Powertex Medium Art Doll

mixed media powertex medium art doll tutorial

Powertex Medium Art doll – Goddess of Mystery – by Abigail Lagden

Hello and welcome to my latest project! For this one I have used the Powertex medium Art Doll kit with the contents shown below.

Kit contents

I love working with the project kits from Powertex UK. They provide the perfect level of structure to work with and stimulate ideas. But also have the flexibility to put your own style into them. By how you construct them, which other products and embellishments you use and finally how you add colour to them.

As usual, I started by playing with the MDF kit pieces and arranging them in different ways. The picture below shows my initial guide design. As you can see it evolved and changed a fair bit as the project progressed. This always happens to some degree with my creations. So don’t worry that you have to stick rigidly to your first design. It helps to have an idea of where you are going at the start. I find the best results happen when you just go with the creative flow once you start building your piece.

Original design

As well as the Medium MDF Art Doll Kit, I used the following for this project:

First I used Easy Structure through the ‘arty quotes’ stencil to add the words ‘mystery’ and ‘wonder’ to the wings. The thing I love about this stencil is that not only do you have the lovely quotes in their entirety. But you can also just use specific words or phrases from within the quotes. To keep the stencilling clean for single words, I use masking tape to cover the words. Placing around the ones that I want to use before using Easy Structure paste through it.

Stencil masking

I wanted there to be lots of texture in this project. I mixed three different pastes using yellow Powertex with Easy 3D Flex, 3D sand/small balls and Stone Art.

Three pastes

First, I covered the base of the shadow box with the Easy 3D Flex paste. Before using yellow Powertex to attach and paint the sides of the box. I applied the sand and balls paste to the ‘crown’ pieces and pushed them into the 3D flex paste. Then I painted the plaster face with yellow Powertex. Pushed it into the 3D flex paste and sprinkled a few small balls into the box.

Box frame

Next, I worked on the back piece of MDF. Randomly adding areas of the three different pastes I mixed earlier. Creating lots of textures and submerging the MDF row of hooks at the bottom. Then I sprinkled some medium 3D balls onto a few areas followed by some small balls to fill the gaps. Whilst the background piece was still wet, I attached the box frame and the other MDF shape into the pastes.

I smeared a little left over 3D Flex paste onto the princess’ face and onto parts of the crown piece.

Pre-bister

The top piece of the shadow box was painted just with yellow Powertex. The wings were covered with the sand and balls paste.

Wings 1

All of the pieces were then left to dry and/or crack before they were sprayed with brown bister.

Bistered piece

Bistered bits

This was dried and then the bister cleaned back using a damp sponge. Leaving the stronger colour in the depressions, giving more depth to the textures and lightening the uppermost parts.

Cleaned back bister

Cleaned back bister wings

Now for the fun part… adding a little bit of extra colour to bring the piece to life. I wanted this piece to have quite an earthy, rustic, natural quality. I used different blends of light blue, moss green, yellow ochre, lilac and white powercolor pigments. Mixed with easy varnish and applied using a dry brush technique.

Close up 2

Close up 1

The final step was to secure the wings to the front of the frame with powertex. Then the front of the frame to the main piece. I also hung a little metal key charm through the hole at the bottom of the frame.

Close up 3

Powertex Princess Art Doll - Abigail Lagden

I hope you’ve enjoyed seeing how I made this piece. Please do share your own creations on the Powertex Studio facebook page. Where you will find lots of inspiration as well as support from our fabulous Powertexing community.

You can also see more of my work on my Curiously Contrary facebook page and on my website. If you didn’t catch my blog last month take a look here.

