Top Ten Tips for a Powertex Christmas – Annette Smyth

Hello Everyone

I don’t know about you but I just love this time of year.  I have Christmas movies and music playing in the background from the beginning of November!!

So in the spirit of the season,  I wanted to share some ideas with you on how to get a wintery festive feel into your projects.  So here are my top ten tips for Christmas crafting along with some festive musical titles (how many can you recognise?)………..

1. LET IT SNOW, LET IT SNOW, LET IT SNOW………

bKbHH%GzQUKlznYCVKHl+A

In my opinion you can never have enough snow!

Mix small 3D Balls and 3D Sand into White Powertex to get a textured snow effect. Experiment with different amounts of each until you get the consistency you need for your project.

Dry brushing with Powerpearl pigment makes the snow glisten.

2.  OH CHRISTMAS TREE, OH CHRISTMAS TREE ………

fullsizeoutput_15aa.jpegIcelandic/Reindeer moss coated in Transparent Powertex makes a lovely textured Christmas tree.  Be sure you give it enough time to dry – I left mine overnight, be careful if you use a hairdryer to speed up the process as you can burn the moss.

Here I have used moss that has been dyed bright green. The Powertex makes the dye bleed very slightly, so be aware of that when placing onto your project.

As the Powertex dried and became stickier,  I used a skewer to push the tree into shape.

3. (Christmas) PRETTY LIGHTS ON THE TREE……..

fullsizeoutput_15cd

Coat the large 3D Balls in Powertex and then dry brush with the pigments of your choice to make beautiful Christmas lights. To get a real shine coat with Easycoat Glossy. 

These can then be placed onto your tree and for a stringed light effect use Powercotton coated in transparent Powertex to connect the lights together.

4. DECORATIONS OF RED ON A GREEN CHRISTMAS TREE……

fullsizeoutput_1603

Well actually the decorations can be any colour you like.

Use Stoneart clay and your favourite silicon moulds to create decorations for your tree. Attach to your project using Transparent Powertex .

Watch the video in the Penguin blog to see how to make Stoneart clay.

Dry brush with pigments to complement your chosen colour scheme

5. MERRY CHRISTMAS MR BUBLE……

fullsizeoutput_15bb

Ok so I cheated on this title as I couldn’t think of any song with baubles in it……but you can’t have Christmas without a bit of Mr Buble.

Take a ball of Stoneart clay, insert a loop of cotton then coat with Easy Varnish.

Dip into glitter for a sparkly look or coat with your snow mix to look like a snowball.

6. WITH AN EVERGREEN WREATH ON A RED FRONT DOOR……..

4O2GKWnNS9eUvwBX+SZRlA

You can make a great Christmas wreath by using a mdf cog.  Coat with a layer of Powertex Green.  Dip strips of Paperdec into the Powertex and lay around the cog in a circular shape.

Dry brush with Colortricx Terragreen pigment and sprinkle on a little snow to finish your wreath.

7. DECK THE HALLS WITH BOUGHS OF HOLLY…………

fullsizeoutput_15d8

Use your Stoneart clay with any cutters you have to create embellishments.  Here I’ve used a sugarcraft holly leaf cutter with green clay.  Remember to keep these cutters for non food use only.

The holly berries are 3d Balls dipped  in Powertex and drybrushed with red pigment then coated with Easycoat Glossy.

8. WITH THOSE HOLIDAY GREETINGS AND GAY HAPPY MEETINGS……

fullsizeoutput_15e9

You can add any greetings you like into your project by using the mdf letters .

I coated mine in the base colour then placed them onto my project.  Using white Powertex I then painted over the top to make them stand out.

9. THE PRETTIEST PICTURE YOU’VE EVER SEEN IS CHRISTMAS IN KILLARNEY……

aYfLwRnhS9Oa+Yyg5ii4pw

You can add a focal point into your project by using the Powertex rice papers.  

Select the image you want to use and draw around it (leaving a small margin) using a wet paintbrush.  Now gently pull away the excess paper keeping your hand on the image, this way if you tear by mistake it will be the waste that you rip into and not your picture.

