture

Mix Easy 3d flex with Ivory Powertex to create a clay. Layer over half of the canvas. Dry with hair-dryer spraying lightly with blue bister during the process.

Creating further texture

Use Powertex and fabric and clay to add texture layers to your planet
Step 3 – creating further texture

Using material, coated in Ivory Powertex and small ‘craters’ made from the 3d flex clay, build the layers of your planet.

Adding colour

Add green colours to the cracked areas of the planet
Step 4 – adding colour

Start by adding green ink to the deep cracked area and violet acrylic to the green side of the planet.

Building layers

add clay craters and shapes to the surface
Step 5 – building layers

Using greens, pinks and purples, layer the craters, blending as you go. Paint the material section with black acrylic, then add layers of metallic acrylic.

Powerwax

Use Powerwax mixed with powder pigment to layer on colour to your planet textures
Step 6 – Powerwax

On the side created by 3d flex, add a layer of Powerwax, mixed with pigment. Once dry, wipe with a damp sponge to add interest.

Finishing Touches

I decided my fantasy planet needed a touch more ‘bling’ so I added a few beads, blending in with the colours I had chosen along the way. The joys of creating a fantasy planet are that you can really be free with your choice of colours and the texture that you create. It’s nice not to be too rigid in your planning, as planets evolve, then so should a piece of art.

Planet in the night sky

Powertex planet in the night sky by Jill Cullum
Powertex planet in the night sky

I am looking forward to seeing lots of new planets, so feel free to share them in the Powertex Studio.

If you would like further planet inspiration take a look at this blog from Annette Smyth. Or why not join me for a workshop to create your own planet. Bye for now, Jill x

A kelp forest – under the sea

Kelp Forest by Fiona Potter

It was a beautiful, clear blue sky morning in the glorious heat of Summer 2018 we arrived at Porthgwarra Beach in far west Cornwall just as the tide was receding.  It’s such a beautiful cove and we kept spotting something in the water around the rocks and went to investigate.  It was a whole area of kelp – a Kelp Forest! Wandering through the pools left by the tide there were beautiful shells, stones and shiny pebbles.  This was my inspiration for this Under the Sea piece.

Kelp Forest by Fiona Potter
Under the sea: Kelp Forest

Supplies

How to make a Powertex kelp forest

Step 1: The ingredients
Step 2 - Setting in the wires

Step 1: Use either Stone Art or other air dry clay to push into moulds, leave to dry. Cut 9 or 10 lengths of wire and randomly drill holes into the mdf base.

Tip: I had a tennis ball size piece of Stone Art clay left over from a previous project that I kept. Spray water lightly over a piece of clingfilm which I wrapped tightly around the clay. I sealed it in a reusable plastic bag.

Step 2: Push wires into holes, secure with masking tape then rip lengths of masking tape sticking it the full length of both sides of the wire to create lengths of kelp.

The base

Step 3: Building the composition

Decorate the base

Step 3: Build a thick random layer of Easy Structure on the base, push shells, moulded sea shapes etc into the easy structure. Spray with bisters, set aside to dry.

Tip: If you use a large central shell like I did, it is worth masking off with some cling film or paper before you spray with bister

Step 4: Washing back and adding a top layer

The kelp

Step 4: Wash back the bister from shells and shapes. Use red ochre to colour some of the coral like shapes. Add a generous layer of transparent Powertex fabric harder on the base and drop in mixed art stones.

Step5: Adding the Kelp

Metallic colours

Step 6: Bringing out the colour

Step 5: Rip up lengths of pale green tissue paper and paste onto the kelp using transparent Powertex. Leave to dry. Transparent Powertex helps to keep the transparency.

Tips: Paint the transparent Powertex onto the masking tape and press the tissue onto it with a Powertex soaked brush.

Step 6: Using the blues and greens metallic pigments bring out the highlights of the bottom of the sea.  Brush Mojito Lime and Golden Olive, Limoncello Gold randomly on the kelp. If you leave lighter patches the sun will shine through enhancing the kelp.

Leave it in a place where you get the sun. Watch it at various times of the day to see where the sun lands and where you might want to add further metallics and maybe a pearl or crystal.

I hope this easy but interesting focal piece inspires you to create your own under the sea project. You might also like this lovely fish sculpture project by Annette.

Don’t forget to share your makes in The Powertex Studio and if you can give me a shout out that would be awesome.

That’s me for now, check back in June when I’m upcycling one of my early Angels that has been keeping watch in my garden for the last couple of years.

