A kelp forest – under the sea

Kelp Forest by Fiona Potter

It was a beautiful, clear blue sky morning in the glorious heat of Summer 2018 we arrived at Porthgwarra Beach in far west Cornwall just as the tide was receding.  It’s such a beautiful cove and we kept spotting something in the water around the rocks and went to investigate.  It was a whole area of kelp – a Kelp Forest! Wandering through the pools left by the tide there were beautiful shells, stones and shiny pebbles.  This was my inspiration for this Under the Sea piece.

Kelp Forest by Fiona Potter
Under the sea: Kelp Forest

Supplies

How to make a Powertex kelp forest

Step 1: The ingredients
Step 2 - Setting in the wires

Step 1: Use either Stone Art or other air dry clay to push into moulds, leave to dry. Cut 9 or 10 lengths of wire and randomly drill holes into the mdf base.

Tip: I had a tennis ball size piece of Stone Art clay left over from a previous project that I kept. Spray water lightly over a piece of clingfilm which I wrapped tightly around the clay. I sealed it in a reusable plastic bag.

Step 2: Push wires into holes, secure with masking tape then rip lengths of masking tape sticking it the full length of both sides of the wire to create lengths of kelp.

The base

Step 3: Building the composition

Decorate the base

Step 3: Build a thick random layer of Easy Structure on the base, push shells, moulded sea shapes etc into the easy structure. Spray with bisters, set aside to dry.

Tip: If you use a large central shell like I did, it is worth masking off with some cling film or paper before you spray with bister

Step 4: Washing back and adding a top layer

The kelp

Step 4: Wash back the bister from shells and shapes. Use red ochre to colour some of the coral like shapes. Add a generous layer of transparent Powertex fabric harder on the base and drop in mixed art stones.

Step5: Adding the Kelp

Metallic colours

Step 6: Bringing out the colour

Step 5: Rip up lengths of pale green tissue paper and paste onto the kelp using transparent Powertex. Leave to dry. Transparent Powertex helps to keep the transparency.

Tips: Paint the transparent Powertex onto the masking tape and press the tissue onto it with a Powertex soaked brush.

Step 6: Using the blues and greens metallic pigments bring out the highlights of the bottom of the sea.  Brush Mojito Lime and Golden Olive, Limoncello Gold randomly on the kelp. If you leave lighter patches the sun will shine through enhancing the kelp.

Leave it in a place where you get the sun. Watch it at various times of the day to see where the sun lands and where you might want to add further metallics and maybe a pearl or crystal.

I hope this easy but interesting focal piece inspires you to create your own under the sea project. You might also like this lovely fish sculpture project by Annette.

Don’t forget to share your makes in The Powertex Studio and if you can give me a shout out that would be awesome.

That’s me for now, check back in June when I’m upcycling one of my early Angels that has been keeping watch in my garden for the last couple of years.

Bye for now

Fi

Powertex Kelp Forest by Fiona Potter
Powertex Kelp Forest by Fiona Potter

Powertex DIY Lamp

Powertex DIY Lamp by Kore Sage

Designer: Kore Sage

Make a Powertex DIY lamp for lovely gifts or home decor and with Powertex you can make your own. Powertex fabric sculpture and fairy lights are an easy way to craft a lamp. I’m using battery powered LED fairy lights. Be sure to use LED lights for you project as these keep cool. Do not use a flame candle in this lamp.

I’m Kore and I want to show you how I made my own Powertex lamp using a bottle for a “mould”, simple Powertex techniques and a pack of battery LED fairy lights. Choose your own favourite embellishments to create the lamp in your own style. I’m using white fairy lights but coloured lights would be lovely too.

Powertex Lamp with LED fairy lights
Powertex DIY Lamp

Materials list

Powertex Universal Medium in Ivory

Ready Made Bister Spray in Blue

Colortricx pigment in Rich Gold

Easy Varnish

A large bottle or container for a mould

A plastic bag

Masking tape

Cotton fabric strips about 2″ – 3″ wide and a square for the bottom

MDF Dropouts

MDF Alphabet

3d Balls

Battery powered LED fairy lights

Prepare a mould

Wrap your bottle with plastic and secure with small pieces of tape. Don’t wrap too tight and ensure there are no holes.