Attach to your project using Easycoat Matt.

10. RAISE A CUP OF CHRISTMAS CHEER………..

close up of beer glass against black background
After all your hardwork treat yourself to a little of what you like
Merry Christmas and Happy Creative Adventures…..see you all in the New Year
Axx

Penguins – Mini Makes for you and the little ones

Hi Everyone

Well we’re at that time of year again where time just flies by and everything you wanted to get done somehow doesn’t.  So I thought I’d show you a nice easy make that you can do on your own, with friends and with the little ones.

We are going to make penguins and I have to admit they are a little addictive so you may well end up with your own little waddle  – that’s one name for a group of penguins on land, they can also be called a colony or a rookery whereas when they are in water they are called a raft (thanks Google!!).

So lets waddle away and get creating…….

You will need

Powertex Black (approx 75ml)
Powertex Stone Art (approx 20g)
6cm Polystyrene egg
2-3 cm Polystyrene egg
2 x 2-3mm animal eyes
Cocktail Stick
Masking Tape
Plastic container to mix clay in
Brush
Pigments (I opted for orange, white and yellow ochre)
Apron
Disposable Gloves
Optional – Pokey tool
Start by covering your work area with a protective layer.  This could be an waterproof tablecloth, oil cloth or even newspaper.
Break the cocktail stick in 2.  Using one piece connect the 2 eggs together to form a body and head
Place the head at an angle for a more realistic look
Using the masking tape cover the whole shape ensuring that the the transition from the head to the body forms a neck. Place the other piece of cocktail stick on the small egg where the beak will be.  Now coat with a layer of Black Powertex and set aside.
Place approximately 75 ml of Black Powertex into a suitable container (you are going to be mixing this so make sure the sides are high enough) and begin adding the Stone Art, using the non bristle end of your paintbrush begin to stir the mixture.  Add the Stone Art slowly and mix well between each addition.  Keep going until the mixture pulls away from the sides.  Now go in with your gloved hands and knead the mixture bringing together into a firmer clay consistency.  Keep adding more stone art until the clay doesn’t stick to your gloves and there are no white flecks showing.  Make sure you pull the clay apart to check that there are no white flecks inside.
Make sure that the clay isn’t too dry otherwise you will have difficulty covering your penguin. If it is just dip it in a small amount of Powertex and knead it thoroughly.
You can now use the clay or double wrap it in cling film for use later.  So long as you keep it airtight the clay will be useable for several weeks.  This is a bonus as you can make the clay ahead of time and have fun sculpting it later with the children.

 

Take approximately 2/3rds of the clay and roll it into a ball then flatten it into a disc approximately 1/2 cm thick.
Lay it over the beak and onto the head, then using your fingers push it down onto the body thinning it as you go.  Make sure it meets underneath to form a base.  Stand the penguin on your work surface and give it a little wiggle to make sure it will sit without toppling.  If it doesn’t sit properly use a little of the remaining clay to make some feet and/or a tail to support it.
                                      
With the remaining 1/3 clay split it into 2 and form rolls.  Flatten them to around 2mm and shape to form wings.  Attach to the body on the sides.  If your clay has dried, paint on some fresh powertex to stick the wings to. Shape the wings to give your penguin character.
Now make any final adjustments, make sure the beak is a nice shape and push the eyes through the clay into the underlying egg.  You may need to use a pokey tool to make the hole first.
Using the Easy Varnish and pigments dry brush on the colour to complete your penguin.  I opted to colour mine in different ways to make a real mixed waddle.

 

 

Don’t forget, you can always scale it up by using larger eggs to make bigger penguins just remember to increase the amount of clay you make.
I hope you’ve enjoyed this project and look forward to seeing your makes.  Don’t forget to post photos of them over on the Powertex Studio facebook page
Until next time happy creative adventures

 

 

Warwick Poppies and Powertex

 

Hello there

As many of you are aware, in November this year we commemorate the 100th anniversary of the end of the the First World War (The Great War).