Until next time, Abs xx

Stone Art Clay Powertex Birds

Mixed media Blue Powertex bird Stone Art clay sculptures

Stone Art Clay Birds of Powertex Paradise by Shell North

In December my first Design team blog goodie box arrived! I was so excited!!! I was given the theme of a pair of birds and these are some of the items I received to create something with stone art clay to hopefully inspire others. (eggs, molds and dies are my own)

I did some research for birds in the style of these new MDF bases. I’m usually quite inspired by nature but nothing I found tickled my imagination. So decided to create something whimsical and a little different. Something from my imagination that may represent a bird of paradise. Because sometimes we need thoughts of warmer places of tropical paradise in these colder month in the UK….

thumbnail_20190121_221319

Powertex uk’s favourite product of the month is Stone Art, I decided I was going to use stone art as a clay to cover this piece. I also pulled out my bottle of Blue Powertex liquid art medium. Although I love this colour, I just don’t use it enough! Mixing equal parts of Blue Powertex to stone art powder until I couldn’t stir it anymore. I kneaded it like dough until the stone art granules could not be seen. This was wrapped in cling film and left for a few hours while I prepped everything else.

thumbnail_20190120_191901

First step was to create the bird shape was cut two polystyrene eggs in half long ways and attach them to the breast areas of the MDF bases with masking tape. Molding the 3D shape of the birds with foil and covering in masking tape. Keeping the holes in the MDF bases open for the wire wings by piercing through the eggs with wooden skewers.  Then threading some wire through the bottom holes, I created a wing shape. Inserting the ends of the wires back in through the top holes on both birds, covering in foil and masking tape again. I built up the rest of the birds bodies as before with foil and masking tape.

Now the birds were fully covered in tape I pushed them onto the 2 pin metal base and molded legs for the birds with foil and tape as before to secure them.

The clay I had made earlier was now ready to use, so I warmed it slightly by kneading. I took clumps and rolled it out into sheets about 5mm thick. Wet the underneath with a little water and smoothed onto the birds piece by piece. To blend the areas as one, I again used a little water my finger tips and a small pallet knife. I also made some feather molds from the clay and added to the tail area of the birds.

For the wings I used one of my favorite texture products…. paper decor, available in a variety of colours. Today I used pink because the blue Powertex is quite dark the colour of the paper decor won’t show through. I cut feather shapes out of it and worked blue Powertex liquid hardener into each piece before smoothing on both sides of the wings.

thumbnail_20190121_223100

Next I took Bronze (brown) stone art clay. Made with stone art and bronze brown Powertex art medium from a recent workshop. Rolled a long thin sausage shape and molded the beak shapes smoothing them into place. I covered the legs using stone art clay with my finger tips, a little water and small pallet knife.

thumbnail_20190121_101242

I created a small repetitive feather texture all over the birds body on the still wet clay. By pressing the silicone texture pad against areas I needed texture. I wanted to create webbed feet, using left over wire from the wings I shaped bird feet. And covered in masking tape before paining them black with black Powertex universal medium.

I decided to add wire crests to the birds to give extra interest. By pushing thin wire through the clay and curling them at the ends. I chose some green glass eyes and pushed them into the clay. I decided to be a little quirky with the colour of the legs, as I’m creating whimsical birds. So I painted the legs stripy using licorice twist and clotted cream acrylics.

thumbnail_20190121_175436

I left them to dry for a few hours so the clay would harden a little. So it was now time to bring them to life, by dry brushing with colours. For this I used Powertex powercolor and colortrix powder pigments mixed with easy coat varnish. I used orange and then faded yellow ochre in onto the beaks. I used ultramarine blue, then turquoise mixed with a little white. This makes the turquoise pop on the body and wings. Finishing by lightly dusting rich gold over the body and terra-green on the wings.

thumbnail_20190121_181126.jpg

Well the finished piece can be seen below…..Thanks for reading my first blog as part of the Powertex UK Design team. I hope you all enjoyed what I created this time. Do join me again next month when I’m back with another article.

thumbnail_20190121_210700

Don’t forget all the items used are hyperlinked. Click the highlighted text and it’ll take you straight to items you require, to save you time searching. Please don’t hesitate to comment or ask questions below.

In the mean time why not look through all the new and old blogs. Provided for you by the Powertex UK Design team and guests. You can also find me at The Crafty Little Corner. Send me a message if you would like to do this workshop with me. Or find me on my Facebook page sharing new ideas, hints, tips and a whole lot of Powertex inspiration.

Please spread the love and share this and other blogs.

