I love Powertex!

i love powertex

Powertex, passionately in love ~ Jinny Holt~

What can I say, February is the month for love. I don’t do Valentines but I do love to create and I absolutely LOVE creating with Powertex! I’d even go so far to say I’m kinda obsessed with creating, especially with Powertex involved. It is also fair to say I find being creative a form of therapy. So for this blog, I am going to show you some of my favourite creations and give you a brief description of how I achieved them because I LOVE creating.

I have always been creative from a child and this has never left me, I am lucky enough to create in my full-time job as a Support worker as I am also  their creative coordinator, which means sometimes I get to create and try and pass on my passion of creating to the young adults I work with.

a4 art doll kit powertex
A4 Art Doll Kit

The above creation was made using the newest kit from POWERTEX UK and I loved doing this. I did not stick to my usual pallet which is normally quite dark, so this is a refreshing change for me.

How I created my Art Doll

I used some Easy 3D Flex to create a background with lace and some netting, I dripped Powertex Acrylic paints and pigments down the back panel and used some bister to spray. Then assembled the piece together and added the extra bits to the frame. Next I applied some Stone art to the wings, to give them depth and coloured with the Gold pigment. Then I used some easy 3D to create a paste to go over the wording stencil on the heart. Dry brushed the whole piece with tonal colours and gold. You may have seen this piece on Hochanda.

Powertex frying pan with flower detail

I really could talk about how much I love to Powertex all day, every day!!

This piece above was an old rusty frying pan that I was going to throw out until I had that “light bulb” moment and thought “Ooh I can Powerex it” so I did. I used some of the STOCKINETTE  and an old t-shirt and some crochet material with Bronze Powertex, added some embellishments as a focal point and dry brushed with gold, greens and blues. This piece now resides at my Daughters home as she fell in Love with it.

So another reason for me to LOVE Powertex, you can Powertex anything really, so recycling and upcycling all the way.

See you can use anything, pegs in this piece, to adorn a cheap birdhouse, I hope the photos are self-explanatory!

I think I shall leave this article here for now. I really Love working with Powertex! Did you catch my last article find it here. See you next time Jinny.

You can find all the necessary things at POWERTEXUK

You can find tons of inspiration at THE POWERTEX STUDIO

You can find me on MUMS SHED

Stone Art Clay Powertex Birds

Mixed media Blue Powertex bird Stone Art clay sculptures

Stone Art Clay Birds of Powertex Paradise by Shell North

In December my first Design team blog goodie box arrived! I was so excited!!! I was given the theme of a pair of birds and these are some of the items I received to create something with stone art clay to hopefully inspire others. (eggs, molds and dies are my own)

I did some research for birds in the style of these new MDF bases. I’m usually quite inspired by nature but nothing I found tickled my imagination. So decided to create something whimsical and a little different. Something from my imagination that may represent a bird of paradise. Because sometimes we need thoughts of warmer places of tropical paradise in these colder month in the UK….

thumbnail_20190121_221319

Powertex uk’s favourite product of the month is Stone Art, I decided I was going to use stone art as a clay to cover this piece. I also pulled out my bottle of Blue Powertex liquid art medium. Although I love this colour, I just don’t use it enough! Mixing equal parts of Blue Powertex to stone art powder until I couldn’t stir it anymore. I kneaded it like dough until the stone art granules could not be seen. This was wrapped in cling film and left for a few hours while I prepped everything else.

thumbnail_20190120_191901

First step was to create the bird shape was cut two polystyrene eggs in half long ways and attach them to the breast areas of the MDF bases with masking tape. Molding the 3D shape of the birds with foil and covering in masking tape. Keeping the holes in the MDF bases open for the wire wings by piercing through the eggs with wooden skewers.  Then threading some wire through the bottom holes, I created a wing shape. Inserting the ends of the wires back in through the top holes on both birds, covering in foil and masking tape again. I built up the rest of the birds bodies as before with foil and masking tape.

