Powertex family project

A Tryptich with a Twist – by Annette Smyth

Powertex family project, sea theme

Hello,

This month I thought I would show you a Powertex family project. This is one that you could share with the children during the Easter holidays. So this article shows you how to make a piece of family art suitable for indoor use. It breaks down nicely into mini projects which all come together towards the end.

Why not let each family member decorate their own hoop, making this a real Powertex family project to treasure.

There is no limit to the number of hoops you can connect. Just ensure the whole structure is stable and check for balance when connecting them all together.

Powertex family project, sea theme

Here’s the twist, the hoops can be worked on either side (flat or recessed) and hung either way. So if your base fabric is fine you get a lovely silhouette if hung in a window with the decorated side facing outside. You could even suspend it and let it gently twist in the breeze getting the best of both worlds.

Or why not mix it up and have hoops facing in different directions?

Heres are the products that I used

– Set of 3 unvarnished wooden embroidery hoops
– muslin fabric
Powertex translucent acrylic inks
Powertex transparent
Powertex Stone Art
KatySue Seahorse Mould
Powertex Paperdecoration
Powertex Sand and Balls Sample pack

-pipettes/waterproof cupcake cases/glass mat/small paintbrush/plastic covering for table/gloves/water spray bottle

Mini project 1 – Making the Jellyfish

Pour approximately 5mm of transparent Powertex into a cupcake case and leave to dry (this can take 2-3 days to dry completely).

When dry remove and cut in half using scissors to give you 2 half moon shapes. Take some of the white paperdecoration and pull it into fine strips. Dip one end into some transparent Powertex and stick it to the underside of the half moon. Leaving the tails of the paperdecoration uncovered gives them a soft floaty look. Leave to dry

You can move on to some of the other mini projects at this time.

Mini project 2 – Making the Seahorses.

Make a small quantity of stone art clay (see the video here for instructions) place in moulds pressing down firmly, release and set aside to dry.

Once dry, use a nail file to remove any uneven edges and paint with the translucent inks. You may need to do several layers to get a bright colour and don’t be afraid to mix the inks to make new colours.

Mini project 3 – Colouring the fabric/paperdecoration and stones

See the video below for how to colour your fabric. If you want all of your hoops to have the same background. You need to layout the hoops on the dry fabric first allowing enough space between them, to be able to cut out with a wide margin. You will need this to pull them taut on the frame later.

Alternatively let each person work on their own fabric with colours of their choice.

How to colour fabric with Powertex Acrylic Inks

To colour the paperdecoration, take a strip and spray with water. Then fold it up and dip it into the inks. If you want the colour to run spray with more water after you have dipped it. You can take out some of the inks and place them on your glass mat to allow the colours to run together and roll the paper dec in this if you prefer.

Whilst you have the inks out, place some of the balls into a cupcake cases, mix in a small amount of ink to colour the balls and tip onto a piece of plastic to dry.

Now leave all of the ink covered pieces to dry completely.

Mini Project 4 – Attaching the fabric to the frame.

When your fabric is dry, dip it into the transparent Powertex. Then work this well to ensure you have covered all areas. The Powertex will look white but dries clear.

Now lay this fabric over the solid part of the embroidery frame, place the split hoop on top and slightly tighten the screw. Work around the frame pulling the fabric taut then tighten the screen further. Next leave this to dry then paint hoop with ink to blend in with your colour scheme.

PUTTING IT ALL TOGETHER.

Using the dried paperdecoration which you previously coloured. You need to dip this into transparent Powertex and wrap it around the edges of the hoops. Ensuring that where the hoops meet you reinforce this area with more paperdecoration. Let this dry then turn over and reinforce all joins from back.

If each person is decorating their own hoop, you can leave this step to last and join them once decorated.

Powerex family project, sea theme

I opted to work on the back of the hoop, the side with a recess so that the embellishments sat inside. I added my seahorses, jellyfish and stones using transparent Powertex to attach them.

I then added additional ink covered paperdecoration to cover the rings and drape over the hoops on both the front and the back.

If you are going to hang your piece, make sure that you use some paperdecoration to create a secure loop on your project.


Powertex family project, sea theme

I hope you enjoy making this Powertex family project and we would love to see your creations. Please feel free to post them in our facebook group – The Powertex Studio.

If you would like to take a workshop with me then details of these can be found on my website page – Annnette Smyth Art and Craft Workshops.

Did you catch my last article. Click here to be inspired.

