I love Powertex!

i love powertex

Powertex, passionately in love ~ Jinny Holt~

What can I say, February is the month for love. I don’t do Valentines but I do love to create and I absolutely LOVE creating with Powertex! I’d even go so far to say I’m kinda obsessed with creating, especially with Powertex involved. It is also fair to say I find being creative a form of therapy. So for this blog, I am going to show you some of my favourite creations and give you a brief description of how I achieved them because I LOVE creating.

I have always been creative from a child and this has never left me, I am lucky enough to create in my full-time job as a Support worker as I am also  their creative coordinator, which means sometimes I get to create and try and pass on my passion of creating to the young adults I work with.

a4 art doll kit powertex
A4 Art Doll Kit

The above creation was made using the newest kit from POWERTEX UK and I loved doing this. I did not stick to my usual pallet which is normally quite dark, so this is a refreshing change for me.

How I created my Art Doll

I used some Easy 3D Flex to create a background with lace and some netting, I dripped Powertex Acrylic paints and pigments down the back panel and used some bister to spray. Then assembled the piece together and added the extra bits to the frame. Next I applied some Stone art to the wings, to give them depth and coloured with the Gold pigment. Then I used some easy 3D to create a paste to go over the wording stencil on the heart. Dry brushed the whole piece with tonal colours and gold. You may have seen this piece on Hochanda.

Powertex frying pan with flower detail

I really could talk about how much I love to Powertex all day, every day!!

This piece above was an old rusty frying pan that I was going to throw out until I had that “light bulb” moment and thought “Ooh I can Powerex it” so I did. I used some of the STOCKINETTE  and an old t-shirt and some crochet material with Bronze Powertex, added some embellishments as a focal point and dry brushed with gold, greens and blues. This piece now resides at my Daughters home as she fell in Love with it.

So another reason for me to LOVE Powertex, you can Powertex anything really, so recycling and upcycling all the way.

See you can use anything, pegs in this piece, to adorn a cheap birdhouse, I hope the photos are self-explanatory!

I think I shall leave this article here for now. I really Love working with Powertex! Did you catch my last article find it here. See you next time Jinny.

You can find all the necessary things at POWERTEXUK

You can find tons of inspiration at THE POWERTEX STUDIO

You can find me on MUMS SHED

A Powertex mixed media project – Heron canvas – Jinny Holt

Tranquillity at sunset

Good morning fellow creative people, my project for January was a pair of MDF birds and they look like Cranes which are very similar to Herons, well I think so, which is a bird I see on a more or less daily basis when I take our dog for a walk by the river, so my cranes have now become herons.

49701109_225105988413800_1671287734695624704_n

I have to confess in my head I was going to do freestanding birds, not dissimilar to a fellow Design team member, so I had to rethink how I was going to bring my birds to life. Then it hit me, why not do them on canvas! So this was my train of thought. I had an old powertex canvas and decided to recycle this as the backdrop for my birds.

49580984_2526828210677053_4624620385453735936_n

 In fact, I already quite liked this canvas as a backdrop and helped me to plan a backdrop for my birds. I then added some extra texture to this canvas, using TRANSPARENT POWERTEX  to help adhere my texture to the canvas.

49344787_280667132612727_2592093422621818880_n

I had a rummage through my stash and found these old split washers and nuts, which I overlayed over pieces of odd scraps of lace and PAPERDECORATION and a little bit of stone art paste which has added more texture to the canvas.

TOP TIP ~ when using paper decoration, spray with water before soaking in Powertex, it will react quicker and thus save creative time ~

49457160_271157443581458_353789311008636928_n

I have also added some little pegs to give the illusion of reeds.

49831323_398316947599499_3766798679231430656_n
I added extra texture on the sun part of the old canvas with stone art clay.
49467920_2204467493109513_5402195115991105536_n

I next painted the whole canvas with a thin layer of Ivory Powertex, just to give it a base for the new colour.

49864934_763425604056154_5110100845525991424_n

I then painted my canvas with pigment colours and the secret art loft paints.

TOP TIP ~ Did you know you can use your pigment colours like watercolours?