Our county church, St Mary’s Warwick, has a history of involvement with the military and is home to the Royal Warwickshire Regimental Chapel and so they have organised a memorial exhibition of handmade poppies to be displayed throughout October and November.

These will be created and donated by the local community and beyond.

The aim is to display over 11,000 poppies to represent the number of men lost from the Royal Warwickshire Regiment.  Each poppy will be unique just like the men who gave their lives.

I contacted the organisers to see if I could help in any way.  They asked if I could work with the Warwickshire Young Carers to help them create their own poppies for this project. A big thank you to  The Art Society – Leamington Spa, who covered the cost of materials.

We decided that creating larger poppies made from individual petals would allow the children to work on their own individual piece but when they then came together as a whole flower, they could see how working as a team created something bigger.  This could then be reflected back on how the soldiers had worked together during the conflict.

For the petals we created a wire form using reclaimed wire, covered this in masking tape, then applied gauze from the local scrap store which had been coated in red Powertex.

A large bag of potpourri, that had been found in a local recycling centre, provided seed heads.  These coated in black Powertex became the poppy centres.

The poppies will be on display during October and November at

Collegiate Church of St Mary, Old Square, Warwick CV34 4RA


To find more details about the Warwick exhibition please click here

 

Click here to find out more about the Warwick fallen of World War I at

Until next time

Happy Creative Adventures

Axx



 

 

 

 

How to build an alternative statue ……..

Hello everyone, Annette here……

I hoped you’ve all had a stunning Summer and are ready for an awesome Autumn.

My challenge this month was to create a statue representing the star sign Virgo……mmm that certainly made the old brain cells fizz.  SO……Virgo is represented by the virgin carrying wheat and she is an Earth sign.  With this knowledge I set off on my creative adventure.

Using the wood and metal base, I pushed this through a polystyrene egg (my egg came in 2 parts so I secured it was making tape around the centre and top to bottom) and then packed the bottom of the spike with foil to stop the egg from slipping down.  I used the egg so that I could get a nice full skirt that was supported underneath.

I then built up the top of the egg so that when the plaster head was seated on top the proportions were more balanced.


To attach the head, I used Grace from the European range,  take a piece of foil and wrap it around the figure just below the shoulders and attach to the plaster with masking tape (only a small amount needs to be on the plaster as this will determine your neckline).

Now open up the pocket you have made, with the foil, and sit it on top of the extended egg.  You may need to tear up the sides slightly to get it to sit properly.  Secure with masking tape making sure it is well attached.

 

As my statue is going to be carrying something, I needed to add hands and arms.  Take a piece of foil and fold it to create a narrow strip.  Place the hands at either end ensuring that the thumbs are pointing upwards at both ends.  Now wrap the foil around the wrists and secure with masking tape.

Take this strip and lay along the back of the plaster head placing the hands to the front.  Check the positioning of the hands and if necessary fold the strip back onto itself behind the shoulders if the arms are too long.  Secure to the back with more masking tape.

Using small pieces of foil fill out the arms and round them out.  Also check that you are happy with the shaping at the waist and the back of the statue, use pieces of foil to build out any areas which need more shaping.

Once you are happy with the overall shape and positioning cover everything with masking tape and then coat the whole statue, including the plaster head, body and base with a layer of Ivory Powertex. Lay a small piece of clingfilm between the hands and body to stop them sticking together.

Now let this dry

For the clothing I used Ivory Powertex and worked it through strips of Natural Paper Decoration for the bodice/sleeves and muslin for the skirt, I used four separate pieces of muslin so that I could shape each piece over the fullness of the egg.  It is also easier to work with smaller pieces that one larger piece.

Let this dry.

I liked her at this stage and would be happy leaving her here however she needed something to represent the Earth sign so…..

I took a piece of Powertex Rice Paper (the one I choose had images of the earth/sun and moon on which fitted perfectly with the Earth sign) and using a wet paintbrush I drew around the shapes I wanted before pulling them from the piece.  This causes a feathered edge which blends into your background better than a cut straight edge.