Now the birds were fully covered in tape I pushed them onto the 2 pin metal base and molded legs for the birds with foil and tape as before to secure them.

The clay I had made earlier was now ready to use, so I warmed it slightly by kneading. I took clumps and rolled it out into sheets about 5mm thick. Wet the underneath with a little water and smoothed onto the birds piece by piece. To blend the areas as one, I again used a little water my finger tips and a small pallet knife. I also made some feather molds from the clay and added to the tail area of the birds.

For the wings I used one of my favorite texture products…. paper decor, available in a variety of colours. Today I used pink because the blue Powertex is quite dark the colour of the paper decor won’t show through. I cut feather shapes out of it and worked blue Powertex liquid hardener into each piece before smoothing on both sides of the wings.

thumbnail_20190121_223100

Next I took Bronze (brown) stone art clay. Made with stone art and bronze brown Powertex art medium from a recent workshop. Rolled a long thin sausage shape and molded the beak shapes smoothing them into place. I covered the legs using stone art clay with my finger tips, a little water and small pallet knife.

thumbnail_20190121_101242

I created a small repetitive feather texture all over the birds body on the still wet clay. By pressing the silicone texture pad against areas I needed texture. I wanted to create webbed feet, using left over wire from the wings I shaped bird feet. And covered in masking tape before paining them black with black Powertex universal medium.

I decided to add wire crests to the birds to give extra interest. By pushing thin wire through the clay and curling them at the ends. I chose some green glass eyes and pushed them into the clay. I decided to be a little quirky with the colour of the legs, as I’m creating whimsical birds. So I painted the legs stripy using licorice twist and clotted cream acrylics.

thumbnail_20190121_175436

I left them to dry for a few hours so the clay would harden a little. So it was now time to bring them to life, by dry brushing with colours. For this I used Powertex powercolor and colortrix powder pigments mixed with easy coat varnish. I used orange and then faded yellow ochre in onto the beaks. I used ultramarine blue, then turquoise mixed with a little white. This makes the turquoise pop on the body and wings. Finishing by lightly dusting rich gold over the body and terra-green on the wings.

thumbnail_20190121_181126.jpg

Well the finished piece can be seen below…..Thanks for reading my first blog as part of the Powertex UK Design team. I hope you all enjoyed what I created this time. Do join me again next month when I’m back with another article.

thumbnail_20190121_210700

Don’t forget all the items used are hyperlinked. Click the highlighted text and it’ll take you straight to items you require, to save you time searching. Please don’t hesitate to comment or ask questions below.

In the mean time why not look through all the new and old blogs. Provided for you by the Powertex UK Design team and guests. You can also find me at The Crafty Little Corner. Send me a message if you would like to do this workshop with me. Or find me on my Facebook page sharing new ideas, hints, tips and a whole lot of Powertex inspiration.

Please spread the love and share this and other blogs.

Peace, love and Paradise ūüėČ

Shell x

A Powertex mixed media project – Heron canvas – Jinny Holt

Tranquillity at sunset

Good morning fellow creative people, my project for January was a pair of MDF birds and they look like Cranes which are very similar to Herons, well I think so, which is a bird I see on a more or less daily basis when I take our dog for a walk by the river, so my cranes have now become herons.

49701109_225105988413800_1671287734695624704_n

I have to confess in my head I was going to do freestanding birds, not dissimilar to a fellow Design team member, so I had to rethink how I was going to bring my birds to life. Then it hit me, why not do them on canvas! So this was my train of thought. I had an old powertex canvas and decided to recycle this as the backdrop for my birds.

49580984_2526828210677053_4624620385453735936_n

 In fact, I already quite liked this canvas as a backdrop and helped me to plan a backdrop for my birds. I then added some extra texture to this canvas, using TRANSPARENT POWERTEX  to help adhere my texture to the canvas.