I would not use this technique if your project is to go outside, you will need the varnish for this but as my project is a canvas, this is fine.

I stuck with colours that were related to the scene, which I helped by spraying over with a water bottle as I wanted it fairly transparent in colour… DARK BLUE which I absolutely love, brown tones for the reeds and red, orange and pink tones. Now for the magical part, dry brushing … I did the dry brushing next and painted my pair of birds in BLACK POWERTEX and made some stone art clay and added this for texture to the body and neck of the birds.

49348842_279693516043131_5633009596235776000_n

I next concentrated on the wings and made a rough shape of the wings with some wire and then covered them in lace scraps that I found which resembled a feather shape

At this point, I decided to leave it all to dry overnight.

49560121_2191332807848485_3843105645192544256_n

The black sticks are now going to be my bird’s legs as I cut off the ones from the bird template.

49763668_2339036742991204_1964441028131815424_n
49628769_437361593468674_717651102010441728_n

I added some discs to the underside of the birds, so when it was all assembled they would have a height to them.

Once I assembled the birds to the canvas, I then decided to do some dry brushing to showcase all the texture and add some depth to them. I started off with the silver pigment and varnish and then topped it up with white pigment, which added extra highlights to the texture on the wings and bodies.

I took some close up photos so you can see all the yummy texture. I hope that I have inspired you to create with Powertex.

You can find all the materials you need at Powertex UK

You can find me on…

Facebook at MUMS SHED

WordPress at  MumsShed

You can get loads of inspiration from the Powertex addicts on Facebook

Being creative is not a hobby, it’s a way of life!

Thanks for reading

Jinny 

Step by step to techniques used to create a Powertex Box – Donna Mcghie

Hello and a very Happy New Year to everyone.

One of my resolutions for 2019 is to try and catch up with the modern age by getting to grips with videos in my blogs.   As you can also see, my daughter has been very helpful in getting them onto my computer for me, hence the titles of the videos.

What you will need to create your button tin:

Step by Step Instructions and Techniques:

1) As the box I was using was plastic I covered the base section with masking tape and then painted over this with Powertex Hardener so that the material would have something to adhere to.

2) I painted the lid with white gesso

IMG_20181228_171807-01
I painted the lid with white gesso so that my art deco image would show up

3) Once the bottom section was dry enough,  I turned it upside down and proceeded to soak strips of material in the Powertex Fabric Hardener and after squeezing out thoroughly placed them over the base.  At this point I was keeping the material nice and smooth as I laid it on as I wanted a flat bottom for my tin to rest on.

4) I dried this with a hair dryer and once dry enough, turned it over and started to work on my sides.  I wanted more texture on the sides, so scrunched up my fabric and added buttons as well.

IMG_20181229_154032-01
This is  a photo of the side once it has been dry brushed

If you want to you can also do this on the inside of your box.

5) Whilst this was drying off, I started to work on my lid.  I gently tore around the image I wanted to use from the Powertex Art Nouveau Rice Papers.  Then, using a good quality brush I brushed a little of the varnish onto the dried gesso, before carefully placing my image where I wanted it to go.  I then secured this in place by brushing over with a couple of more layers of varnish.  (NB: It is worth using a good quality brush for this as you want the image to be nice and smooth, the Powertex Brushes are perfectly designed for the job).

5) Once my image was in place, I carefully built up a pattern around it.  I wanted the most texture on my lid, so have done a short video to demonstrate how I did this.

6) Once the lid was covered, I added pieces of jewellery from my junk stash.  I also liked the idea of adding a frame, so used a small mdf one, and then, in memory of my nan and her tin, added some more buttons as well.

IMG_20181228_170255-01
I couldn’t resist adding a choker to my lady

7)  I left my box to dry off completely overnight

8) The next day it was time for my favourite part, dry brushing.  I wanted to give the impression of a bronze tin, whilst also subtly incorporating some of the colours on the Art Nouveau image, so I opted to use pigments in Bronze Gold, interference Blue and Interference Red.  Dry brushing is simple once you get used to the technique which is this:

  • Dip your flat brush into a small amount of Powertex Easy Varnish
  • Then dip the same brush into a small amount of whichever Powertex Pigment you have chosen
  • Now wipe the brush off on a sheet of paper towel.  This may counter productive, but it really is worth doing as you will get the best results when the brush is quite dry and will only pick out highlights, rather than smothering your design with thick colour.
  • Now you are ready to very gently, sweep your brush over your design.  Being sure to keep it flat.  You will be amazed at how quickly your design starts to come to life.