For a tutor in your local area, take a look at the Powertex Tutor Directory

Until next time , happy creative adventures…………..Axx

Stone Art Clay Powertex Birds

Mixed media Blue Powertex bird Stone Art clay sculptures

Stone Art Clay Birds of Powertex Paradise by Shell North

In December my first Design team blog goodie box arrived! I was so excited!!! I was given the theme of a pair of birds and these are some of the items I received to create something with stone art clay to hopefully inspire others. (eggs, molds and dies are my own)

I did some research for birds in the style of these new MDF bases. I’m usually quite inspired by nature but nothing I found tickled my imagination. So decided to create something whimsical and a little different. Something from my imagination that may represent a bird of paradise. Because sometimes we need thoughts of warmer places of tropical paradise in these colder month in the UK….

thumbnail_20190121_221319

Powertex uk’s favourite product of the month is Stone Art, I decided I was going to use stone art as a clay to cover this piece. I also pulled out my bottle of Blue Powertex liquid art medium. Although I love this colour, I just don’t use it enough! Mixing equal parts of Blue Powertex to stone art powder until I couldn’t stir it anymore. I kneaded it like dough until the stone art granules could not be seen. This was wrapped in cling film and left for a few hours while I prepped everything else.

thumbnail_20190120_191901

First step was to create the bird shape was cut two polystyrene eggs in half long ways and attach them to the breast areas of the MDF bases with masking tape. Molding the 3D shape of the birds with foil and covering in masking tape. Keeping the holes in the MDF bases open for the wire wings by piercing through the eggs with wooden skewers.  Then threading some wire through the bottom holes, I created a wing shape. Inserting the ends of the wires back in through the top holes on both birds, covering in foil and masking tape again. I built up the rest of the birds bodies as before with foil and masking tape.

Now the birds were fully covered in tape I pushed them onto the 2 pin metal base and molded legs for the birds with foil and tape as before to secure them.

The clay I had made earlier was now ready to use, so I warmed it slightly by kneading. I took clumps and rolled it out into sheets about 5mm thick. Wet the underneath with a little water and smoothed onto the birds piece by piece. To blend the areas as one, I again used a little water my finger tips and a small pallet knife. I also made some feather molds from the clay and added to the tail area of the birds.

For the wings I used one of my favorite texture products…. paper decor, available in a variety of colours. Today I used pink because the blue Powertex is quite dark the colour of the paper decor won’t show through. I cut feather shapes out of it and worked blue Powertex liquid hardener into each piece before smoothing on both sides of the wings.

thumbnail_20190121_223100

Next I took Bronze (brown) stone art clay. Made with stone art and bronze brown Powertex art medium from a recent workshop. Rolled a long thin sausage shape and molded the beak shapes smoothing them into place. I covered the legs using stone art clay with my finger tips, a little water and small pallet knife.

thumbnail_20190121_101242

I created a small repetitive feather texture all over the birds body on the still wet clay. By pressing the silicone texture pad against areas I needed texture. I wanted to create webbed feet, using left over wire from the wings I shaped bird feet. And covered in masking tape before paining them black with black Powertex universal medium.

I decided to add wire crests to the birds to give extra interest. By pushing thin wire through the clay and curling them at the ends. I chose some green glass eyes and pushed them into the clay. I decided to be a little quirky with the colour of the legs, as I’m creating whimsical birds. So I painted the legs stripy using licorice twist and clotted cream acrylics.

thumbnail_20190121_175436

I left them to dry for a few hours so the clay would harden a little. So it was now time to bring them to life, by dry brushing with colours. For this I used Powertex powercolor and colortrix powder pigments mixed with easy coat varnish. I used orange and then faded yellow ochre in onto the beaks. I used ultramarine blue, then turquoise mixed with a little white. This makes the turquoise pop on the body and wings. Finishing by lightly dusting rich gold over the body and terra-green on the wings.

thumbnail_20190121_181126.jpg

Well the finished piece can be seen below…..Thanks for reading my first blog as part of the Powertex UK Design team. I hope you all enjoyed what I created this time. Do join me again next month when I’m back with another article.

thumbnail_20190121_210700

Don’t forget all the items used are hyperlinked. Click the highlighted text and it’ll take you straight to items you require, to save you time searching. Please don’t hesitate to comment or ask questions below.

In the mean time why not look through all the new and old blogs. Provided for you by the Powertex UK Design team and guests. You can also find me at The Crafty Little Corner. Send me a message if you would like to do this workshop with me. Or find me on my Facebook page sharing new ideas, hints, tips and a whole lot of Powertex inspiration.