Wrap the bottle in plastic
Step one

Wrap the bottle

Using fabric with Powertex, cover the bottom of the bottle first and apply strips in spirals upwards. Leave gaps in the wrapping for the light.

Use Powertex with fabric to wrap the bottle
Step two
Leave to dry for a few hours before removing the bottle

Decorate with embellishments

I used Powertex Ivory to add some 3d balls, mdf drop outs and letters. The structure is sturdy but avoid heavy embellishments at the top.

Add embellishments
Step three

Colour with Bister spray

Spray generously with Ready Made Bister Spray. Don’t forget the underneath, I left the inside Ivory.

Spray generously with Blue Bister
Step four

Create highlights

I used a damp cloth to wipe back some of the Bister from the raised textures.

Wipe away Bister form textures with a damp cloth
Step five

Add some shine

Metallics add a little extra shine on a lamp. I mixed Rich Gold powder pigment with Easy Varnish and dry brushed some textures.

Dry brush with Rick Gold pigment
Step six
Powertex DIY Lamp Insert LED lights for a lovely glow
Insert the LED lights for a lovely glow

I hope you have a go at making a lamp. Do share your creations with us in the Facebook group at Powertex Addicts United. If you’ve enjoyed this idea you might also want to take a look at Donna’s bottle light project too.

You can find more of my art and Powertex at Kore Sage Art but until next time, I hope you find some time to let your art out.

Powertex Ammonite Light

Powertex Ammonite Light

Designer:  Jill Cullum

My Inspiration for an under the sea light

This article is very much influenced by my love of the beach. I spent several years with the beach on my doorstep, where I regularly enjoyed early morning walks. And was the inspiration for my Powertex Ammonite Light.

I particularly loved the changing moods of the sea, the smells and a chance to blow away the cobwebs.  I’ve chosen fabrics and materials which resemble netting and rocks. Paper deco works very well here.

I have also used some shells which I have added extra colour to. You can always leave these natural though.  The Powertex stand gave the finished piece some weight, as well as structure and height.

TOP TIP – Have a hair-dryer ready when adding the Ammonites. You will need them to stay in place so that they have space to poke the lights through. This also gives more 3 dimension to your piece.

Materials Used

I chose my materials, cardboard, and embellishments from my stash which included sea shells. I have used sand and 3d ball to create a thick texture for my ammonites, giving them an authentic look.

Building the basic form for the Powertex Ammonite Light

Step 1

Using the stand a base add tin foil to create rocks and shape, covering with masking tape.

Adding detail

Powertex Ammonite Light
Step 2

Step 2 – Added more texture using some honeycomb effect cardboard packaging. Hold in place with masking tape. Cover with fabric hardener. Creating texture for the ammonites.

Creating texture for the ammonites

Step 3

Mix black fabric hardener with sand and small 3d balls. Use this to cover the mdf ammonites. Put to one side until dry.

Bringing the ammonites to life

Powertex Ammonite Light
Step 4




Step 4 – Once dry use Secret Art Loft pigments to colour the ammonites, using the dry-brushing technique.. 

Building more structure

Step 5

Add height and detail using material dipped in green fabric hardener. Blend it over the ‘rocks’ adding height to your form.

Putting the elements together

Powertex Ammonite Light
Step 6

Before the fabric dries, add your ammonites (see top tip above). Add paper deco placed over the ammonites, using blue fabric hardener, for extra detail.

Powertex Ammonite Light

Finishing Touches

I decided to add colour to the sea-shells using Secret Art Loft acrylic paints, before dry-brushing to bring out the texture. Finally I added the fairy lights.

Why not take a look at my last article here, on how to create pastel shades with fabric hardener.

We love to see what you make, so please share your creativity here, at The Powertex Studio.

I hope you have enjoyed this article and that it inspires you to create your own nightlight. A garden theme using wings and flower embellishments would work well too. Looking forward to seeing your own take on how to use fairy lights, bye for now, Jill x


Certified Powertex Workshop

What’s in a Powertex Workshop?

Have you thought about going to a Powertex workshop but haven’t yet, because you’re not sure what to expect? Well come with me and let me give you an insight in what’s in a Powertex workshop.