My best tip for dry brushing would be to start off gently and gradually build up to the depth of colour you want.

9) I did this over the whole of my tin.

10) And voila!! A rather bog standard plastic chocolate box that was destined to be added to landfill is now a  beautiful button box, in memory of a lovely lady.

IMG_20190102_112733-01
My finished box

I really enjoyed making this, and obviously similar boxes can be transformed in so many different ways – to reflect the personality of whoever you are making it for, or in memory of.

I hope you enjoyed this blog (please excuse the amateur video techniques, I will get better, I promise).  If you create your own version of one of these I would love to see it, and you can post photos on the Powertex Addicts Facebook Page

If you would like to see more about what I do, and why I do it my website page is www.artandmurals.co.uk

January – Product of the month – Stone Art Powder

Turquoise Powertex Stone Art Clay unicorn

Stone Art Powder – Find on the Powertex UK website.

3.jpg

Use Stone Art to make self-hardening clay, coarse and fine structures and stone effects.

Be inspired by more makes over on the Powertex UK Pinterest board.

Our Design Team and guests have shared some of their favourite makes with Stone Art Powder:

sam1.jpg

Sam Butler created these stunning Stone Art clay garden ornaments.sam2.jpg

This cute little chap is a wonderful hare created from Stone Art clay by Annette Smyth. 3.jpg

A wonderful bowl inspired by nature from Shell North.

4.jpg

Stone Art effect used on the side of this vase and on the clay flowers makes this piece a one of a kind treasure by Jill Cullum.5.jpg

Stone Art is just made for texture! Look at this amazing inter galactic work of art by Fi Potter.

3.jpeg

Stone Art can be used to sculpt adorable animals full of character as you can see with these fabulous owls by Donna Mcghie.

1.jpeg

Why not use Stone Art on your magical and practical ideas as Abigail Lagden has done with her works of art below.

0.jpg

2.jpg

Stone art works well as a clay and gives a stone effect will go on mdf bases and will cover Easy Structure and patterned wall paper for extra textural effects as seen on this hare was created by Anna Emelia Howlett.

14

Tracey Evans created this beautiful unicorn to teach as a project for the Powertex Garden Party and her portfolio workshops. Stamping into Stone art clay is another effective technique to create lots of detail in your work.

Portfolio Unicorn copy (1).png

Kore Sage brings us a piece of practical art with this stunning brush pot holder. With Powertex the possibilities really are endless.

StoneArtVase

We hope you have been inspired to get the Stone Art out and have a go! Do share your makes with us over in the Powertex Studio. See you next month with more Inspiration!

Powertex mixed media Christmas

powertex mixed media christmas

Powertex mixed media Christmas ornaments – craft diy project – Anna Emelia Howlett

Powertex mixed media Christmas tree and bauble

Anyone who knows me by now will know I am a pretty big fan of Marta Lapkowska she creates some amazing projects and works of art at Maremi Small Art. I was rather taken with her textured mixed media Christmas Tree ornament video recently. So I contacted Marta and asked her if she would mind me creating a blog inspired by her work but the Powertex mixed media Christmas way. To which she said yes! Thank you very much Marta. She also has an amazing group called Maremi’s Creative Café where you can share your makes.

I know when I shared Martas video recently someone mentioned they didn’t have one of the products. What I love about Marta is she says if you don’t have it don’t worry just used what you have. I always have Powertex in abundance on my desk. With it being a universal medium it lends itself brilliantly to projects like this.

Powertex is great not just at textile/fabric hardening but mixed media, abstract art works, sculptures and more. And would you believe you can even make a clay from it! The USA AP seal of approval and covered by EU legislations means it is safe for all ages to use. Water based and non toxic makes it my go to mixed media medium.