Using Powertex Easy Coat Matt varnish, I attached the pieces to the dry clothing.  I coated both the clothing and the back of the rice paper then pressed the piece into place.  Using a soft brush starting at the centre of the rice paper smooth it out towards the edges,  this stops it tearing and ensures it is all stuck down.  Now take some more varnish and coat the front of the rice paper ensuring you go over the edges.

Leave this to dry

]

She now needed colour adding in to pull everything together.

On a spare piece of fabric I tried using tea stain to see if this would work but decided it was too flat.

I played around and found that the Powercolor Yellow worked perfectly so I mixed this with Easy Varnish and heavily dry brushed the clothing.

For the hair I mixed the yellow with mocha Powercolor to give it more interest.  The eyeliner and eyebrows are a thin line of Bronze Gold  Colortrix and varnish  and the lipstick is coral Powercolor.

To finish her, I found some seed heads in a nearby field and made a small bunch for her to hold.

 

 

You could make a statue to represent any of the Zodiac star signs and use different rice papers to tie into the specific attributes of the sign.

I hope you’ve enjoyed this project and look forward to seeing what you make.  Don’t forget to post your pictures on our facebook Powertex Addicts United or Powertex Studio

Until next time, happy Creative Adventures

Axx

So what do you do with your spare Powertex??

Hello there

I hope you are well and have enjoyed this lovely Summer.

So here’s the question……..

What do you create with the spare Powertex left in your tub?

You know that little bit you have left when you’ve been slightly too generous with yourself when you’ve been pouring out….

Here are a few of the things I use it for.

1. Coat a spare piece of fabric and a plaster embellishment and create a brooch.

These can either be coloured or left as the base colour so that you can colour them to fit into your future project.

2. Coat a spare piece of fabric, scrunch it up and let it dry.  You now have somewhere to try out your dry brushing colours before going onto a finished piece.  This is great if you want to try something a little different to your normal colour choices.

3. Take a strip of fabric, coat it with the Powertex and roll it into a flower.  Once dry these can be added into a future project.  Again these can be dry brushed at a later date to fit in with your project.

4. Mix it with Stone Art and create a clay,  double wrap this in clingfilm and store in a sealable bag or box and this will last for several weeks.  Alternatively sculpt it into a freeform shape or use it in the moulds to create embellishments.  Again these can be kept until you need them.

 

5. Create a Powertex mask.
Either let the Powertex set in the container or pour it out onto a non stick mat creating a more controlled design.  Leave to set then peel off.


These can be added into projects to give even more layers and textures.

Here the Powertex was left in a round tub and gave a lovely curved effect to sit the skull into.

6.  Take some of your MDF embellishments, coat them with Powertex and apply Rusty Powder, spray with vinegar mix and leave to dry.  You then have ready rusted embellishments at your disposal


I bet you have other ways of using your Powertex,  why not hop onto the Powertex Studio facebook page and share your ideas with everyone.

Until next time happy Creative Adventures

Annette  x

Keepsake Kubes – a unique way to remember…..

Hello there

Our project theme this month is all about keepsakes, mementoes and lovely memories, so in keeping with that I would like to share with you my Keepsake Kube(s) …….there is an extra ‘s’ as I am sure you’ll want to make more than one!!

My Kube has all the memories of a little girl’s first year, I thought it would be lovely to continue building more blocks adding more memories as she grows so that by the time she has her own family she will have a full set of building blocks.

So here we go………

For this project you will need

A cube shape – I used 6 empty wooden mini trays to make mine, as I love to recycle,  however you could use a cardboard box, mdf or even plastic.
Masking tape
Powertex – Transparent
Powertex Easy Coat Mat Varnish
Old clothes – natural fibres work best
Pieces of ribbons, buttons etc
Piece of cardboard
Typewriter or computer/printer

I stacked the trays on top of one another, making sure that the top and bottom were solid sides, then I secured them all together with masking tape and coated them with Powertex.

Don’t forget to give your Powertex a good shake before using and only pour out a little at a time as it is air drying.