Peace, love and Paradise ūüėČ

Shell x

The Secret Art Box

January The Secret Art Box Bluebird, Powertex uks craft subscription box, powertex box frame

The Secret Art Box – Powertex UK Subscription craft box – by Anna Emelia Howlett

Inspiration for The Secret Art box January Powertex projects

Which lucky crafters got their hands on Januarys The Secret Art box?( The Powertex UK craft subscription box). Me I did!! I squeed a little and did a little dance when I saw the contents. If you don’t want to miss out on further boxes sign up here. I promised myself I would make some quick projects for you this time. So you are able to scratch that creative itch when you haven’t got as much time to spare.


“We wish you bluebirds in the spring, to give your heart a song to sing”

The Secret Art Box

So my mind was racing with all sorts of ideas and I am going to share a few with you. You can get so much out of The Secret Art Box project wise. And here is the first I came up with.

Powertex mixed media box frame

Now I know what you are thinking hey that frame didn’t come in the kit. Whether you are an avid Powertex addict or you are just getting started. I’m sure you will have some sort of frame in your stash. If not use the layout and free hang it or create on a canvas. It really doesn’t matter what you do. There are no set rules with Powertex. But there is on thing you must have, that’s right FUN!!! This is supposed to be a time for letting go and relaxing. Setting some time aside for yourself to do what you love, crafting! And not having to do too much thinking!

To start your frame

I took a plain pine square box frame with the glass removed. I then sprayed it with mahogany and brown bister. The bister is a walnut stain spray that you can get from Powertex UK. So it will dye or stain the area you have used it on. It is a great addition to your stash. So if you haven’t got any definitely pop it on your wish list.

3.jpg

With some Ivory Powertex I mixed in a bit of the blue Powertex in the kit approx a teaspoon of each. Then dry brushed the frame all the way round leaving some of the stained wood peaking through. Next I mixed more blue and Ivory Powertex but a lighter shade and repeated the process. I also sanded back the frame a little because this helps some of the stained wood to show through. Then Taking the blueberry pie from the kit I dry brushed a little around the frame.

2.jpg

I took the blue paperdec (in the kit) and cut around the bird shape. I had some music paper in my stash that I wanted on the other bird. Using the music sheet paper was quiet apt due to the song bird type theme. I coated and stuck down the paper dec onto the mdf bird with the blue Powertex. With some Easy coat matt (another product I would recommend adding to your stash) I stuck the music paper onto the mdf shape.

Mixing bister granules and varnish together to make a brown stain to then apply and age the paper. You could spray it to give the same effect. Currently the bister comes in granules and spray form. So that you can make your own or have it premade in a spray bottle.

4.jpg

How to add the song sheet bird wing

I cut a shape out of music paper and glued on to the back of a cereal packet with Easy coat matt. To raise it off the bird I used the MDF mis-shapes they make great bumper pads. And will add depth instantly to projects.

5.jpg
6.jpg

For the backing board, I used some of the lace and scrim in the kit. To create texture I added some Easy structure. Liberally scrapped across the board with a palette knife and through the super cute stencil that comes with the kit. And then coated with the blue Powertex. Dry brushed with the blueberry pie acrylic and blue curacao pigment and varnish from the kit. (I didn’t prime it, just went straight on with Powertex, but you can if you wish).

Taking the branch I dabbed a little of the easy structure and 3d balls on the leaves. I coated the leaves with Blue Powertex and dry brushed with golden olive pigment from the kit. Sprayed the branch with brown and mahogony bister and varnished once dry. The bird house was sprayed with bister and dry brushed with Ivory Powertex. And the heart sing was created with items in my stash using the Powertex alphabet coated in blue Powertex and dry brushed in olive pigment.

7.jpg

I have to say I am really impressed with the new size bottle and the nozzle. It allows you to easily apply the Powertex. Also making it really easy to use a little at a time. (Powertex cures with the air, so you can’t put it back into the bottle once it’s poured out).

In the past I’ve had to pour out the Powertex onto my palette. But the nozzle controls the flow and I simply applied the Powertex straight onto pieces of my project leaving no waste. I used this handy bottle with nozzle like a glue to stick everything in place. The transparent in this handy sized bottle makes everything even easier to stick down. In case you have any seeping through the sides, as it dries clear.