49344787_280667132612727_2592093422621818880_n

I had a rummage through my stash and found these old split washers and nuts, which I overlayed over pieces of odd scraps of lace and PAPERDECORATION and a little bit of stone art paste which has added more texture to the canvas.

TOP TIP ~ when using paper decoration, spray with water before soaking in Powertex, it will react quicker and thus save creative time ~

49457160_271157443581458_353789311008636928_n

I have also added some little pegs to give the illusion of reeds.

49831323_398316947599499_3766798679231430656_n
I added extra texture on the sun part of the old canvas with stone art clay.
49467920_2204467493109513_5402195115991105536_n

I next painted the whole canvas with a thin layer of Ivory Powertex, just to give it a base for the new colour.

49864934_763425604056154_5110100845525991424_n

I then painted my canvas with pigment colours and the secret art loft paints.

TOP TIP ~ Did you know you can use your pigment colours like watercolours?

I would not use this technique if your project is to go outside, you will need the varnish for this but as my project is a canvas, this is fine.

I stuck with colours that were related to the scene, which I helped by spraying over with a water bottle as I wanted it fairly transparent in colour… DARK BLUE which I absolutely love, brown tones for the reeds and red, orange and pink tones. Now for the magical part, dry brushing … I did the dry brushing next and painted my pair of birds in BLACK POWERTEX and made some stone art clay and added this for texture to the body and neck of the birds.

49348842_279693516043131_5633009596235776000_n

I next concentrated on the wings and made a rough shape of the wings with some wire and then covered them in lace scraps that I found which resembled a feather shape

At this point, I decided to leave it all to dry overnight.

49560121_2191332807848485_3843105645192544256_n

The black sticks are now going to be my bird’s legs as I cut off the ones from the bird template.

49763668_2339036742991204_1964441028131815424_n
49628769_437361593468674_717651102010441728_n

I added some discs to the underside of the birds, so when it was all assembled they would have a height to them.

Once I assembled the birds to the canvas, I then decided to do some dry brushing to showcase all the texture and add some depth to them. I started off with the silver pigment and varnish and then topped it up with white pigment, which added extra highlights to the texture on the wings and bodies.

I took some close up photos so you can see all the yummy texture. I hope that I have inspired you to create with Powertex.

You can find all the materials you need at Powertex UK

You can find me on…

Facebook at MUMS SHED

WordPress at  MumsShed

You can get loads of inspiration from the Powertex addicts on Facebook

Being creative is not a hobby, it’s a way of life!

Thanks for reading

Jinny 

Step by step to techniques used to create a Powertex Box – Donna Mcghie

Hello and a very Happy New Year to everyone.

One of my resolutions for 2019 is to try and catch up with the modern age by getting to grips with videos in my blogs.   As you can also see, my daughter has been very helpful in getting them onto my computer for me, hence the titles of the videos.

What you will need to create your button tin:

Step by Step Instructions and Techniques:

1) As the box I was using was plastic I covered the base section with masking tape and then painted over this with Powertex Hardener so that the material would have something to adhere to.

2) I painted the lid with white gesso

IMG_20181228_171807-01
I painted the lid with white gesso so that my art deco image would show up

3) Once the bottom section was dry enough,  I turned it upside down and proceeded to soak strips of material in the Powertex Fabric Hardener and after squeezing out thoroughly placed them over the base.  At this point I was keeping the material nice and smooth as I laid it on as I wanted a flat bottom for my tin to rest on.

4) I dried this with a hair dryer and once dry enough, turned it over and started to work on my sides.  I wanted more texture on the sides, so scrunched up my fabric and added buttons as well.

IMG_20181229_154032-01
This is  a photo of the side once it has been dry brushed

If you want to you can also do this on the inside of your box.