What you will need to create your Powertex mixed media Christmas ornaments:

Ivory Powertex, bister, sand and balls, powercotton, stockinette, polystyrene shapes, easy structure, clay stars, limoncello gold, powercolor pigments and varnish

1.jpg

Powertex mixed media Christmas bauble

Firstly, I happen to have some wire jewellery findings and so just stuck one into the top of the ball as a hanger. Although you could always use some wire and bend a loop around some pliers to make a hanger. In order to create the texture on the ball, mix some Easy Structure with Ivory Powertex to thin it down as little.

2.jpg

Next you can add in a bit of sand for extra texture. Mix with a palette knife and apply. I had the Styrofoam balls in my stash, you can use any size Polystyrene ball or shape you would like to though.

3.jpg

Top Tip: Yes you can go straight on to polystyrene shapes. But if you want you can always use a little masking tape underneath, this will make adhesion a little easier.

Next step cut some thin bandage to size. You could use a thin lace or fabric or stockinette. In order to create extra texture I pulled it apart a little. Coat in Ivory Powertex by dipping in or using a brush. And cover a section on the middle of the ball. Then coat some powercotton (which is a cotton string) and wrap around on top.

5.jpg

Coat in Ivory Powertex by dipping in or use a brush to cover and place on the middle of the ball. Then coat some power cotton (which is a cotton string) and wrap around the middle.

6.jpg

Top tip : Making a mixture with the balls in makes it easy to apply. Pour out a little Powertex and add the largest balls mix and then add the smaller ones.

7.jpg

You can use a palette knife to apply as much or as little of the mixture as you please. But try to add your own twist to the design. For mine I popped on some clay stars, I had used a cake plunger cutter to cut out all the sizes.

You could add any shapes you wanted, if you haven’t got stars. Make sure you leave this to dry completely. An hour or so should be fine. You can force the drying process with a hair dryer just be careful the heat isn’t too high you don’t want to melt the shape.

8.jpg

Spray with any Bister (a coloured walnut stain in spray form) of your choosing. For this I used Mahogany, Brown and Black Bister.

Powertex Mixed media Christmas bauble

Then I must have gotten carried away with the colouring process which is my favourite part as I didn’t take any more pictures after this. In the last step I did use some burgundy and brown Powercolour pigment and varnish around the middle and faded the top and bottom with white Powercolor pigment and varnish. Then added a touch of my fav Secret Art Loft pearl pigment Limoncello gold.

Powertex mixed media christmas bauble

Top Tip: Adding colour is my favourite part. Sometimes you have to keep layering and layering the colours and pigments to get your desired finish. Be patient with this part. It will come. I keep layering colours until I am happy with the finish.

Powertex mixed media christmas tree

Powertex mixed media Christmas Tree

Next up was the Christmas tree. I happened to have some of these in my stash too. If you don’t have a polystyrene cone you could use a cardboard cone. Use some Easy structure to cover the base of the cone. I used a little masking tape underneath to make this hold on easier.

1.jpg

I used the stockinette for the tree which is slightly thicker than bandage. And I found it easier to dip it directly into the powertex. Coat the fabric and use your fingers to work the Powertex in.

2.jpg

Then wrap around the cone. Dip your powercotton, string or mop cotton into the Powertex, work in and place onto the cone.

3.jpg

Next make up your ball mixture again and paste on with a palette knife. Then stick down your stars or shapes with some Ivory Powertex and a brush. Make sure your cone is completely dry before spraying in bister.

1.jpg

I only went and did it again with getting carried away with dry brushing I forgot to take next step photos. So I used burgundy and brown Powercolor all over the cone and then built up with white powercolour and used some Limoncello gold as a finishing touch to add a bit of sparkle.

Powertex mixed media christmas tree

You may have some time to set aside over Christmas to give this a try with your family and friends. Or you might save it for next year. But I hope you’ve found it useful to see how you can create all sorts of mixed media projects with Powertex. And a big thank you to Marta for allowing me to share my inspiration from her video through this blog.

Happy Holidays!

Have a fabulous holiday break and Christmas and I will see you all in the New Year with some very exciting projects to inspire. Do sign up to the blog, join us over in the Powertex Studio and on facebook share your makes with us. And please let us know how you get on and what you think in the comments under the article. Find my last blog if you missed it here.

