A Powertex mixed media project – Heron canvas – Jinny Holt

Tranquillity at sunset

Good morning fellow creative people, my project for January was a pair of MDF birds and they look like Cranes which are very similar to Herons, well I think so, which is a bird I see on a more or less daily basis when I take our dog for a walk by the river, so my cranes have now become herons.

49701109_225105988413800_1671287734695624704_n

I have to confess in my head I was going to do freestanding birds, not dissimilar to a fellow Design team member, so I had to rethink how I was going to bring my birds to life. Then it hit me, why not do them on canvas! So this was my train of thought. I had an old powertex canvas and decided to recycle this as the backdrop for my birds.

49580984_2526828210677053_4624620385453735936_n

 In fact, I already quite liked this canvas as a backdrop and helped me to plan a backdrop for my birds. I then added some extra texture to this canvas, using TRANSPARENT POWERTEX  to help adhere my texture to the canvas.

49344787_280667132612727_2592093422621818880_n

I had a rummage through my stash and found these old split washers and nuts, which I overlayed over pieces of odd scraps of lace and PAPERDECORATION and a little bit of stone art paste which has added more texture to the canvas.

TOP TIP ~ when using paper decoration, spray with water before soaking in Powertex, it will react quicker and thus save creative time ~

49457160_271157443581458_353789311008636928_n

I have also added some little pegs to give the illusion of reeds.

49831323_398316947599499_3766798679231430656_n
I added extra texture on the sun part of the old canvas with stone art clay.
49467920_2204467493109513_5402195115991105536_n

I next painted the whole canvas with a thin layer of Ivory Powertex, just to give it a base for the new colour.

49864934_763425604056154_5110100845525991424_n

I then painted my canvas with pigment colours and the secret art loft paints.

TOP TIP ~ Did you know you can use your pigment colours like watercolours?

I would not use this technique if your project is to go outside, you will need the varnish for this but as my project is a canvas, this is fine.

I stuck with colours that were related to the scene, which I helped by spraying over with a water bottle as I wanted it fairly transparent in colour… DARK BLUE which I absolutely love, brown tones for the reeds and red, orange and pink tones. Now for the magical part, dry brushing … I did the dry brushing next and painted my pair of birds in BLACK POWERTEX and made some stone art clay and added this for texture to the body and neck of the birds.

49348842_279693516043131_5633009596235776000_n

I next concentrated on the wings and made a rough shape of the wings with some wire and then covered them in lace scraps that I found which resembled a feather shape

At this point, I decided to leave it all to dry overnight.

49560121_2191332807848485_3843105645192544256_n

The black sticks are now going to be my bird’s legs as I cut off the ones from the bird template.

49763668_2339036742991204_1964441028131815424_n
49628769_437361593468674_717651102010441728_n

I added some discs to the underside of the birds, so when it was all assembled they would have a height to them.

Once I assembled the birds to the canvas, I then decided to do some dry brushing to showcase all the texture and add some depth to them. I started off with the silver pigment and varnish and then topped it up with white pigment, which added extra highlights to the texture on the wings and bodies.

I took some close up photos so you can see all the yummy texture. I hope that I have inspired you to create with Powertex.

You can find all the materials you need at Powertex UK

You can find me on…

Facebook at MUMS SHED

WordPress at  MumsShed

You can get loads of inspiration from the Powertex addicts on Facebook

Being creative is not a hobby, it’s a way of life!

Thanks for reading

Jinny 

Christmas Powertex Creativeness – Jinny Holt

Well hello and seasons greetings to you all.

I do love Christmas and my Christmas mojo usually goes into overdrive at this time of year! So for my December blog, it would be rude NOT to do a Christmas tutorial and for this, I decided to do a Powertex Christmas tree. It is done with using a very few basic pieces of material and of course a bottle of Powertex. In this case, I used BRONZE POWERTEX

For this project, I used some cardboard, from which Powertex materials were delivered in,  Powertex, and an old pillowcase and some scraps of lace and sack cloth.