Powertex workshop

3d Flex Texture Powertex Workshop Samples

I was invited to a Powertex workshop earlier this month by Jill Cullum, of Purple Meadow Arts & Crafts. She is the Certified Powertex Tutor for the area where I live. Jill has been on all her training, so this means that she is qualified to teach and use all the Powertex products in her Powertex workshop.

Jill explaining the samples and what she did.

Where to begin in a Powertex Workshop

Everyone getting stuck in covering their canvas’s. Janet, top left wanted to do the technique but on journal covers, so Jill brought along a journal for her to work on instead. So if you know what you would like to do, contact your tutor before hand. They are very flexible and happy to oblige where possible.

Jill demo’d the next couple of steps and then went round checking everyone was okay and understood what they were doing.

Close up of Janet’s journal covers.

Whilst the canvas’s were in the drying box Jill demonstrated how to mix up the 3d flex. She showed what the right consistency with the 3d flex was to aim for. 

Then showed how to apply the paste onto the canvas.

Then it was their turn, with guidance from Jill.

Getting ready for the next stage

Whilst the makes were back in the drying box, we all sat down and had a natter with a cuppa and some chockie biscuits. I took this opportunity to ask them what they thought of the workshop so far.

One said that it was so different to what they normally do and it was good to come without any expectations.

Another said that they have learnt so many new techniques already and we haven’t finished yet.

Another said that is was nice to do something different.

After the coffee break, all the pieces came out of the drier. Look at those amazing cracks on Anita’s canvas.

Now the fun begins, adding the colour. The hardest part seemed to be choosing which colours to use from this huge selection. Everyone was encouraged to move out of their comfort zone.

Jill chose purple and green, these aren’t her normal ‘go to’ colours.

Jill demoing on her canvas, how to use the wax with the pigments and acrylics and how to built up the layers and blend the colours.

Everyone well under way with their colours.

Really coming along now.

Fabulous blending.

Anita was building up layers to replicate the colours she had in a photo on her phone.

Finishing touches

Once everyone was happy with their canvas’s, the last thing to do was to touch up the sides to make them black again. The black just seems to make the colours pop.

And here are the proud owners with their finished pieces.

This Powertex workshop took around two and a half hours from start to finish. Just look what you could do with the right guidance. All these ladies really enjoyed themselves today.

How many of you have a bottle of Powertex sat on your craft desk but haven’t opened it yet. A workshop is a great way to get started. 

Find your local tutor

There are over 100 Certified Tutors dotted all around the UK. To find the one nearest to you, click on this link which will take you to the Powertex Tutors directory. Login and find your nearest tutor who will be happy to help you with a workshop. They cater for everyone, groups, one on one, two on one, a group of friends or join a scheduled workshop and meet like minded people, the possibilities are endless.

I hope this has given you an insight into how a workshop runs. I hope that it’s nowhere near as scary as what you thought it might be, just go along. You will be made to feel very welcome and you’ll love it so much, you’ll want to go back. Most of the tutors have their own FaceBook pages and list their planned workshops under events. So if you see something you fancy, get it touch. Nothing is out of reach with the right guidance.

Would you like to become a Powertex tutor? Be inspired by an article from Jan a Powertex UK certified tutor and find out how here.

Pastel Powertex Flowers

Pastel Powertex flowers

Powertex Flowers – Pastel Shades

Designer – Jill Cullum

Spring is on the way!

I love Spring – the promise of lighter nights and the garden coming to life with colour. I also love a pretty vase of flowers on my dining table. With this in mind I decided to use Powertex in a different way for my latest article. By creating some pastel Powertex flowers.

Did you know that by mixing Ivory Powertex with other colours, you can create some very pretty pastel shades?  This article shows you how to create a vase of pastel flowers, bringing a touch of Spring into your home, all year round.

Materials list:

Pastel Powertex flowers

Raid your stash

From my stash I found a variety of embellishments, wooden beads, bottle tops and small egg shaped beads to use for the centres. I added small 3D Balls to give the centre of the flowers some interest. Adding delicate lace for the main petals and garden cane for the stalks. I also used some pipe cleaners for the stalks which worked well. Not weatherproof but hardened enough to hold up the flower head, giving great texture.


Designer Tip – Pour your Ivory Powertex out first, then add very small amounts of coloured Powertex. You only need a little colour to create a pastel shade. You can always add more if needed.