If you are using cardboard or plastic,  cover with the masking tape and coat with Powertex ( for cardboard – coat one side at a time, letting it dry in between to prevent the cardboard from sagging).  You can always speed your drying time up by using a hairdryer.

If you are using MDF then apply a layer of transparent directly to the base to help seal it.

I then took a selection of baby clothes and other memorabilia  – and cut out interesting bits eg embroidered motifs, metal fastenings, pieces of the base fabric, lace edgings, buttons, ribbons etc

I laid these out on the cube to see which pieces looked best where and once I was happy I coated each piece with transparent Powertex and then placed it on the cube giving it a firm push to make sure it was properly adhered.  I layered the motifs on top of the base fabrics after they had been coated in the Powertex. It is best to work on one side at a time allowing it to dry thoroughly, this way nothing will fall off as you are turning the cube over.

💡Why not use pinking shears to give your pieces a funky edge and prevent fraying.


When working with the transparent, make sure you take your time to cover all of the fabric as it can be difficult to see where you have been and remember although the Powertex will look milky when you pour it out, once dry it will be transparent.

To attach the plastic buttons I used a dab of Easy Coat Matt varnish.

 

I worked the 3D bears head last as this would take more time to dry.  I then left the cube for a couple of days to allow the bear to completely firm up.

I created the tags by using a good old fashioned typewriter and cardboard, you can also create the tags on the computer and print them off or hand write them with a waterproof pen.

 

When the fabric cube is completely dry, attach the tags again by using the Easy Matt Varnish.  I applied a coat of varnish over the top of the tags as well to make sure they were secure.

Now have a good look at the cube, does it need anything extra adding?  – don’t forget with Powertex you can continue to add onto already hardened items.

💡So now you’ve created your first cube, what will be on your next one?  How about one just for the school years, or their budding football career, a unique 21st birthday or even a wedding day keepsake with confetti etc……

I hope you have enjoyed this project and don’t forget to share your makes with us over on our facebook page – The Powertex Studio. or why not continue your Powertex adventures by joining your local tutor on a workshop.

Until next time

Happy Creative Adventures

Annette

Why I LOVE Stoneart…………

Hello there

I hope you’ve been enjoying the recent spell of warm weather and haven’t been too affected by those nasty thunderstorms…..living in the Midlands we’ve had the joy of both ends of the weather spectrum!!

This month I wanted to share with you my absolute love for Stone Art so I took the monthly theme from Powertex UK and created a masquerade statue using Stone Art in its various forms mixed with Black Powertex.

Stone Art is a unique fiber-composition which has been especially designed for use with Powertex Universal Mediums. 

The reason I love working with this product is the total flexibility you have with it.  You can use it with any of the Powertex Universal Medium colours although I choose not to use the transparent unless I’m adding pigment in to colour it at the same time.

To start off you can layer it on top of a coat of Powertex, press in to form a bond then gently wipe away the excess into a pot for reuse later.  By repeating this process you can build up the stone effect on canvas, polystyrene, wood etc and you waste nothing as all of the excess can be reused.  Polishing the layers with your hand will cause a more natural effect and will cause the darker areas to have a slight sheen.

Next you can mix your Powertex Universal Medium with the Stone Art in a pot to create a slurry of various consistencies.  In its loosest state you can paint this onto any surface to give a rustic texture.  As it gets thicker, you can use a palate knife to spread over your base.  The thicker the mixture the more control you have over it.

 

Finally you can go all the way and make up Stone Art clay by adding more powder to the slurry stage and then kneading (like bread) to make sure all the white has been absorbed into the coloured liquid.  Again you can choose how firm you mix this before working with it.  When covering statues etc I keep mine on the tacky side so that I can blend in any joins.   However when working on a canvas, I tend to make it firmer so that I can imprint into it with stamps and stencils, these imprints will come out with a rustic feel due to the nature of the clay.  In this firm state you can also use it in silicon moulds to create beautiful embellishments.