The Secret Art Box - Box Frame - Powertex birds
Bird Sing Song
The Secret Art Box - Box Frame - Powertex birds

How to create Powertex mixed media bird

With the cute wooden free standing bird I wanted to create a really simple, quick but effective project.  I laid the bird shape on the textured paper, drew around it and cut it out. Then I stuck the paper down using the Blue Powertex.

Top Tip: Leave to dry and take a sanding block around the edges to take off any overhang.

The Secret Art Box - Freestanding bird - Powertex
Free Bird

Then coat the whole project with the Blue Powertex. It will act as a primer, glue and paint all in one. I chose some of the feather embellishments for the tail with a paper rose. The eye is a wooden embellishment with a diamond eye all stuck down with the Powertex nothing else. Just leave to dry. Then paint with blueberry pie acrylic. To finish I mixed a bit of the olive green pigment into the acrylic and dry brushed to finish. 

The Secret Art Box - Freestanding bird - Powertex

LOVE BIRD JOURNAL

The Secret Art Box - Blue journal love birds- Powertex
Love Bird Journal

How to create a Powertex Journal

I wouldn’t be me if I didn’t create a journal. I happen to have some mini books in my stash, waiting to be turned into journals. The left over textured paper was placed on the front and back cover at the bottom of the book. Material from my stash went at the top and the lace in the kit through the middle of the book. Some of the wavy yarn on the spine of the book.

The Plaster heart made a great feature/center piece. All coated and stuck with the Blue Powertex. Dry brushed with the blueberry pie, blue caracao and olive pearl pigment. After all these projects I had over half of my bottle of Powertex, acrylics and pigments. All left over for other projects! Awesome right?

Blue Powertex journal
Blue Powertex journal
Blue Powertex journal
The Secret Art Box - Blue journal love birds- Powertex

With all the little embellishments left over I just couldn’t leave them out. So decided to make some paperclip banners for the journal. I have created a video here as a walkthrough. I hope you have enjoyed seeing these ideas.

Do share your makes if you have been inspired in the Powertex Studio. You can find me at Rosehart Studio or subscribe to my You Tube channel and look out for more videos. Toddles Anna xXx

Christmas Powertex Creativeness – Jinny Holt

Well hello and seasons greetings to you all.

I do love Christmas and my Christmas mojo usually goes into overdrive at this time of year! So for my December blog, it would be rude NOT to do a Christmas tutorial and for this, I decided to do a Powertex Christmas tree. It is done with using a very few basic pieces of material and of course a bottle of Powertex. In this case, I used BRONZE POWERTEX

For this project, I used some cardboard, from which Powertex materials were delivered in,  Powertex, and an old pillowcase and some scraps of lace and sack cloth.

47579546_1170990973058346_7220253264854384640_n

I cut and shaped my cardboard into a cone shape and added masking tape to help secure it to its shape. I dipped my cut strips of pillowcase into my powertex and started wrapping the strips around the tree, the more strips you use the more texture you can create. I found some bits of lace and sackcloth and soaked these in Powertex and added them to my tree shape. I am a bit of a glue gun fanatic and decided to drizzle some hot glue down my tree shape.

Next for some colour, as I was doing this tree for a friend, she wanted a green tree, I used a mixture of colours and mediums, I started with some green acrylic and then added some Powertex pigment colours.48164589_2489309981083548_8377024022231121920_n

I have used some of the Art Lofts pearly pigment powders GOLDEN OLIVE and  to highlight and dry brush and of course, I used lots of gold LIMONCELLO GOLD!! I get kind of sidetracked when I add the colours and the pigments and it never ceases to amaze me, how your piece comes alive at this stage!

I left my tree overnight to dry off and then added some Christmas bits and pieces on it to complete the look of my tree.

So next time you think about throwing away that cardboard box, think again, what could it be? A bottle of powertex, a few bits and bobs and a pinch of imagination.

For all other ideas, tips and tricks with what you can do with Powertex try…

THE POWERTEX STUDIO

POWERTEX UK 

You can also find me on Facebook at Mums Shed

Thank you for reading this blog and I hope whatever you are doing over the Christmas season be safe and be happy and keep creating.