Bring your pastel Powertex flowers to life

Working on smaller pieces is sometimes more fiddly. With this in mind it is a good idea to have the hairdryer at hand.   A piece of polystyrene is also useful, so that you can stand your stems in to dry rather than laying them down – helping to keep the shape.

I have mixed Ivory with blue, red and yellow fabric hardener to create the pastel shades. For the stems I mixed Ivory with Green Powertex, one of my favourite colours I mixed for this article. 

To finish the flowers I brought out the texture with dry-brushing in a lighter shade of the same pastel flower colour, adding a further layer of white pigment.

Pastel Powertex flowers

I hope this has inspired you to grow your own Powertex flowers. Please share them with us in The Powertex Studio.

Please be inspired by more of my work in my last article. Find it here. If you like what you see press the star or leave a message in the comment box below.

Well for now I am going to wait for Spring and plan my next article. In the meantime you can find me at Purple Meadow Arts & Crafts. Bye for now. Jill x

Powertex Flower Girl

Powertex Flower Girl Figurine Garden Sculpture with Powertex (by Anne)

This is my first attempt at a Powertex flower girl figurine. She took me a long time to finally get finished, having started her over a year ago at my Level 1 Powertex Tutor Training! Now that she is finally done I love my Flower Girl – and I call her ‘Bestower of Beauty’.

Powertex flower girl

She stands approx. 49cm high.

Materials used:

How it was done:

The body was shaped over the wooden pole using the card inner tube stuffed and wrapped with foil and covered with masking tape. The plaster head was taped onto the top.

T shirt yarn was then wound tightly around the torso and down to the base of the pole. I made a bit of a decorative wrap over the torso to create the dress bodice. The whole thing was then given a coat of Bronze Powertex, working it well into the fabric.

Powertex flower girl

Fabrics were then coated with Powertex and draped over the body to create the clothing. I used a knitted fabric (Stockinette) to create the illusion of arms by allowing the knit to curl around on itself to give dimension.

A small amount of Power Cotton was added to make small hair plaits draped over her shoulder, and fine lace added to make a headdress. Another piece of T shirt yarn was used to create a tie belt and helped to hold the skirt securely in place. The crochet skirt was draped down and over the base.

During the training course I started the dry brushing technique, mixing pigments into Easy Varnish, to add some colour and bring out the different textures. I used Bronze Colortricx to colour the face, shoulders and hair, plus to add colour around the base. Blue and green Powercolors were used (mixed with a little white) to dry brush and highlight clothing texture.

I was delighted with what I had achieved but came home with my figurine always intending to add more colour (you know how I LOVE colour) and floral embellishments to turn her into a gorgeous flower girl. Sadly she sat in the corner for around a year before I finally pulled her back onto my work bench!

Powertex flower girl

I began by adding much more colour, intense in places, to colour her clothing using the new colours from The Secret Art Loft. I tried to keep most of this colour to the top layers of texture so as to keep depth in the fabric folds. I also added more colour to her face and lips, plus a little shading over the eye lids.

Powertex flower girl

Flower and leaf embellishments were created using Art Stone mixed with Powertex to make a clay which was pressed into silicone moulds. When dry they were coloured with Secret Art Loft Pigments mixed with Easy Varnish and glued in place with Powertex. I also created a suggestion of arms and hands using Stone Art clay. The bad modelling was disguised by carefully placing the bouquet of flowers in her arms – ha ha.

Powertex flower girl

The flowers were also applied onto her dress and down around the base. More texture was added to the base by sprinkling 3D Sand & Balls into wet Powertex.

Powertex flower girl

I spiralled the flowers down and around the hem of her skirt.

Powertex flower girl

Here you can see lots of textures in her outfit, and pretty coloured flowers in her hair.

AW Flower Lady 9

Another view showing her back.

AW Flower Lady 10

She looks beautiful standing in the garden. Although she is weather proof I would definitely have to add extra weight (e.g. a concrete base) or add a small garden spike to the base, as she is very vulnerable to toppling over in the wind. I am going to be keeping her indoors so she will be ok as she is.

AW Unicorn and Lady 2

However, she does look gorgeous alongside my unicorn! I might change my mind and adapt the base for outdoors – sure that I have a bit of broken paving slab somewhere – that would do the trick.