I finished my statue by adding the venetian mask from the Powertex range, I coated with black Powertex and then dry brushed with Rich Gold pigment.  As a finishing touch I tucked feathers into the collar…..after all this is all about masquerade!

Until next time Happy Creative Adventures and don’t forget to post your makes on the Powertex facebook page

Axx

Teatime in wonderland, wearing my best hat!

Hello lovely people.
I hope you enjoyed the show on Hochanda and it has got your creative juices flowing.
I was lucky enough to try out the project packs before the show and I have to say I really enjoyed doing them.
I created the hat first as my muse was screaming at me to do that one.
Sadly I did not do step by step photos as I was way too excited to crack on and play.
I had a piece of quite chunky crochet material I wanted to use and this was just the job.
I first laid out all the parts of the kit and decided how I was going to display them, before getting out the Powertex and going for it.
My muse already knew what colour theme I was going to do, so first I painted the top hat in the BLUEBERRY PIE and MOJITO LIME
Paint and Powertexed my crochet material and laid it on the hat.
I used the green and did a bit of blending with the blueberry and dry brushed with the white pigment to highlight.
I added the rice papers to the playing cards and added texture in the form of sand balls to the top part of the cards.
I took the feather and added texture to that using stone art and Powertex and used a pokey tool to make it look like a feather, dry brushed with black.
I used more of the crochet material to the bottom part of the hat and then measured and soaked some material to give it a more 3D effect to the middle part of the hat.
I used easy 3D FLEX on the tag and gave it a crackle effect using some brown bister and added the MDF numbers and painted them with easy varnish mixed with black pigment.
And my mad hatter’s hat I felt was completed.
The next kit I found more of a creative challenge and my muse was stumped on how to go about this one, I think as the rice papers are so pretty, it kind of threw me a little, as this is not more normal style!
 I sat and played around with combinations for a while until I decided upon a design my muse liked but once I started, I did not stop until it was done.
Firstly I wet ripped the rice paper, by this I mean if you dunk a fine paintbrush in water and run it around the part of the rice paper/tissue paper you want to use, it comes away quite easy and looks a better finish when laid down on a structure.
I then added lace to other parts of the teapot and cups and saucers and decoratively painted the flowers and flamingo and the little mouse on the top. I added a piece of string dipped in transparent Powertex. I painted the MDF wording in the blue paint and stuck down using Powertex as my glue.
I forgot the mention I added a few lace butterflies as well.
It turned out very pretty (for me) and I loved incorporating the rice papers into my design.
I hope all the design team blogs on this theme have inspired you all.
Until my next blog …. Go be creative
Jinny x

Cheshire Cat on the Mad Hatter’s Hat

Hello there,
I had a great time with the Top Hat kit that I wanted to share with you how I created the Cheshire cat on the Hat that was shown on the Hochanda show with Tracey Evans.
Along with the kit I used the mdf Alice and Grin embellishments.
To start with I assembled the hat using the hat band on the back and front to secure it, then I prepped all of the embellishments so that they were ready to place in the fabric whilst it was still wet

I started by using clear domes to create the eyes.  Using Powercolor black pigment mixed with Easy Varnish I painted the iris onto the flat side of the dome, let that dry completely then cover the whole of flat side with the Key Lime paint repeat this several times to get the depth of colour but let it dry between layers. Set aside.

Using the beautifully bright acrylic paints coat the letters, grin and Alice.  Don’t forget the sides. Set aside.

Take the mdf playing cards and using a craft knife carefully cut the shape from the top of the card and use this to fill in the gap in the centre.  Coat the card with a layer of Ivory Powertex, let it dry completely.  Using a wet paintbrush draw around the image on the rice paper and gently pull away the areas not needed.

Coat the mdf playing card with varnish then lay the rice paper image on  top,  using more varnish go over the top of the image and sides of the card pressing gently to adhere.

When dry coat the edge of the card with Powertex Black.

 

For the ears, mix up Powertex Black and Stone Art into a clay (when it no longer sticks to your hands its ready).  Shape two ears and set aside to dry.  Make sure you have a flat area that will sit nicely on the hat.