Toodles Anna xXx you can find me over at Rosehart Studio.

Powertex mixed media christmas bauble

Christmas Powertex Creativeness – Jinny Holt

Well hello and seasons greetings to you all.

I do love Christmas and my Christmas mojo usually goes into overdrive at this time of year! So for my December blog, it would be rude NOT to do a Christmas tutorial and for this, I decided to do a Powertex Christmas tree. It is done with using a very few basic pieces of material and of course a bottle of Powertex. In this case, I used BRONZE POWERTEX

For this project, I used some cardboard, from which Powertex materials were delivered in,  Powertex, and an old pillowcase and some scraps of lace and sack cloth.

47579546_1170990973058346_7220253264854384640_n

I cut and shaped my cardboard into a cone shape and added masking tape to help secure it to its shape. I dipped my cut strips of pillowcase into my powertex and started wrapping the strips around the tree, the more strips you use the more texture you can create. I found some bits of lace and sackcloth and soaked these in Powertex and added them to my tree shape. I am a bit of a glue gun fanatic and decided to drizzle some hot glue down my tree shape.

Next for some colour, as I was doing this tree for a friend, she wanted a green tree, I used a mixture of colours and mediums, I started with some green acrylic and then added some Powertex pigment colours.48164589_2489309981083548_8377024022231121920_n

I have used some of the Art Lofts pearly pigment powders GOLDEN OLIVE and  to highlight and dry brush and of course, I used lots of gold LIMONCELLO GOLD!! I get kind of sidetracked when I add the colours and the pigments and it never ceases to amaze me, how your piece comes alive at this stage!

I left my tree overnight to dry off and then added some Christmas bits and pieces on it to complete the look of my tree.

So next time you think about throwing away that cardboard box, think again, what could it be? A bottle of powertex, a few bits and bobs and a pinch of imagination.

For all other ideas, tips and tricks with what you can do with Powertex try…

THE POWERTEX STUDIO

POWERTEX UK 

You can also find me on Facebook at Mums Shed

Thank you for reading this blog and I hope whatever you are doing over the Christmas season be safe and be happy and keep creating.

Until next month,

~Jinny~

Powertex Christmas ornament

It’s beginning to feel a lot like Christmas

IMG_20181129_155613.jpg

Create a Powertex Christmas ornament

I always joke in January, it will be Christmas soon. Well this is no joke we are knocking on the door of December and it will be Christmas soon! I love me a bit of Christmas, don’t you? Not all the buying presents kind. Most get hand made from me anyway. But the smells of cinnamon, orange and clove, decorating the house and being with the family. Without further ado I am going to explain how to make your own Powertex Christmas ornament.

Powertex Christmas pud

powertex christmas ornament

I remember when we were little we would get out all the Christmas cards from previous years. We would cut around the pictures with pinking shears to make Christmas tags for all the presents. Then out came the felt! We’d glue and sew little stockings and baubles with openings at the back for the chocolate coins to hide in. I’m unsure the chocolate survived until Christmas day though.

powertex christmas ornament

I hope you find inspiration for crafting with the young people in your life or just for yourself. Making Christmas decorations has come a long way. Especially when you have a bottle of Powertex to hand.

I found some plastic baubles in my stash. But you could use Styrofoam balls or up cycle an old bauble. Stone art seems to just fit this time of year perfectly.

I wrapped masking tape flush with the bauble, then used bronze Powertex  liberally over the surface. Next I gently rubbed and layered Stone Art into the surface in order to build texture. And dry brushed with red ocher powercolor.

Then I made up some stone art clay and rolled out roughly. Laid this over the top of the bauble so it would sit unevenly. I dry brushed with titanium white powercolor. Then hand cut some holly leaves out of clay and stamped into them to give them a pattern. Rolled a little clay for the berry and used Powertex on the back to stick down.

Then dusted the whole pudding with some of my favourite in the Secret Art loft range Limoncello Gold. And a dash of Lipstick fizz on the berry for an extra sparkle.