5) Whilst this was drying off, I started to work on my lid.  I gently tore around the image I wanted to use from the Powertex Art Nouveau Rice Papers.  Then, using a good quality brush I brushed a little of the varnish onto the dried gesso, before carefully placing my image where I wanted it to go.  I then secured this in place by brushing over with a couple of more layers of varnish.  (NB: It is worth using a good quality brush for this as you want the image to be nice and smooth, the Powertex Brushes are perfectly designed for the job).

5) Once my image was in place, I carefully built up a pattern around it.  I wanted the most texture on my lid, so have done a short video to demonstrate how I did this.

6) Once the lid was covered, I added pieces of jewellery from my junk stash.  I also liked the idea of adding a frame, so used a small mdf one, and then, in memory of my nan and her tin, added some more buttons as well.

IMG_20181228_170255-01
I couldn’t resist adding a choker to my lady

7)  I left my box to dry off completely overnight

8) The next day it was time for my favourite part, dry brushing.  I wanted to give the impression of a bronze tin, whilst also subtly incorporating some of the colours on the Art Nouveau image, so I opted to use pigments in Bronze Gold, interference Blue and Interference Red.  Dry brushing is simple once you get used to the technique which is this:

  • Dip your flat brush into a small amount of Powertex Easy Varnish
  • Then dip the same brush into a small amount of whichever Powertex Pigment you have chosen
  • Now wipe the brush off on a sheet of paper towel.¬† This may counter productive, but it really is worth doing as you will get the best results when the brush is quite dry and will only pick out highlights, rather than smothering your design with thick colour.
  • Now you are ready to very gently, sweep your brush over your design.¬† Being sure to keep it flat.¬† You will be amazed at how quickly your design starts to come to life.

My best tip for dry brushing would be to start off gently and gradually build up to the depth of colour you want.

9) I did this over the whole of my tin.

10) And voila!! A rather bog standard plastic chocolate box that was destined to be added to landfill is now a  beautiful button box, in memory of a lovely lady.

IMG_20190102_112733-01
My finished box

I really enjoyed making this, and obviously similar boxes can be transformed in so many different ways – to reflect the personality of whoever you are making it for, or in memory of.

I hope you enjoyed this blog (please excuse the amateur video techniques, I will get better, I promise).  If you create your own version of one of these I would love to see it, and you can post photos on the Powertex Addicts Facebook Page

If you would like to see more about what I do, and why I do it my website page is www.artandmurals.co.uk

January – Product of the month – Stone Art Powder

Turquoise Powertex Stone Art Clay unicorn

Stone Art Powder – Find on the Powertex UK website.

3.jpg

Use Stone Art to make self-hardening clay, coarse and fine structures and stone effects.

Be inspired by more makes over on the Powertex UK Pinterest board.

Our Design Team and guests have shared some of their favourite makes with Stone Art Powder:

sam1.jpg

Sam Butler created these stunning Stone Art clay garden ornaments.sam2.jpg

This cute little chap is a wonderful hare created from Stone Art clay by Annette Smyth. 3.jpg

A wonderful bowl inspired by nature from Shell North.

4.jpg

Stone Art effect used on the side of this vase and on the clay flowers makes this piece a one of a kind treasure by Jill Cullum.5.jpg

Stone Art is just made for texture! Look at this amazing inter galactic work of art by Fi Potter.

3.jpeg

Stone Art can be used to sculpt adorable animals full of character as you can see with these fabulous owls by Donna Mcghie.

1.jpeg

Why not use Stone Art on your magical and practical ideas as Abigail Lagden has done with her works of art below.

0.jpg

2.jpg

Stone art works well as a clay and gives a stone effect will go on mdf bases and will cover Easy Structure and patterned wall paper for extra textural effects as seen on this hare was created by Anna Emelia Howlett.

14

Tracey Evans created this beautiful unicorn to teach as a project for the Powertex Garden Party and her portfolio workshops. Stamping into Stone art clay is another effective technique to create lots of detail in your work.

Portfolio Unicorn copy (1).png

Kore Sage brings us a piece of practical art with this stunning brush pot holder. With Powertex the possibilities really are endless.