 

Whilst everything was drying I laid out the stripes on my cat, here is is shown using tin foil however as I had extra Stone Art clay I used that to make the stripes.

For the tail, I removed the quill part of the feather and used the Stone Art to depict the stripes.

Once I had them in position I painted the whole of the hat and tail in Black Powertex.

Using gauze and Black Powertex I then covered these making sure you press around the raised areas to get definition for the stripes.  Place the eyes and use a small piece of gauze to create eyelids.

Whilst this is wet place your letters, ears ( you may need to add additional Powertex to the flat part to ensure a good bond), Alice, Grin, Playing cards and the tail.  Use additional gauze to build underneath any embellishments that need more support.  Let dry

I then dry brushed the stripes and ears with a combination of the Blueberry Pie paint, Raspberry Sorbet paint and white pigment to get the shading.

I hope you have as much fun with the kit as I did and don’t forget to post your makes on our Powertex Studio Facebook page.

Happy Creative Adventures

Axx

 

Time flies by Annette

Hello Everyone

I hope you’ve kept yourselves safe in the recent bad weather and have used the time to get an extra bit of Powertex play in.

This month I’ve used the new Powertex UK Pocket Watch Project Pack to create a birthday card with a difference.  I’ve made it for Granny Smyth at the age of 75 but you could create this for any age and just move the hands to different positions and use different numbers.

I hope you have fun and remember to post your makes on the Powertex Addicts United Facebook page, you know we love to see what you create.

 

To complete my piece, I used the kit along with texture paper, Rusty Powder , Yellow BisterEasy Varnish and pigments.  I mixed my bisters with a 50/50 solution of white vinegar and water to make the colours pop.

Start by laying out the pieces to see which ones you want to use.  The photograph is a laser copy cut to size.

Take a piece of textured paper and draw around the inner circle, cut this out and place to one side

Now coat the front of the base of the watch with Ivory Powertex and stick the texture paper to the centre. Attach the front of the watch to the back (you may need to add a little more tex around the edge then coat the front with the Ivory Powertex also.

Now spray with the blue and yellow bister mixes
and dry with a hairdryer.

When dry turn it over onto a clean work surface and coat the back with Ivory Powertex, I then used and old credit card to add texture by lying it flat on the surface and lifting it up (bit like making your snow peaks in royal icing).  Spray with the blue and yellow bisters and dry with a hairdryer.  By raising the base from the table whilst doing this step, it will help to stop any stray colours from seeping onto the front.

 

When dry use a slightly damp sponge to remove the excess colour from the watch.

I choose to colour my embellishments separately.  Coat them all with a layer of Powertex Ivory.

Randomly add extra Ivory then drop on some Rusty Powder and spray with the bister mixes, leave to dry on one side.


You can keep spraying these with pure white vinegar to get the rust to develop further.

These pictures show the cogs,  I repeated the same process for the other embellishments (except the heart) varying the amount of rust and colour I added.

For the heart, I painted a layer of Easy Varnish over the front of the photograph, by holding the paper taut whilst it dries it doesn’t wrinkle,  once dry repeat on the rear.  Now using the heart as a template cut out the photograph and using the Easy Varnish attach it to the heart and coat with several layers of varnish to seal it.

 

Place a small amount of Ivory Powertex into a pot, sprinkle on the
Rusty Powder then spray with the bister mix.  Now stir


Using a paint brush apply this around the photograph then sprinkle on more Rusty Powder and spray with the bister mixes.  As you can see the bister will wipe away from the photograph as you have previously sealed it with the varnish.  Again spraying with more vinegar as it dries will encourage the rust to form.

Now add all the embellishments to the base using Powertex, make sure you clean up any excess as you go,  I used some of the spare pieces in the kit to support the heart in the centre.

When it was all dry, I used a combination of Bronze Gold, Copper and Silver pigments to add a little sparkle.

I hope you have great fun creating your own Pocket Watch and until next time Happy Creative Adventures

Axx