I hope that you like my Powertex flower girl figurine ‘Bestower of Beauty’. You can view my last blog here

 Bye for now, Anne x.

Powertex family project

A Tryptich with a Twist – by Annette Smyth

Powertex family project, sea theme

Hello,

This month I thought I would show you a Powertex family project. This is one that you could share with the children during the Easter holidays. So this article shows you how to make a piece of family art suitable for indoor use. It breaks down nicely into mini projects which all come together towards the end.

Why not let each family member decorate their own hoop, making this a real Powertex family project to treasure.

There is no limit to the number of hoops you can connect. Just ensure the whole structure is stable and check for balance when connecting them all together.

Powertex family project, sea theme

Here’s the twist, the hoops can be worked on either side (flat or recessed) and hung either way. So if your base fabric is fine you get a lovely silhouette if hung in a window with the decorated side facing outside. You could even suspend it and let it gently twist in the breeze getting the best of both worlds.

Or why not mix it up and have hoops facing in different directions?

Heres are the products that I used

– Set of 3 unvarnished wooden embroidery hoops
– muslin fabric
Powertex translucent acrylic inks
Powertex transparent
Powertex Stone Art
KatySue Seahorse Mould
Powertex Paperdecoration
Powertex Sand and Balls Sample pack

-pipettes/waterproof cupcake cases/glass mat/small paintbrush/plastic covering for table/gloves/water spray bottle

Mini project 1 – Making the Jellyfish

Pour approximately 5mm of transparent Powertex into a cupcake case and leave to dry (this can take 2-3 days to dry completely).

When dry remove and cut in half using scissors to give you 2 half moon shapes. Take some of the white paperdecoration and pull it into fine strips. Dip one end into some transparent Powertex and stick it to the underside of the half moon. Leaving the tails of the paperdecoration uncovered gives them a soft floaty look. Leave to dry

You can move on to some of the other mini projects at this time.

Mini project 2 – Making the Seahorses.

Make a small quantity of stone art clay (see the video here for instructions) place in moulds pressing down firmly, release and set aside to dry.

Once dry, use a nail file to remove any uneven edges and paint with the translucent inks. You may need to do several layers to get a bright colour and don’t be afraid to mix the inks to make new colours.

Mini project 3 – Colouring the fabric/paperdecoration and stones

See the video below for how to colour your fabric. If you want all of your hoops to have the same background. You need to layout the hoops on the dry fabric first allowing enough space between them, to be able to cut out with a wide margin. You will need this to pull them taut on the frame later.

Alternatively let each person work on their own fabric with colours of their choice.

How to colour fabric with Powertex Acrylic Inks

To colour the paperdecoration, take a strip and spray with water. Then fold it up and dip it into the inks. If you want the colour to run spray with more water after you have dipped it. You can take out some of the inks and place them on your glass mat to allow the colours to run together and roll the paper dec in this if you prefer.

Whilst you have the inks out, place some of the balls into a cupcake cases, mix in a small amount of ink to colour the balls and tip onto a piece of plastic to dry.

Now leave all of the ink covered pieces to dry completely.

Mini Project 4 – Attaching the fabric to the frame.

When your fabric is dry, dip it into the transparent Powertex. Then work this well to ensure you have covered all areas. The Powertex will look white but dries clear.

Now lay this fabric over the solid part of the embroidery frame, place the split hoop on top and slightly tighten the screw. Work around the frame pulling the fabric taut then tighten the screen further. Next leave this to dry then paint hoop with ink to blend in with your colour scheme.

PUTTING IT ALL TOGETHER.

Using the dried paperdecoration which you previously coloured. You need to dip this into transparent Powertex and wrap it around the edges of the hoops. Ensuring that where the hoops meet you reinforce this area with more paperdecoration. Let this dry then turn over and reinforce all joins from back.

If each person is decorating their own hoop, you can leave this step to last and join them once decorated.

Powerex family project, sea theme

I opted to work on the back of the hoop, the side with a recess so that the embellishments sat inside. I added my seahorses, jellyfish and stones using transparent Powertex to attach them.

I then added additional ink covered paperdecoration to cover the rings and drape over the hoops on both the front and the back.