StoneArtVase

We hope you have been inspired to get the Stone Art out and have a go! Do share your makes with us over in the Powertex Studio. See you next month with more Inspiration!

Top Ten Tips for a Powertex Christmas – Annette Smyth

Hello Everyone

I don’t know about you but I just love this time of year. ¬†I have Christmas movies and music playing in the background from the beginning of November!!

So in the spirit of the season, ¬†I wanted to share some ideas with you on how to get a wintery festive feel into your projects. ¬†So here are my top ten tips for Christmas crafting along with some festive musical titles (how many can you recognise?)………..

1. LET IT¬†SNOW, LET IT SNOW, LET IT SNOW………

bKbHH%GzQUKlznYCVKHl+A

In my opinion you can never have enough snow!

Mix small 3D Balls and 3D Sand into White Powertex to get a textured snow effect. Experiment with different amounts of each until you get the consistency you need for your project.

Dry brushing with Powerpearl pigment makes the snow glisten.

2. ¬†OH CHRISTMAS TREE, OH CHRISTMAS TREE ………

fullsizeoutput_15aa.jpegIcelandic/Reindeer moss coated in Transparent Powertex makes a lovely textured Christmas tree.  Be sure you give it enough time to dry РI left mine overnight, be careful if you use a hairdryer to speed up the process as you can burn the moss.

Here I have used moss that has been dyed bright green. The Powertex makes the dye bleed very slightly, so be aware of that when placing onto your project.

As the Powertex dried and became stickier,  I used a skewer to push the tree into shape.

3. (Christmas) PRETTY LIGHTS ON THE TREE……..

fullsizeoutput_15cd

Coat the large 3D Balls in Powertex and then dry brush with the pigments of your choice to make beautiful Christmas lights. To get a real shine coat with Easycoat Glossy. 

These can then be placed onto your tree and for a stringed light effect use Powercotton coated in transparent Powertex to connect the lights together.

4. DECORATIONS OF RED ON A GREEN CHRISTMAS TREE……

fullsizeoutput_1603

Well actually the decorations can be any colour you like.

Use Stoneart clay and your favourite silicon moulds to create decorations for your tree. Attach to your project using Transparent Powertex .

Watch the video in the Penguin blog to see how to make Stoneart clay.

Dry brush with pigments to complement your chosen colour scheme

5. MERRY CHRISTMAS MR BUBLE……

fullsizeoutput_15bb

Ok so I cheated on this title as I couldn’t think of any song with baubles in it……but you can’t have Christmas without a bit of Mr Buble.

Take a ball of Stoneart clay, insert a loop of cotton then coat with Easy Varnish.

Dip into glitter for a sparkly look or coat with your snow mix to look like a snowball.

6. WITH AN EVERGREEN WREATH ON A RED FRONT DOOR……..

4O2GKWnNS9eUvwBX+SZRlA

You can make a great Christmas wreath by using a mdf cog.  Coat with a layer of Powertex Green.  Dip strips of Paperdec into the Powertex and lay around the cog in a circular shape.

Dry brush with Colortricx Terragreen pigment and sprinkle on a little snow to finish your wreath.

7. DECK THE HALLS WITH BOUGHS OF HOLLY…………

fullsizeoutput_15d8

Use your Stoneart clay with any cutters you have to create embellishments. ¬†Here I’ve used a sugarcraft holly leaf cutter with green clay. ¬†Remember to keep these cutters for non food use only.

The holly berries are 3d Balls dipped  in Powertex and drybrushed with red pigment then coated with Easycoat Glossy.

8. WITH THOSE HOLIDAY GREETINGS AND GAY HAPPY MEETINGS……

fullsizeoutput_15e9

You can add any greetings you like into your project by using the mdf letters .

I coated mine in the base colour then placed them onto my project.  Using white Powertex I then painted over the top to make them stand out.

