Craft foam – Made for altering

by Annette Smyth

Hello everyone

By the time you are reading this the Yuletide season should be in full swing. I’m sure, by now, you will be ready for a little escapism with your crafty stash.

Powertex Picasso art by Annette Smyth
Powertex art by Annette Smyth

Did you manage to catch Tracey Evans on Hochanda on Thursday 21st November? If not click here to watch her on Rewind.

Tracey introduced a crafting foam substrate which works beautifully with all of the Powertex product range. Available on the Powertex website in 2 sizes – 30cm x 30cm or 15cm x 15cm both 5cm deep.

Altering craft foam

This craft foam base is crying out to be altered. Using files, rasps, old carving knives, scissors and other mark making tools, you can change the shape anyway you choose. I also tried using a hot wire cutter (designed for home use). However the density of the foam made this a more difficult option.

Keep all of the bits that fall off. Mix this into your Powertex later and reapply to the base to give even more texture.

Here are a few examples of how you could use the foam …..

Powertex craft foam art clock by Annette Smyth

Example one

Here the foam would be fashioned into a more circular shape before using the files etc to breakdown the edges to give a more worn stone effect. This piece has bronze Powertex Universal Medium, Stone Art, Yellow, green and brown Bister and is finished with matt and metallic pigments and Easy Varnish. The flourish and clock face are MDF and are available here.

Powertex craft foam clock by Annette Smyth

Example two

In this sample I drew out the shape I wanted onto scrap paper then used this as a template to draw around on the craft foam before cutting. I used white Powertex Universal Medium and Stone Art for the base and Stone Art clay in the Bee trio, Queen Bee and Ivy leaf moulds. The piece was then sprayed with yellow, brown and green Bister before being finished with pigments and Easy varnish.

Powertex craft foam Picasso art by Annette Smyth

Example three

In this piece, based on Picasso’s work, I again drew out a template on paper before transferring it to the foam and cutting. Use 2 pieces of 30cm x 30cm foam pieces for the elongated style.

This piece was achieved by using an extensive range of techniques and colourings across the full Powertex product range. Using White Powertex Universal Medium and the Acrylic Ink Sprays gives you a more vibrant colour scheme to work with.

Well that’s all for this year folks. I hope you have a Happy Yuletide season and look forward to creating with you again next year.

Until then please post any of your makes into the Powertex Studio group on Facebook. If you would like details of my workshops please visit my website here. Read more about my Picasso inspired art in this article.

Happy Creative Adventures

Annette xx

Upcycled Powertex pot

Designed by – Anna Emelia Howlett

Upcycled Powertex Pot by Anna Howlett

If you saw my shows with Powertex UK on HOCHANDA on May 3rd at 12pm and 4pm you would have caught my water pot. Made from my mum’s giant yoghurt pot I felt it was only fair to gift it to her. I hope you felt inspired to make your own upcycled powertex pot. Here are some tips and a materials list for how I made mine.

Materials

Stone art clay ammonite fossils
All pearl pigments from the party pearls pigment tray were used on the fossils to make them pop.

What to use to create an upcycled Powertex pot

Don’t forget Powertex can do many things. It acts like a primer, glue and paint. It will harden most fabrics and textiles. If you would like them to be water resistant you need to use fibres with at least 80% cotton in them, then cure for 3 weeks. For my upcycled Powertex pot I used black Powertex fabric hardener on different fabrics and textiles to cover the pot. Coated the mdf starfish with a mixture of black Powertex, 3d sand and balls. I created some stone art clay, pressed into the new super cute fossil moulds and stuck down with Powertex.

Dry brushing with White Powertex
Dry brush white Powertex on the black Powertex to pick out the detail.

How to make your pearl pigments pop

Leave your black base layer to harden by leaving to dry, either in the air or with a hair dryer. Then use the new White Powertex to dry brush over the top because this helps to bring out all the texture in the materials. It also gives a base for your colours to lie on top of. The pearl pigments are translucent and this technique allows them to show up and pop on a black base. This is because you’ve put the white layer down over the black.

Using pearl pigments to highlight
Pearl pigments

Share your upcycled Powertex pot with us

These make super water pots or plant pots. Why not give it a go! And don’t forget to share your makes in The Powertex studio, I love knowing I’ve inspired you to create your own works of art. Please leave a me a note in the comments if you have found this article useful. You can find me at Rosehart Studio. You might also be interested in my mixed media canvas project. Toodles Anna xXx

Upcycled Powertex Pot by Anna Howlett

So what do you do with your spare Powertex??

Hello there

I hope you are well and have enjoyed this lovely Summer.

So here’s the question……..

What do you create with the spare Powertex left in your tub?

You know that little bit you have left when you’ve been slightly too generous with yourself when you’ve been pouring out….

Here are a few of the things I use it for.

1. Coat a spare piece of fabric and a plaster embellishment and create a brooch.

These can either be coloured or left as the base colour so that you can colour them to fit into your future project.

2. Coat a spare piece of fabric, scrunch it up and let it dry.  You now have somewhere to try out your dry brushing colours before going onto a finished piece.  This is great if you want to try something a little different to your normal colour choices.

3. Take a strip of fabric, coat it with the Powertex and roll it into a flower.  Once dry these can be added into a future project.  Again these can be dry brushed at a later date to fit in with your project.

4. Mix it with Stone Art and create a clay,  double wrap this in clingfilm and store in a sealable bag or box and this will last for several weeks.  Alternatively sculpt it into a freeform shape or use it in the moulds to create embellishments.  Again these can be kept until you need them.

 

5. Create a Powertex mask.
Either let the Powertex set in the container or pour it out onto a non stick mat creating a more controlled design.  Leave to set then peel off.


These can be added into projects to give even more layers and textures.

Here the Powertex was left in a round tub and gave a lovely curved effect to sit the skull into.

6.  Take some of your MDF embellishments, coat them with Powertex and apply Rusty Powder, spray with vinegar mix and leave to dry.  You then have ready rusted embellishments at your disposal


I bet you have other ways of using your Powertex,  why not hop onto the Powertex Studio facebook page and share your ideas with everyone.

Until next time happy Creative Adventures

Annette  x