47579546_1170990973058346_7220253264854384640_n

I cut and shaped my cardboard into a cone shape and added masking tape to help secure it to its shape. I dipped my cut strips of pillowcase into my powertex and started wrapping the strips around the tree, the more strips you use the more texture you can create. I found some bits of lace and sackcloth and soaked these in Powertex and added them to my tree shape. I am a bit of a glue gun fanatic and decided to drizzle some hot glue down my tree shape.

Next for some colour, as I was doing this tree for a friend, she wanted a green tree, I used a mixture of colours and mediums, I started with some green acrylic and then added some Powertex pigment colours.48164589_2489309981083548_8377024022231121920_n

I have used some of the Art Lofts pearly pigment powders GOLDEN OLIVE and  to highlight and dry brush and of course, I used lots of gold LIMONCELLO GOLD!! I get kind of sidetracked when I add the colours and the pigments and it never ceases to amaze me, how your piece comes alive at this stage!

I left my tree overnight to dry off and then added some Christmas bits and pieces on it to complete the look of my tree.

So next time you think about throwing away that cardboard box, think again, what could it be? A bottle of powertex, a few bits and bobs and a pinch of imagination.

For all other ideas, tips and tricks with what you can do with Powertex try…

THE POWERTEX STUDIO

POWERTEX UK 

You can also find me on Facebook at Mums Shed

Thank you for reading this blog and I hope whatever you are doing over the Christmas season be safe and be happy and keep creating.

Until next month,

~Jinny~

Crafting in Winter

Hello, hello

Me again with another blog for the Design team. My brief for this blog was “Winter Crafting” well this had me thinking about Christmas, as I do love Christmas, even at my age! I love, love, love making Christmas creations and would happily make Christmas creations all year round.

My first creation is a Christmas bauble and I was very inspired by a recent trip to Roslyn Chapel, if you have never been, you should visit, if in Scotland. The place is amazing and all the carvings inside the chapel are all unique, every single pillar and archways.

For this project I used…

One polystyrene egg form
Ivory Powertex
Stone art clay
Molds
Plastic bottle top

I made up some Stone art clay, brushed my moulds with some dry stone art, so as not to stick.
I then placed the moulded stone art clay to my egg form and glued them down with the Transparent Powertex. Then dried off with my hairdryer
I then painted the dried egg form with the dark brown powercolor pigment and had already decided I wanted to do an ombre effect on my Christmas bauble with brown and cream, I used Ivory Powertex as my cream colour.
I then turned my egg form upside down and glued on a plastic lid from my Grandsons discarded drinks bottles, always good to recycle and it was perfect for the topper of a bauble.
I dry brushed with some Ivory Powertex and the colortricx Rich Gold Pigment.
I glued on some gold crotchet material I had in my stash and some plastic silver bling, popped a wire through the hole in the top and secured it in with some hot glue.
Have fun creating your own decorations for Christmas. I know I did! Jinny x

 