Powertex Reindeer

20181129_153519.jpg

Then I thought it would be rather fun to make ruddolf! Create in exactly the same way but with added clay antlers and nose. I used stockinette on the ears and buttons for the eyes. Then dry brushed with the same colours.

Powertex Robin

20181129_153419.jpgNext I decided it wouldn’t be right to miss out a robin and so created this little guy in the same way but just used some paper dec for the wings.

20181129_153413.jpg

Do put some creative time aside this Christmas and be inspired to create some Christmas decorations for yourself. Do join us over in the Powertex Studio and share your work. We are a lovely friendly bunch and helpful too. So if you are stuck on a project just pop in and someone will be able to help. More from me here.

Happy holidays. Toodles Anna xXx Catch me over on Facebook at Rosehart Studio.

How to build an alternative statue ……..

Hello everyone, Annette here……

I hoped you’ve all had a stunning Summer and are ready for an awesome Autumn.

My challenge this month was to create a statue representing the star sign Virgo……mmm that certainly made the old brain cells fizz.  SO……Virgo is represented by the virgin carrying wheat and she is an Earth sign.  With this knowledge I set off on my creative adventure.

Using the wood and metal base, I pushed this through a polystyrene egg (my egg came in 2 parts so I secured it was making tape around the centre and top to bottom) and then packed the bottom of the spike with foil to stop the egg from slipping down.  I used the egg so that I could get a nice full skirt that was supported underneath.

I then built up the top of the egg so that when the plaster head was seated on top the proportions were more balanced.


To attach the head, I used Grace from the European range,  take a piece of foil and wrap it around the figure just below the shoulders and attach to the plaster with masking tape (only a small amount needs to be on the plaster as this will determine your neckline).

Now open up the pocket you have made, with the foil, and sit it on top of the extended egg.  You may need to tear up the sides slightly to get it to sit properly.  Secure with masking tape making sure it is well attached.

 

As my statue is going to be carrying something, I needed to add hands and arms.  Take a piece of foil and fold it to create a narrow strip.  Place the hands at either end ensuring that the thumbs are pointing upwards at both ends.  Now wrap the foil around the wrists and secure with masking tape.

Take this strip and lay along the back of the plaster head placing the hands to the front.  Check the positioning of the hands and if necessary fold the strip back onto itself behind the shoulders if the arms are too long.  Secure to the back with more masking tape.

Using small pieces of foil fill out the arms and round them out.  Also check that you are happy with the shaping at the waist and the back of the statue, use pieces of foil to build out any areas which need more shaping.

Once you are happy with the overall shape and positioning cover everything with masking tape and then coat the whole statue, including the plaster head, body and base with a layer of Ivory Powertex. Lay a small piece of clingfilm between the hands and body to stop them sticking together.

Now let this dry

For the clothing I used Ivory Powertex and worked it through strips of Natural Paper Decoration for the bodice/sleeves and muslin for the skirt, I used four separate pieces of muslin so that I could shape each piece over the fullness of the egg.  It is also easier to work with smaller pieces that one larger piece.

Let this dry.

I liked her at this stage and would be happy leaving her here however she needed something to represent the Earth sign so…..

I took a piece of Powertex Rice Paper (the one I choose had images of the earth/sun and moon on which fitted perfectly with the Earth sign) and using a wet paintbrush I drew around the shapes I wanted before pulling them from the piece.  This causes a feathered edge which blends into your background better than a cut straight edge.

Using Powertex Easy Coat Matt varnish, I attached the pieces to the dry clothing.  I coated both the clothing and the back of the rice paper then pressed the piece into place.  Using a soft brush starting at the centre of the rice paper smooth it out towards the edges,  this stops it tearing and ensures it is all stuck down.  Now take some more varnish and coat the front of the rice paper ensuring you go over the edges.

Leave this to dry

]

She now needed colour adding in to pull everything together.

On a spare piece of fabric I tried using tea stain to see if this would work but decided it was too flat.

I played around and found that the Powercolor Yellow worked perfectly so I mixed this with Easy Varnish and heavily dry brushed the clothing.