9. THE PRETTIEST PICTURE YOU’VE EVER SEEN IS CHRISTMAS IN KILLARNEY……

aYfLwRnhS9Oa+Yyg5ii4pw

You can add a focal point into your project by using the Powertex rice papers.  

Select the image you want to use and draw around it (leaving a small margin) using a wet paintbrush.  Now gently pull away the excess paper keeping your hand on the image, this way if you tear by mistake it will be the waste that you rip into and not your picture.

Attach to your project using Easycoat Matt.

10. RAISE A CUP OF CHRISTMAS CHEER………..

close up of beer glass against black background
After all your hardwork treat yourself to a little of what you like
Merry Christmas and Happy Creative Adventures…..see you all in the New Year
Axx

Powertex Christmas ornament

It’s beginning to feel a lot like Christmas

IMG_20181129_155613.jpg

Create a Powertex Christmas ornament

I always joke in January, it will be Christmas soon. Well this is no joke we are knocking on the door of December and it will be Christmas soon! I love me a bit of Christmas, don’t you? Not all the buying presents kind. Most get hand made from me anyway. But the smells of cinnamon, orange and clove, decorating the house and being with the family. Without further ado I am going to explain how to make your own Powertex Christmas ornament.

Powertex Christmas pud

powertex christmas ornament

I remember when we were little we would get out all the Christmas cards from previous years. We would cut around the pictures with pinking shears to make Christmas tags for all the presents. Then out came the felt! We’d glue and sew little stockings and baubles with openings at the back for the chocolate coins to hide in. I’m unsure the chocolate survived until Christmas day though.

powertex christmas ornament

I hope you find inspiration for crafting with the young people in your life or just for yourself. Making Christmas decorations has come a long way. Especially when you have a bottle of Powertex to hand.

I found some plastic baubles in my stash. But you could use Styrofoam balls or up cycle an old bauble. Stone art seems to just fit this time of year perfectly.

I wrapped masking tape flush with the bauble, then used bronze Powertex  liberally over the surface. Next I gently rubbed and layered Stone Art into the surface in order to build texture. And dry brushed with red ocher powercolor.

Then I made up some stone art clay and rolled out roughly. Laid this over the top of the bauble so it would sit unevenly. I dry brushed with titanium white powercolor. Then hand cut some holly leaves out of clay and stamped into them to give them a pattern. Rolled a little clay for the berry and used Powertex on the back to stick down.

Then dusted the whole pudding with some of my favourite in the Secret Art loft range Limoncello Gold. And a dash of Lipstick fizz on the berry for an extra sparkle.

Powertex Reindeer

20181129_153519.jpg

Then I thought it would be rather fun to make ruddolf! Create in exactly the same way but with added clay antlers and nose. I used stockinette on the ears and buttons for the eyes. Then dry brushed with the same colours.

Powertex Robin

20181129_153419.jpgNext I decided it wouldn’t be right to miss out a robin and so created this little guy in the same way but just used some paper dec for the wings.

20181129_153413.jpg

Do put some creative time aside this Christmas and be inspired to create some Christmas decorations for yourself. Do join us over in the Powertex Studio and share your work. We are a lovely friendly bunch and helpful too. So if you are stuck on a project just pop in and someone will be able to help. More from me here.

Happy holidays. Toodles Anna xXx Catch me over on Facebook at Rosehart Studio.

Tutors Halloween Challenge

Well, Halloween came and went ever so quickly. It seems the days are flying past quicker than I can get all my jobs done. But I haven’t forgotten about our tutor challenge. So without further a do here are the pictures of the tutors ideas for Halloween.

The team at Powertex UK Hq thought they were all fantastic but there can be only one winner…
It was a tough decision to make…
As you can see the range of ideas was superb.
¬†But we went with this little guy…
Well done to Rachel Angela Pullen. Who will be winning a bottle of her favourite colour Powertex. Toodle pip Anna xXx