Mixed media unicorn sculpture – Powertex – Anna Emelia Howlett

If unicorns could fly

So I was super excited when Tracey told me about the new animal shapes available from Powertex Uk. Especially when she said I could create a unicorn! I was so green with envy when I saw the beautiful unicorns created by everyone at the Powertex Garden Party (limited spaces are available to book for next year!Don’t miss out it was an amazing weekend of relaxing, crafty fun!). I created mine with a little difference. Yes she can fly! The unicorn project pack has been put together by Tracey giving you all you need to create this. If you wish to add wings you will need wire in addition.
Now I’d love to say I also did this bit but I was lucky enough to get a pre-made base from Tracey. As you can see from the photo you need to cover both sides of the mdf base with Powertex. Allow to dry, then use masking tape to adhere to the base.
 Then start wrapping foil around the base from the bottom up around the whole shape and use masking tape to keep in place.
 Paint Powertex over the masking tape to seal it and keep everything in place. We used Bronze.
You can choose to place the wings higher up if you wish. I used a really sharp pointed carving tool to make a hole through the tape, foil and mdf. You could use a bradle if you had one. Just make sure you watch your fingers!
I then thredded some wire through the hole and crossed ti over the back of the body and taped in place. The wire was measured at just over 50cm, you could make them smaller or larger if you wish. Wrap the wire with masking tape and paint with Powertex.
 From approx 1kg of Powertex and 250g Stone art tub I made up some clay. Then gradually added piece by piece. And stamped into the clay as I went. It’s important to stamp the clay as you go because as it drys in the air it becomes harder to make an impression in.
I was lucky enough to have to hand an aray of these fabulous wooden block stamps. I love being at hq, I might move into our Traceys studio soon!
 I covered the whole body on both sides and stamped in different patterns.
I then tool my clay and pushed it into the daisy, pansy and rose moulds. It seems I didn’t take a picture of the placement of these, but they ended up on the horses bottom. You can chose to place them anywhere.
I then coated a handful of Powercotton to create the texture on the mane and tail.
And dipped some paper dec in Powertex and covered the wire wings.
 I allowed everything to thoroughly dry and then dry brushed with some White Powertex. Just to allow the colours to come through brighter when I dry brushed them. But allowing the bronze Powertex to create the shadow for depth.
I used Burgundy powercolor into coral powercolor  on the mane.
 Rich gold colourtricx on the horn and the wings and flowers.
 I sprayed the body with brown bister to take the edge off the white. And added a mix of coral and white and layered up the colour on the body through dry brushing.
Turns out unicorns can fly! Hope you enjoyed this project. Of course if you feel as though you could use some guidance with this type of project just contact your local tutor through the directory to book on and have a go! It really makes a difference having an expert to hand. Toodles Anna xXx Follow me on my Instagram or Facebook if you like what I do.
Don’t forget to share your projects on Powertex Addicts United or The Powertex Studio on Facebook. Keep up to date with the latest at Powertex UK.

Simple but effective

Hello, one and all. Me again, this time sharing with you a couple of easy, fun and elegant projects.
The first piece I want to share with you is the seahorse project pack.

 

Please excuse my  Powertex covered workspace.
( I really need to clean this )

 

 

I opened the pack and looked at all the yummy stash in the pack.
Keeping this project simple was the key and I only used some cardboard and a piece of lace, which was from an old top from my Daughter.
I firstly glued to the two pieces of seahorse together with ivory Powertex both sides and dried it using my faithful old hairdryer.
I then soaked a piece of lace in the ivory Powertex and laid it down on my seahorse and again dried it with my hairdryer, to speed up the process, as I was eager to move on.

 

I found some different lace and thought it would make a good fin shape. I also added the same lace to the top part of the seahorse, after adding some cardboard, as this was my original thought process but decided that the lace effect looked way better.
Now for the best part, the colour transformation. I chose my  POWERCOLOUR and my general idea was to try an do an “ombre” effect but as you will see, sometimes the Powertex has other ideas!
BUT that is the beauty of this product, you can paint it whatever colour you like and if you get bored of it or it does not go with your colour scheme, then you can just change it!
(I really, really, must clean my workspace)

 

I added the yummy bits from the project pack and again glued with Powertex and decided to highlight in the RICH GOLD pigment and also WHITE the two colours of which I do love to highlight.
I titivated a bit more with pigments and varnish until I was happy with how she looked.
So here she is, all done and using just the project pack and a little bit of lace.
I think she turned out rather well myself.
Oh, and I added a small black bead on the eye area. A brilliant project if you are new to Powertex and not much other materials used to create this (I think ) beautiful Seahorse.
Thank you for reading and I hope I have inspired you to get some Powertex and give it a whirl, you won’t be disappointed.
Till next time
Jinny

 

Love using Powertex

So my first official post of the year. Happy new year everyone.
To create this piece I had a large paper mache heart I have had hanging about in my shed. I have recently been playing with glue gun texture, so decided to try this out on a larger piece.
I painted the heart with yummy red Powertex and found some old tablecloth, which is the cross texture, you can see, I then used my new glue gun that Santa brought me and drizzled hot glue randomly around the heart shape.
I had a good old rummage in my stash of metal embellishments and added using the red Powertex as my adhesive, I then added the Love MDF piece and set about bringing this heart to life.
I next sprayed some black Bister over the embellishments to add depth and shadow to my piece.
Next, I did some dry brushing with my favourite Colortricx Rich Gold, to add highlights and make this little beauty pop and pop she did!