For the hair I mixed the yellow with mocha Powercolor to give it more interest.  The eyeliner and eyebrows are a thin line of Bronze Gold  Colortrix and varnish  and the lipstick is coral Powercolor.

To finish her, I found some seed heads in a nearby field and made a small bunch for her to hold.

 

 

You could make a statue to represent any of the Zodiac star signs and use different rice papers to tie into the specific attributes of the sign.

I hope you’ve enjoyed this project and look forward to seeing what you make.  Don’t forget to post your pictures on our facebook Powertex Addicts United or Powertex Studio

Until next time, happy Creative Adventures

Axx

Memories are special moments that tell our story

 

This month the Design team has been given free rein to create a piece of keepsake art. I decided this was the perfect opportunity to take some bits and pieces rescued from my nans button box and various pots of broken bits she has kept over the years and not thrown away from her house. Last year we had to clear out my nans house because she has dementia and could no longer look after herself, so had to move her closer to us. I think she had kept everything she had ever owned. There were so many memories in bin bags in the loft. We saved some things but we couldn’t possibly save them all. Lots of memories came flooding back when we entered the sewing cupboard of summers spent in Devon at my nans sewing and creating book marks. Raiding the button tin mostly just to look at the wonderful assortment rather than use any of them.
I had prepared the base of a blank canvas a while ago with White Powertex and Easy 3D Flex. I then sprayed black bister into the cracks to make them more prominent.
 I took an assortment of elements  I had taken from my nans house. I kind of thought that they deserved to be used somehow after all she had spent her whole life keeping all these little bits and pieces. Old keys, broken watch straps, buckles, buttons, brooches, broken christmas decorations.
 I found some textiles that would compliment the layout, lace, power cotton and some netting. And created a composition.
 Now was the time to stick everything into place and coat with Powertex.
 I then resprayed with black bister just to some extra depth in the colour.
 I then took the new Secret Art Loft acrylics and painted up the left side of the canvas in Plum pudding and right side in Mint Jelly. Adding some highlights with white Powertex.
 To finish off the piece I decided to use some of the Powerwax with the Limoncello Gold pigment powder from the Secret Art Loft.
Then I hand stamped a bit of card with some alphabet letters and black ink to form the word memories. So here it is a modern take on a lot of well kept old bits and pieces from my nans, and every time I look at it I will be reminded of her. Not sure she would quiet understand what its all about mind you. Toodles Anna xXx

Simple but effective

Hello, one and all. Me again, this time sharing with you a couple of easy, fun and elegant projects.
The first piece I want to share with you is the seahorse project pack.

 

Please excuse my  Powertex covered workspace.
( I really need to clean this )

 

 

I opened the pack and looked at all the yummy stash in the pack.
Keeping this project simple was the key and I only used some cardboard and a piece of lace, which was from an old top from my Daughter.
I firstly glued to the two pieces of seahorse together with ivory Powertex both sides and dried it using my faithful old hairdryer.
I then soaked a piece of lace in the ivory Powertex and laid it down on my seahorse and again dried it with my hairdryer, to speed up the process, as I was eager to move on.

 

I found some different lace and thought it would make a good fin shape. I also added the same lace to the top part of the seahorse, after adding some cardboard, as this was my original thought process but decided that the lace effect looked way better.
Now for the best part, the colour transformation. I chose my  POWERCOLOUR and my general idea was to try an do an “ombre” effect but as you will see, sometimes the Powertex has other ideas!
BUT that is the beauty of this product, you can paint it whatever colour you like and if you get bored of it or it does not go with your colour scheme, then you can just change it!
(I really, really, must clean my workspace)

 

I added the yummy bits from the project pack and again glued with Powertex and decided to highlight in the RICH GOLD pigment and also WHITE the two colours of which I do love to highlight.
I titivated a bit more with pigments and varnish until I was happy with how she looked.
So here she is, all done and using just the project pack and a little bit of lace.
I think she turned out rather well myself.
Oh, and I added a small black bead on the eye area. A brilliant project if you are new to Powertex and not much other materials used to create this (I think ) beautiful Seahorse.
Thank you for reading and I hope I have inspired you to get some Powertex and give it a whirl, you won’t be disappointed.
Till next time
Jinny