If you are going to hang your piece, make sure that you use some paperdecoration to create a secure loop on your project.


Powertex family project, sea theme

I hope you enjoy making this Powertex family project and we would love to see your creations. Please feel free to post them in our facebook group – The Powertex Studio.

If you would like to take a workshop with me then details of these can be found on my website page – Annnette Smyth Art and Craft Workshops.

Did you catch my last article. Click here to be inspired.

For a tutor in your local area, take a look at the Powertex Tutor Directory

Until next time , happy creative adventures…………..Axx

Secret Art Box Love

True Love in a Secret Art Box- Shell North

February is the month of love so what better theme than ‘True Love’ could you have for this months Secret art box? So I decided to mix it up, take on a challenge and embrace my fears. So I am about to share with you some Secret Art Box Love.

In this article I show my first EVER video demo. But I have to admit I took on a more monumental task than anticipated. This is because it took far longer than expected (doesn’t it always when you learn something new). I was stalled by illness and it’s safe to say I came across more than a few technical challenges. This included loosing files so please bear with me!

When I say monumental task, there are 5 demo videos plus the box opening for you too get your teeth into. But you don’t have to watch all the videos at once. Perhaps come back again and view each video another time. Because this is a article on an online magazine you can view at anytime to suit you.

To start off I’ve decided to share opening my box. This is to show everyone a version of what theses delicious box full of goodies can contain.

The video didn’t turn the right way, so I’m off to a great start :D….However I have several video demos. And if you to bear with my first ever videos I’m sure you’ll still pick up lots of tips or cringe with me 🙂

True Love is free

My first Ever demo is called ‘True love is free’. It was my first inspiration upon opening all of the art box contents. I incorporated it with something I found in a charity shop. Unfortunately my memory card became faulty half way through filming. Because of this the parts where I made the leaves , roses, and where I rustied up the cage, cupid and the key are missing.

Heres a collage of the finished piece

Shell North, The Crafty Little Corner, True Love is Free, Secret Art box love.
True Love is Free

Love Notes

My second make with February’s Secret art box goodies was a journal. I named this piece “love notes’. So if journals are your thing this video demo could be right up your street.

Please excuse the fact that the begining of the video was lost due to a corrupt memory card so this is halfway through.

I used a variation of textured wall paper and stenciled images on the MDF hearts using Easy Structure. Next all items were coated and attached using Ivory Powertex fabric hardener. After drying with a hair dryer I then painted the whole journal in Secret art loft Raspberry acrylic Ink.

Here is the finished journal.

Shell North, The Crafty Little Corner, Love Notes, Secret Art Box Love
Love Notes.

Love Actually

Next on my agenda was the Pendant. I called this the ‘Love actually pendant’. Because after editing the video it became apparent that I use the word actually an awful lot (cringe!!!)

…and here is the finished piece

Shell North, The Crafty Little Corner, Love Actually, Secret Art Box Love
Love Actually.

Bee Mine

So I’ve been a busy bee as you can see, oh dear, I now have bees on my mind. My next creation was inspired by the other half heart and the sunflower mould that came in the box.

Once the heart was covered in sunflowers I wanted to incorporate bees for some reason?! I named this one unsuprisingly ‘Bee mine’. This took me further out of my comfort zone, can you guess why? But it may be your thing? Watch and find out!

Here’s my Bee-utiful finished ‘Bee mine’ canvas

Shell North, The Crafty Little Corner, Bee Mine,
Bee Mine

Reflections of love

To finish off the month of love, I came to be inspired for this creation by my partner. We were discussing how busy\stressed I’ve been when I should of been resting. How maybe I need to ‘reflect’ on my needs by not taking on too much. Or taking what could have been a small task and making it a monumental one….now distracted from the said conversation by one word…..Reflect…….yes….my mind pinged with my last creation. Watch now to find out.

Here’s the finished treasure.

Shell North, The Crafty Little Corner, reflections of love, secret art box love
Reflections of Love

Well thats it from me, what a journey this article has been. Despite my reservations I’m glad I faced my fear of videoing and working out of my comfort zone. I hope I’ve inspired you to create something unique. To do something out of your comfort zone with crafting or perhaps inspired you further to order next month’s Secret art box.