Bye for now

Fi

Powertex Kelp Forest by Fiona Potter
Powertex Kelp Forest by Fiona Potter

Powertex family project

A Tryptich with a Twist – by Annette Smyth

Powertex family project, sea theme

Hello,

This month I thought I would show you a Powertex family project. This is one that you could share with the children during the Easter holidays. So this article shows you how to make a piece of family art suitable for indoor use. It breaks down nicely into mini projects which all come together towards the end.

Why not let each family member decorate their own hoop, making this a real Powertex family project to treasure.

There is no limit to the number of hoops you can connect. Just ensure the whole structure is stable and check for balance when connecting them all together.

Powertex family project, sea theme

Here’s the twist, the hoops can be worked on either side (flat or recessed) and hung either way. So if your base fabric is fine you get a lovely silhouette if hung in a window with the decorated side facing outside. You could even suspend it and let it gently twist in the breeze getting the best of both worlds.

Or why not mix it up and have hoops facing in different directions?

Heres are the products that I used

– Set of 3 unvarnished wooden embroidery hoops
– muslin fabric
Powertex translucent acrylic inks
Powertex transparent
Powertex Stone Art
KatySue Seahorse Mould
Powertex Paperdecoration
Powertex Sand and Balls Sample pack

-pipettes/waterproof cupcake cases/glass mat/small paintbrush/plastic covering for table/gloves/water spray bottle

Mini project 1 – Making the Jellyfish

Pour approximately 5mm of transparent Powertex into a cupcake case and leave to dry (this can take 2-3 days to dry completely).

When dry remove and cut in half using scissors to give you 2 half moon shapes. Take some of the white paperdecoration and pull it into fine strips. Dip one end into some transparent Powertex and stick it to the underside of the half moon. Leaving the tails of the paperdecoration uncovered gives them a soft floaty look. Leave to dry

You can move on to some of the other mini projects at this time.

Mini project 2 – Making the Seahorses.

Make a small quantity of stone art clay (see the video here for instructions) place in moulds pressing down firmly, release and set aside to dry.

Once dry, use a nail file to remove any uneven edges and paint with the translucent inks. You may need to do several layers to get a bright colour and don’t be afraid to mix the inks to make new colours.

Mini project 3 – Colouring the fabric/paperdecoration and stones

See the video below for how to colour your fabric. If you want all of your hoops to have the same background. You need to layout the hoops on the dry fabric first allowing enough space between them, to be able to cut out with a wide margin. You will need this to pull them taut on the frame later.

Alternatively let each person work on their own fabric with colours of their choice.

How to colour fabric with Powertex Acrylic Inks

To colour the paperdecoration, take a strip and spray with water. Then fold it up and dip it into the inks. If you want the colour to run spray with more water after you have dipped it. You can take out some of the inks and place them on your glass mat to allow the colours to run together and roll the paper dec in this if you prefer.

Whilst you have the inks out, place some of the balls into a cupcake cases, mix in a small amount of ink to colour the balls and tip onto a piece of plastic to dry.

Now leave all of the ink covered pieces to dry completely.

Mini Project 4 – Attaching the fabric to the frame.

When your fabric is dry, dip it into the transparent Powertex. Then work this well to ensure you have covered all areas. The Powertex will look white but dries clear.

Now lay this fabric over the solid part of the embroidery frame, place the split hoop on top and slightly tighten the screw. Work around the frame pulling the fabric taut then tighten the screen further. Next leave this to dry then paint hoop with ink to blend in with your colour scheme.

PUTTING IT ALL TOGETHER.

Using the dried paperdecoration which you previously coloured. You need to dip this into transparent Powertex and wrap it around the edges of the hoops. Ensuring that where the hoops meet you reinforce this area with more paperdecoration. Let this dry then turn over and reinforce all joins from back.

If each person is decorating their own hoop, you can leave this step to last and join them once decorated.

Powerex family project, sea theme

I opted to work on the back of the hoop, the side with a recess so that the embellishments sat inside. I added my seahorses, jellyfish and stones using transparent Powertex to attach them.

I then added additional ink covered paperdecoration to cover the rings and drape over the hoops on both the front and the back.

If you are going to hang your piece, make sure that you use some paperdecoration to create a secure loop on your project.


Powertex family project, sea theme

I hope you enjoy making this Powertex family project and we would love to see your creations. Please feel free to post them in our facebook group – The Powertex Studio.

If you would like to take a workshop with me then details of these can be found on my website page – Annnette Smyth Art and Craft Workshops.

Did you catch my last article. Click here to be inspired.

For a tutor in your local area, take a look at the Powertex Tutor Directory

Until next time , happy creative adventures…………..Axx