Please spread the love and share this and other blogs.

Peace, love and Paradise ūüėČ

Shell x

Bluebird – The Secret Art Box – Powertex UK – Tracey Evans

Blue Powertex mixed media Bluebird the secret Art Box Powertex uk craft subscription box

What do you put in a Secret Art Box?

When we were discussing launching our subscription boxes we loved the idea but what were we going to include?

We came up with loads of different ideas – and abandoned most of them! We settled on the fact that if we were receiving the box we would love them to have a theme but not a set project, we wanted you to be free to create whatever you felt inspired to and at the same time build a collection of products to try, we also wanted it to be suitable for all abilities.

That sounds easy enough you may think but the trouble is I love so many things, once I have a theme I could go on forever!

How would we inspire you?

We will be including a short verse on the contents page which is intended to set your imagination free, most of these have been written by one of the HQ team Claire Ivins. We hope that you are will share your projects with us using #secretartbox and #powertex on FACEBOOK and INSTAGRAM, we love to see your makes!

Each month some of our design team will also be creating projects using items from the box.

CLICK ON THE IMAGE BELOW FOR A SHORT VIDEO OF MY FIRST SIMPLE PROJECT

Bluebird Art Box

Carry on Powertexing!

Tracey X

Powertex Happiness Jars – Kore Sage

Powertex Happiness Jars

With the festive season in full swing, it’s a time we give thanks and reflect before moving into the new year. Many of us state intentions and plan to start something new. Maybe you make resolutions or choose a word for the year. I’m trying something new with this project too. Every day I write three things I’m thankful for in my journal but with this project I’m keeping them in a jar instead.¬†These Happiness Jars will help me to keep focused on positive things into the new year and through 2019.

GratJarCUWide

Happiness Jars have been around a long time in craft circles but I’ve never decorated my own with Powertex. Of course with endless Powertex possibilities I needed to narrow down a couple of techniques! I chose Stone Art and Easy Structure techniques but fabric wrapping or Stone Art clay would be fantastic. These are the jars I made using simple techniques.

Powertex Happiness Gratitude Jars by Kore Sage

Powertex Happiness Jars

The idea is to fill them up with your wishes, intentions or thanks. Use pieces of coloured paper and write thanks each day to add to your Gratitude jar or maybe a hope to your Wish Jar or a happy moment to a Memory Jar. Read these anytime or save them up for the end of the year. They make a great boost on tough days.

Gratitude Jar with Easy Structure

Supplies:

A glass jar with lid, Easy Structure, 3d Balls, mdf alphabet, clay flowers from the daisy mould, some mdf Dropouts and some bits from my stash. To finish, Red and Blue Powertex Universal Medium and Easy Varnish with Copper Colortricx pigment. Use what ever you have to embellish and colour your jar.

Clean the jar to remove any glue from the outside. Use a plastic palette knife to add the Easy Structure paste over a couple of areas on the jar and to cover the lid. I had my embellishments ready and just pushed them into the paste. The Easy Structure is super strong and holds everything really well. I added letters, a few flowers and leaves, mdf circles from the drop outs pack and some 3d balls.

It’s a good idea to clean off any paste smudges you don’t want with a wet cloth before you leave it to dry. I left mine overnight.

GratJar2

Paint your textures with Powertex, I used a mix of Red and Blue Powertex (to make a dark purple) but any dark colour will work well. Wipe off any excess Powertex from the glass and leave to dry for an hour or so.

Finishing touches are done with a dry brushing technique with Copper Colortricx. Mix a little powder pigment into a tiny amount of Easy Varnish with a flat brush, for a dry paint. Wipe off the excess onto a paper towel before brushing over the textures to highlight them.

GratJarCUSq600

Wish Jar

Supplies:

I used Transparent Powertex (but any colour will work for this), Stone Art and Colortricx Powerpearl pigment with Easy Varnish.

I stenciled shapes onto the jar (the Wonderland stencil was good for this). This was fairly easy because of the flat sides but would also work on a round jar. A little masking tape to hold the stencil in place helped before I applied a little Powertex through the stencil with a brush. Then press on a little Stone Art Powder while it’s wet. Brush away any excess. Repeat the shapes all over the jar and leave to dry for an hour.

For the lid, coat with Powertex and then Stone Art and add an embellishment. I added a wooden star left over from my Christmas stash.