If you have any questions from products to techniques. Or you would like to make something similar to the projects in this article. Please don’t hesitate to send me a message at The Crafty Little Corner.

That all from me, List of items with links used right at the end.

Don’t forget to leave a comment.

Peace, love and video blog shenanigans

Shell 🙂

Red Powertex fabric hardenerlead grey Powertex fabric hardenertransparent Powertex fabric hardenerIvory Powertex fabric hardeneryellow ochre Powertex fabric hardenerpolystyrene heartembellishmentsMDF keyAngel cast embellishmentrose mouldsrust powderred ochre powercolor pigmentEasy coat varnishstone art3D flex, MDF hearts, MDF heart flowersMDF journalMDF name plate, Raspberry acrylic ink, white powercolor powder pigmentlipstick fizz SAL powder pigmentTerra-violet colourtrix powder pigmentparty pearls pigment pigment trayviolet valentine SAL pigmentSilver colortrix powder pigmentsunflower moulddaisy mouldspansy mouldsegg yolk acrylic inkpalm leaf acrylic inkvictorian papersEasy coat mattpink flamingo SAL powder pigmentterra-green colortrix powder pigmentbronze gold colortrix powder pigment,  heart rice paper.Edit”True love in a Secret Art Box-Shell North”

The Secret Art Box – February

The Secret Art box, Powertex, love projects

This months article brings you inspiration and projects to create using February’s The Secret Art Box. The new craft subscription box from Powertex UK.

“The love of my life opened my heart the warmth it let loose poured into my art” by Claire Ivins

*** You may not get an exact replica of this box, but similar items will be included ***

Powertex Secret Art Box Project One

I also gathered a few more supplies, wire, paper tape, tinfoil and a larger mdf heart shape.

I used the mdf heart shape to mould another from wire.

I used tinfoil to pad it out and create the shape I wanted.

Next came the making of the arrow. This is a thicker wire as I wanted it strong and sturdy.

I covered everything in masking tape.

Then I started to play around with some of the contents in the box.

I wanted to make a recess in the polystyrene heart for the plaster heart to sit in, so I drew round it.

And using a craft knife and a small pair of scissors, I dug out the shape.

I placed the plaster heart in the hole to try it for size.

 I painted it with a coat of red Powertex. Whilst still wet I pressed Stone Art powder onto it and rubbed it in, letting the excess fall off. The Stone Art creates a stone like effect.

Then I sprayed it with red Bister. This red is more of a mahogany colour, ie a deep red.

The Secret Art box powertex

I painted the heart and arrow shapes with the red Powertex and stuck the arrow on with it too. I cut out some of the polystyrene heart so it sat on the frame. I added the gold sequins from the January box. And also used rich gold pigment from my stash over some of the heart shaped frame.

And to finish I mounted it on one of the Powertex metal stands.

      

Some more close ups.

Powertex Project Two

I did the same for my next project and started off by creating a layout. This time I wanted to show different shades of red and different textures.

I sprayed the plaster cherub with the red Bister.

I used the red ochre and varnish to create a paste and painted the wings, and did the same with the rich gold on the hair.

I painted the large heart from my stash, and from the Secret Art box, the set of four hearts (including the one out of the middle of the biggest one), the smaller starburst shape, mini hearts and the wooden love word, all in the red Powertex.

This one I added strands of Power Cotton to the wet Powertex, painted over it and added the key whilst still wet. Once dried, I dry brushed with green olive pigment, which if you were lucky enough, was in the January subs box.

This one I sprinkled some of the small Powertex sand balls into the wet Powertex and dry brushed with rich gold pigment.

And for this one I added pieces of tissue to create some texture and to dry brush I mixed some of the blueberry pie with the red velvet acrylic paint and a touch of lipstick fizz pigment (for the shimmer) to create a deep purply colour.

The Secret Art box Powertex

Next I layered everything up and put it all together. I used the Powertex as a glue once I was happy with the placement.

           

Some more close ups.

For my next project I wanted to section off parts of the sheet of rice paper included in the box.

Instead of cutting it, I like to get a rough edge as I find it blends in better and isn’t such a harsh line. If you take a wet paintbrush and mark out where you want to tear, if it’s wet enough it should just pull apart. If it rips then the paper isn’t wet enough.

It should just pull apart and creates a lovely edge.