Until next month,

~Jinny~

Powertex Stone Art Hare

Powertex Stone Art Hare – Rustic Autumn Hare by Anna Emelia Howlett

Powertex stone art hare

Time to create with your Powertex

So here it is! The project I have had in my mind for some time and have been desperate to get on and do. And this one I have been looking at for a year now. Other things have just happened to crop up and this idea has been constantly shelved but that’s ok. I have finally got round to doing my Powertex Stone Art Hare.

I think it’s really easy to give ourselves a hard time when we haven’t turned all those ideas swimming in our heads into reality. It also turned out completely differently to what I had planned but that’s the beauty of Powertex.

Powertex stone art hare

TOP TIP: My first top tip if your creative mind wanders off piste as it so regularly does with me is don’t worry about all the projects you want to do. Get them onto a list and focus on the one you want to create right now. Remember to concentrate on the moment, and get lost in your creative bubble. Of course if you like, with Powertex you can work on a couple of projects at a time in different stages if your waiting for another one to dry, it would be rude not to!

Powertex, stone art, pigments, varnish and bottle opener21.jpg

What I used:

MDF Hare/rabbit, Red Powertex,¬† ¬†Yellow Powertex,¬† ¬†Stone Art,¬† ¬†Sunflower mould,¬† That’s Crafty¬† Stencil,¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬† ¬†The Secret Art Loft pigments,¬†Easy structure,¬† ¬†Bister .

0.jpg

TOP TIP: Nature makes a great colour palette. These leaves were on my walk to the post office. So I snapped a picture on my phone to remind myself of all the beautiful rich, rustic colours.

Step one: I marked out sections of the hare with another idea in mind completely. But that changed, so don’t worry to much if this is something that happens. I’d recommend using a coat of Powertex to cover the whole base of the mdf shape first. My impatient brain didn’t but it does show how well the mdf takes the Powertex without prep. The Powertex shapes are made of really high grade mdf! I used the Easy structure through the That’s Crafty flourish Stencil.

That's crafty flourish stencil

TOP TIP: The stencils are nice and thick which makes them easy to clean off as you can scrub them quite hard, if you forget to put them in water. Well, you know it happens. Make sure you pop them into some warm soapy water as soon as you have used them though to make cleaning, much easier!

Step two: Thenmake up some Stone art clay. I’ve put together a little slide show to help you with each step. After this you can push the clay into the sunflower mould to create an embellishment.

16.jpgPowertex hare step by stepStep three: I started randomly painting on the yellow and red Powertex mixing on the mdf base as I went. Then put some stone art powder straight on and rub in. Next with a palette knife, add more yellow and red Powertex, with another layer of Stone art.

Keep doing this until you have got the desired texture. Press the clay straight on in certain areas, using a dabb of Powertex which acts like glue to help it adhere to the base and stamp into it. Some of the stone art went into the clay but that’s ok because it added more texture. Add the sunflower using a dabb of Powertex to stick it in place.

Step Four: Start spraying with bister, this is a walnut stain which gives an extra depth of colour to your work. I used black, yellow, red and green bister. Normally I saturate with bister and leave to dry. But I used some kitchen roll to dabb off as I wanted to get the colour on as quickly as possible. Repeat this about 4 times to create a good layer of colour. You can add as many layers of colours as you wish, you will get more deth of colour the more you add.

Powertex hare and bister step by step15.jpgPowertex stone art hare step by step

Step Five: To finish dry brush with red ochre and yellow ochre powercolor. Then finished the piece with a touch of the secret art loft pearl pigments lipstick red and limoncello gold.

Powertex stone art harePowertex stone art hare12.jpg

TOP TIP: Creation of any type of art is all about learning and experimenting. Please use these step as guidelines to create your work of art. And remember if you wish to change the colours to suit your tastes you can do because there are no rules with Powertex.

Powertex stone art hare

I hope you now have the ideas and inspiration to go forward and create a hare or perhaps apply the technique to the other Powertex mdf shapes.

Remember with Powertex there is no right or wrong. Just technique. Which once you apply it your own style will shine through.

Please share your makes with us over in the Powertex Studio. We love to see your creations. Do ask any questions or post in the comments if you have found this project inspiring. Most of all have fun! Toodles Anna xXx Find me at Rosehart Studio. See my last article here.