Powertex Ghoul Shoulder Accessory

Designer – Donna Mcghie

For this month’s articles the Powertex Design Team were asked to look back over the archives and put our own spin on a previous creation by one of our colleagues. What an inspiration it was going back over past Powertex sculptures and creations.  I was spoilt for choice.  However, the one creation that stopped me in my tracks was the Powertex Halloween Ghoul from October 2018, by the very talented Anna Emelia Howlett, of Rosehart Designs. 

Powertex ghoul for Halloween
A spooky little Powertex Ghoul shoulder buddy for Halloween by Donna Mcghie

I have to admit to have never having watched a Harry Potter film in my life. I was unsure what a dementor was, but I liked the challenge of doing something so outside of my comfort zone.

However, this was not to be an exact copy of Anna’s brilliant design.  My take on it was to create a smaller one, who could be worn on the shoulder to watch over me as Halloween approaches.  Whether he is friend or foe remains to be seen.

“Where there is no imagination there is no horror” So says Sherlock Holmes in Arthur Conan Doyle’s book  A Study in Scarlet.

Anyone who has ever watched a horror film with me will testify that I have a very vivid imagination.  It was still great fun creating this little Powertex dementor though

Materials List

How to make a Powertex Halloween Ghoul

Step 1

Skeleton base for Powertex skull
In Anna’s original she adapted her skull to have an open mouth. Mine was too small to do this.

I  poked some wire in the base of my skull for a neck, and then built shoulders using wire, foil and masking tape.

Step 2

powertex skull base sitting on shoulder
I placed my ghoul on the jacket shoulder to check it fitted

I added on long bony fingers with some extra wire.

Step 3

Powertex ghoul stage 4
I propped him up on a plastic container so I could work on him without it sticking

I painted him in black Powertex and added kitchen roll for texture.

Step 4

Black Powertex adds texture to the halloween ghoul
As well as material I added texture with Paperdec and string

I soaked thin cloth in Black Powertex Fabric Hardener for his cloak.

Step 5

Powertex Skull Head
Scary Face!!

I decided to enlarge his mouth and eyes by making holes with scissors.

Step 6

Final dry brushing of the Powertex ghoul
Dry brushing brings out all that texture

Finishing touches

Once my ghoul had dried I added the final touches of dry brushing, using Anna’s choice of pigments.

Getting it to sit upright on my jacket was a challenge. Initially I had planned to use velcro, but decided I didn’t want his company on a permanent basis, only on spooky nights.

I compromised by using big safety pins. As I had only used thin material I was able to push pins through his cloak, and also hook them over his bony hands. This ensured my ghoul stayed in place and looks over my shoulder as long as I want him to.

Powertex Halloween Ghoul by Donna Mcghie

I hope you have enjoyed my take on Anna’s Powertex ghoul. Any comments you wish to leave would be greatly appreciated. You can see the original ghoul over on Anna’s blog here. We’d love to see your take on a Powertex Ghoul, over on our Facebook page The Powertex Studio.

You can see more of what I get up to over on my website or my facebook page. That’s all from me for this month. Until September take care, keep on creating, and may all your ghouls be friendly ones 🙂

How to create a Powertex Halloween ghoul – Anna Emelia Howlett

Something Wicked this way comes! A Powertex Halloween sculpture.

Some of our family live in Canada and it’s kind of a big thing to decorate your houses and go trick or treating. Every year we get photos of the different outfits chosen and the copious amounts of candy my nieces have collected. We don’t so much celebrate Halloween in our household. However, I do happen to have a Harry Potter inspired room. And this guy is going to fit right in.
He was rather a challenge but here is my ghoul inspired Dementor. And I am about to walk through with you exactly how he was created. So you can make one as a decoration for Halloween or just as a permanent feature to your room.
Suggested Ingredients list: Wire, empty kitchen roll, masking tape, skull head, Black Powertex, cheese cloth or old t-shirt, stockinette, powercotton, white powercolor, silver colortricx, interference blue pigment, varnish.
Step One: I had a spare mini skull in my stash. I cut his teeth out and changed the angel of his jaw. Holding it in place with a long piece of wire. Making a loop at the top I thread the wire through the top of the head holding the jaw in place, leaving a length as his neck. Then attached to a kitchen roll, which I bent into an arch for his shoulders and covered in masking tape. I measured about 60cm of wire to pass through the roll before taping up these would become the base of his arms.
Step two: I used some masking tape to fill in his mouth and around his eye sockets which I made a little larger by cutting out with a scalpel. And started wrapping the arm wire with foil. Using more around the top and bottom end of the section to create a bone looking shape.
Step three: I took 6 lengths of quite long wire. I wanted my ghoul to have long boney fingers. Taping at the base I bent one length done to be able to attach to the arm. The other lengths I trimmed so they mimicked the length of fingers on a hand.

Step four: Then I started covering with masking tape. Adding tin foil at the knuckles and then covering in masking tape. Attach the hands to the end of the wire arm by winding the spare wire at the hands wrist section around the bone arm base. Cover up with masking tape.

Step Five: This is the type of base you want to have created. I covered in Black Powertex and kitchen roll to give the base and extra sinewy finished. But you can skip that part if you like.
Step Six: I draped a piece of cloth over the shoulders to create a base to work up from. An old pair of cheese cloth curtains, but you could use an old t-shirt.
Step Seven: Create a hood with lighter cheese cloth material or t-shirt. Then add stockinette to add depth and texture and then some Powercotton draped over for extra texture.
Drape all the different textures through the boney fingers.
Step Eight: My favourite part. Dry brush using varnish and white powercolor. I then used a touch of silver colortricx in places. And for the hands and the face a touch of interference blue powder pigment from The Secret Art Loft range.

 I love to show how you can make a piece by re-purposing or building your own base. If you don’t wish to create the structure you could always buy a skeleton base instead and decorate that in the same way. I also forgot to add some paper decoration. I love this as texture it would work perfectly for this project. The great thing about Powertex is you can add to it when dry. So I can always go back and add some paper dec at a later date!
Don’t forget to share all your makes with us on Facebook in The Powertex Studio group or on the Powertex Addicts United page.
You can find me at Rosehart Studio on InstagramFacebook and Pinterest. Toodles Anna xXx