This is what I ended up with. Don’t you think they look much nicer than straight cut edges.

I also cut a piece to size and fitted it inside one of the metal embellishments I got in my box.

Then I completely filled it with transparent Powertex and left it for several days to dry. It is cloudy when a liquid, but dries clear.

I wanted to create a pink colour to combine with the images, so I mixed red and white Powertex until I achieved the colour I wanted.

I found a suitable glass bottle and completely painted it with my new hot pink colour and left it to totally dry before the next step.

Using transparent Powertex I glued on the pieces I’d torn out. I smoothed them out and also added a layer over the top. Now this looks really messy and you might think, oh no, what have I done. But, don’t panic, stick with it, the transparent goes on cloudy, but dries brilliantly clear. I also added some of the fancy yarn I had left from my Bluebird (January) box around the top.

And this is what I ended up with once it was all dry.

The Secret Art box Powertex

I added some chain and a couple of metal charms, the hand and heart from the box. The transparent Powertex has now completely dried that I put in the heart shape, so it has now sealed the image.

And a decorated bottle makes a great candle holder. Should you wish to light the candle the dripping wax won’t be a problem when it meets the Powertex. However, don’t let a naked flame come into contact with any fabric, as Powertex is not a flame retardant. As with all naked flames, do not leave it unattended, we won’t be held responsible for your house burning down!!

The Secret Art Box Powertex

All three makes together.

I hope that you have gained some inspiration for your own, The Secret Art box, Powertex craft subscription box. I can’t wait to see what you do with it. Don’t forget to share your makes on the Powertex Studio Facebook page as we love to see what you’ve been up to.

Did you catch my article last month find it here. Thanks for stopping by Sam

A Powertex Love Story

A Powertex Love Story – February The Month of Love – Like The Pieces of a Jigsaw

It’s that time of year when thoughts of love fill the air and we think of that certain someone special. So here I am to share a Powertex love story with you. Now I don’t know about you but I love flowers. Unfortunately this is the time prices in the shops rise. Those beautiful flowers you have paid so much for, are short-lived and their beauty fades all too quickly.

Use Powertex to upcycle

I am also a bit excited by recycling. I had a lovely basket of flowers for Christmas. When they were over I decided to put that basket to good use. How about giving someone special in your life flowers that are going to last much longer than a few days

Prepare your materials

I stared by gathering up my Materials. Choosing traditional colours for my project red, green and gold. I knew these would look perfect against the bold black of the basket.

Valentine Basket Like the Pieces Of a Jigzaw

I used: Red Powertex, Black Powertex, Green Powertex, Limoncello Gold Pigment, garden wire, masking tape and an assortment of MDF pieces. The MDF pieces can be anything you want. I chose hearts and jigsaw pieces. These represent love and two people fitting together like a jigsaw to create a beautiful life.

Valentine Basket Like the Pieces Of a Jigzaw 2

Where to start your Powertex love story project

I first painted the basket using Black universal medium. Then created my Roses by cutting up pieces of T-Shirt cotton in a rough petal shape. You don’t need to be to fussy about this. I cut a length of garden wire, wrapped a small piece of masking tape around it to help the petals grip. Then started adding the fabric that I had massaged in the red Powertex,  until I was happy with the shape. I used the same technique with the cuts offs from the petals and green Powertex to make a foliage shaped stem. I gave my MDF pieces a coat of red or green with added texture of Medium 3D Balls, before leaving it all to dry off over night.

When it was all nicely hardened off I dry brushed the edges of my Roses and MDF pieces. Using Limoncello Gold pigment to add that touch of class. Then the exciting part, arranging it all in my basket. Now wouldn’t you just love to receive this knowing it was going to last a lot longer than a few days

A Powertex love story

Ladies & Gents I give you ‘Like The Pieces Of a Jigsaw’ The everlasting Basket of flowers For the special person in your life.


A Powertex love story

You can find me as Alex Henry Mixed Media on Facebook. There you will see others styles I work in.

Enjoy your Powertex days, the perfect way to chill out and create something beautiful. Don’t forget to share your makes with us over in the Powertex Studio on Facebook. And leave any questions or comments below the article. Find more Powertex articles by Design Team and guests here.

See you again soon.

Patricia