I added a gold-tone large hook so it can be hung up.

The photo below is a close up of the glue gun texture, it works so well with Powertex.
I have added some gloss varnish on the MDF heart to give extra pizzaz. Hope I’ve left you inspired I had a ton of fun creating this piece. Ta ta Jinny x

We’ll meet again….

Well, what an amazing response we had from you all at the Birmingham NEC hobbycrafts show. It was so wonderful to share with everyone our love for Powertex!
The team at Powertex Uk hq worked like busy bees and did a grand job of filling packets, labeling, punching, stapling, organising and packing stock in between the normal day jobs. 
Tracey and Garry out did themselves again!! They had a long Wednesday set up, with a 7 am start and they didn’t return home to 6.30 pm. But they certainly brought the blank canvas that was the stand to life. With a beautiful array of new products, samples and jaw dropping, stunning artwork.

The creative team were a buzz with excitement. It’s so lovely for the tutors to get an opportunity to get together and put a face to the name you often speak with on social media. And gives them all the experience of a big show and to share there knowledge and passion too! 

We managed to catch up with some old faces and some brand new ones who had never seen Powertex before.
We had a good lark about with our neighbours, whom included the crew at Hochanda, Craig at Marbling 4 fun and the team at Totally beads to name but a few. Convinced some of them to go pink for Powertex pink sunday. And raised a bit of money for Cancer Research in the process.  Who says you can’t have a bit of fun on the last day!
We crashed out yesterday and had an easy one. Traceys feet were broken, don’t worry not literally, Garry had overdosed on sweeties and my ribs were aching from all the laughter. We always have a good crack at the shows and I think that’s apparent from the atmosphere on the Powertex UK stand. 
We hope you all enjoyed yourselves. We definitely did! Until next time, we’ll meet again. That’s all folks. Toodles Anna xXx 

Jack, Sarah, Powerwax and an important question!

Hello again

Well I bet you were wondering what has been happening with Jack and Sarah?

They took 6 weeks leave in Summer and Jack took her on her own Grand European Tour.  They kissed on the Rialto bridge, climbed every mountain in Austria (!), visited Aphrodite’s rock and ended their tour at Monets garden in Giverney France.  Here inspired by the surroundings, Jack knew he had found his true soul mate and so just had to ask the question……….

He chose a MDF box which had been altered using Powertex Ivory and 3D Flex with bister.

Moulded fish and lily pads had been added and coloured with bister also.

The whole box inside and out was then shaded using the new Powerwax to give beautiful depth and shading.

But what was the question?

 

And what will be her answer?

Until next time have fun in all your creative adventures

Ax

United we stand!

Here’s the thing. So it’s a pretty fair assumption that Powertex has changed my life. I actually find it hard to remember a time when I didn’t have it in my life.

 

So for all those potential addicts I have chatted to at the shows over the years and have told me they bought a kit and still haven’t used it this is for you. Do it, do it, do it!

*clears throat and puts on best mummy voice* (no not the bandaged up, been in a tomb for a couple of years mummy. The ‘you’ve been told’, mummy is always right but you don’t accept it until your 20’s, ok late 30’s)

 

Yes I am giving you permission to make some time for you. No, I don’t want to hear you’re too busy. Do it, do it, do it!!! Yes, it will be ok still.

Give your bottle a shake and crack it open. Can you hear the world full of wonders that awaits you burst out of the bottle. Grab it by the hand, jump in and get creating, invite a friend over, heck get the kids and all the family joining in!

Once you have done this I want to see all those makes over on the Powertex addicts united page on facebook.

And yes, you can do it there is no right or wrong. Just let go….feels good doesn’t it?  Look at all these lovely pictures scattered through this blog. hmmmmm…yummy right?  Do it, do it, do it!

And if you need a little guidance or inspiration booster, cause to be honest Powertex UK hq is my favourite place as I get to pick Tracey’s brain, not quite sure she feels the same, I think I may tire her out lol. Anyhow, I do like to deviate!

Find a tutor in your area if you need guidance because joining our club is the best decision you could EVER make. Welcome to the Powertex addicts family! Toodle pip Anna xXx