Mixing up some Powerpearl pigment with a bit of Easy Varnish was a quick way to highlight the raised areas. I used a small brush to add the Powerpearl finish to the stenciled shapes and over the lid. Then a quick brush of Copper over the star. The perfect little jar for my wishes!

WishJarFinSqWeb2

A note about working on glass

Powertex will stick to glass however it can be a bit slippery! If you want to wrap fabric around your jar, small pieces of tape can help. A light weight fabric is a good choice for this project as it might not need tape.

A new start

These jars are the perfect way to start the new year, full of thanks and hope for the coming months. There are so many ways to alter the jars and make something you can treasure all year. Whether you make a wish jar, a memory keeper or a pick-me-up jar I hope you share your creation at Powertex Addicts United so I can see! How will you use your Happiness Jar?

I’m so pleased to say that I’ll be back next year with more projects for the Powertex Design Team. It’s such a pleasure to be part of this amazing team and to be creating new projects to share here. You can also find more of my projects and blogs at Kore Sage Art.

The festive season is well under way and it’s a busy time for many. However you’re spending this time of year I hope you find some time to let your art out.

Until next time,

Kore x

Christmas Powertex Creativeness – Jinny Holt

Well hello and seasons greetings to you all.

I do love Christmas and my Christmas mojo usually goes into overdrive at this time of year! So for my December blog, it would be rude NOT to do a Christmas tutorial and for this, I decided to do a Powertex Christmas tree. It is done with using a very few basic pieces of material and of course a bottle of Powertex. In this case, I used BRONZE POWERTEX

For this project, I used some cardboard, from which Powertex materials were delivered in,  Powertex, and an old pillowcase and some scraps of lace and sack cloth.

47579546_1170990973058346_7220253264854384640_n

I cut and shaped my cardboard into a cone shape and added masking tape to help secure it to its shape. I dipped my cut strips of pillowcase into my powertex and started wrapping the strips around the tree, the more strips you use the more texture you can create. I found some bits of lace and sackcloth and soaked these in Powertex and added them to my tree shape. I am a bit of a glue gun fanatic and decided to drizzle some hot glue down my tree shape.

Next for some colour, as I was doing this tree for a friend, she wanted a green tree, I used a mixture of colours and mediums, I started with some green acrylic and then added some Powertex pigment colours.48164589_2489309981083548_8377024022231121920_n

I have used some of the Art Lofts pearly pigment powders GOLDEN OLIVE and  to highlight and dry brush and of course, I used lots of gold LIMONCELLO GOLD!! I get kind of sidetracked when I add the colours and the pigments and it never ceases to amaze me, how your piece comes alive at this stage!

I left my tree overnight to dry off and then added some Christmas bits and pieces on it to complete the look of my tree.

So next time you think about throwing away that cardboard box, think again, what could it be? A bottle of powertex, a few bits and bobs and a pinch of imagination.

For all other ideas, tips and tricks with what you can do with Powertex try…

THE POWERTEX STUDIO

POWERTEX UK 

You can also find me on Facebook at Mums Shed

Thank you for reading this blog and I hope whatever you are doing over the Christmas season be safe and be happy and keep creating.

Until next month,

~Jinny~

Powertex Christmas ornament

It’s beginning to feel a lot like Christmas

IMG_20181129_155613.jpg

Create a Powertex Christmas ornament

I always joke in January, it will be Christmas soon. Well this is no joke we are knocking on the door of December and it will be Christmas soon! I love me a bit of Christmas, don’t you? Not all the buying presents kind. Most get hand made from me anyway. But the smells of cinnamon, orange and clove, decorating the house and being with the family. Without further ado I am going to explain how to make your own Powertex Christmas ornament.

Powertex Christmas pud

powertex christmas ornament

I remember when we were little we would get out all the Christmas cards from previous years. We would cut around the pictures with pinking shears to make Christmas tags for all the presents. Then out came the felt! We’d glue and sew little stockings and baubles with openings at the back for the chocolate coins to hide in. I’m unsure the chocolate survived until Christmas day though.

powertex christmas ornament

I hope you find inspiration for crafting with the young people in your life or just for yourself. Making Christmas decorations has come a long way. Especially when you have a bottle of Powertex to hand.

I found some plastic baubles in my stash. But you could use Styrofoam balls or up cycle an old bauble. Stone art seems to just fit this time of year perfectly.

I wrapped masking tape flush with the bauble, then used bronze Powertex  liberally over the surface. Next I gently rubbed and layered Stone Art into the surface in order to build texture. And dry brushed with red ocher powercolor.

Then I made up some stone art clay and rolled out roughly. Laid this over the top of the bauble so it would sit unevenly. I dry brushed with titanium white powercolor. Then hand cut some holly leaves out of clay and stamped into them to give them a pattern. Rolled a little clay for the berry and used Powertex on the back to stick down.

Then dusted the whole pudding with some of my favourite in the Secret Art loft range Limoncello Gold. And a dash of Lipstick fizz on the berry for an extra sparkle.

Powertex Reindeer

20181129_153519.jpg

Then I thought it would be rather fun to make ruddolf! Create in exactly the same way but with added clay antlers and nose. I used stockinette on the ears and buttons for the eyes. Then dry brushed with the same colours.

Powertex Robin

20181129_153419.jpgNext I decided it wouldn’t be right to miss out a robin and so created this little guy in the same way but just used some paper dec for the wings.

20181129_153413.jpg

Do put some creative time aside this Christmas and be inspired to create some Christmas decorations for yourself. Do join us over in the Powertex Studio and share your work. We are a lovely friendly bunch and helpful too. So if you are stuck on a project just pop in and someone will be able to help. More from me here.

Happy holidays. Toodles Anna xXx Catch me over on Facebook at Rosehart Studio.

Simple step by step to a cute Powertex Penguin

For this month’s Powertex Blog we were given the theme of winter crafting.

As we are getting towards the end of the year, and I have obviously got lots of lovely new Powertex goodies on my Christmas list (and I have been a fairly good girl) I thought it was a good opportunity to also use up some spare bits I had from previously in the year.

Meet Quentin

Quentin (made using bronze powertex)

Priscilla

Priscilla (made using grey powertex)

and Paulio

Paulio (made using black powertex)

What I used:
Small amount of Powertex Stone Art 
Small amount of Powertex Fabric Hardener
Powertex Colour Pigments
Small amount of Powertex Easy Varnish
Small scraps of fabric
Small Polystyrene Eggs

How I made my Powertex Penguins:

I had a few small polystyrene Easter eggs left over from Easter crafting workshops and projects, and when I looked at these, the image of a cute little penguin appeared in my mind.

Having just finished a unicorn workshop I had a small amount of stone art clay left over, (which was made using bronze powertex) which was just perfect for covering the egg to create a penguin shape.

I had my stone art clay already mixed left over from my previous workshop (if kept in an airtight container it will last for quite some time once mixed up).  But if you are mixing it fresh it is very easy to do (it always reminds me of making pastry)

Simply pour a small amount of your hardener into a tub, and gradually add stone art, little by little, mixing with a pallet knife until a dough like subtance forms.  Roll it into a ball, and keep kneading and rolling until it comes away cleanly from your hands.

I made up three small balls, as I find it easier to work in this way

mix up small balls of stone art clay using Powertex Fabric Hardener and stone art

From here I simply rolled small bits out and covered my egg shape with the clay. I like to create textures in the clay so I used a small stamp to do this as I went.  Be sure to make the base of the egg quite flat so that your penguin is able to stand steadily.

I rolled a smaller ball to create a head shape, then added small rolls flattened out to indicate the wings, and molded a beak which I added to the head.  For eyes you can use any small round beads.  I was making it up as I went along, and had some Powertex sand balls handy so used these, painted black which worked just as well.

Starting to look vaguely penguinesque

It is when you add the colour that the penguins start to come to life.  I used black, white, tequila sunrise and silver, but basically you can use any colour that takes your fancy.  These are fantasy penquins, so use your imagination.

I was quite pleased with Quentin, but something was missing.¬† My daughter had the solution.¬† ‘He needs a little scarf’ she told me, and she was right, he did.¬† So I simply cut up an old scarf from my stash of material, soaked in transparent powertex and wrapped it round him to keep him nice and snug.¬† The final touch, and purely optional was some frosty glitter.

I was so pleased with him, and with how easy it was to make, that I made up some more stone art clay using some black powertex that had been lingering in the bottom of a bottle, and also some grey and made him a mum and a dad, so now I have my own cute little Powertex Penguin Family

Quentin, Priscilla and Paulio – keeping as snug as possible against that cold wind

These were genuinely quick and easy to make – and a great way to use up any last bits of stone art clay or powertex that you have lying around.

If you decide to make a Powertex Penguin we would love to see your photos over at the facebook page  Powertex Addicts United

You can see more of my makes on my website www.artandmurals.co.ukwww.artandmurals.co.uk