Simple step by step to a cute Powertex Penguin

For this month’s Powertex Blog we were given the theme of winter crafting.

As we are getting towards the end of the year, and I have obviously got lots of lovely new Powertex goodies on my Christmas list (and I have been a fairly good girl) I thought it was a good opportunity to also use up some spare bits I had from previously in the year.

Meet Quentin

Quentin (made using bronze powertex)

Priscilla

Priscilla (made using grey powertex)

and Paulio

Paulio (made using black powertex)

What I used:
Small amount of Powertex Stone Art 
Small amount of Powertex Fabric Hardener
Powertex Colour Pigments
Small amount of Powertex Easy Varnish
Small scraps of fabric
Small Polystyrene Eggs

How I made my Powertex Penguins:

I had a few small polystyrene Easter eggs left over from Easter crafting workshops and projects, and when I looked at these, the image of a cute little penguin appeared in my mind.

Having just finished a unicorn workshop I had a small amount of stone art clay left over, (which was made using bronze powertex) which was just perfect for covering the egg to create a penguin shape.

I had my stone art clay already mixed left over from my previous workshop (if kept in an airtight container it will last for quite some time once mixed up).  But if you are mixing it fresh it is very easy to do (it always reminds me of making pastry)

Simply pour a small amount of your hardener into a tub, and gradually add stone art, little by little, mixing with a pallet knife until a dough like subtance forms.  Roll it into a ball, and keep kneading and rolling until it comes away cleanly from your hands.

I made up three small balls, as I find it easier to work in this way

mix up small balls of stone art clay using Powertex Fabric Hardener and stone art

From here I simply rolled small bits out and covered my egg shape with the clay. I like to create textures in the clay so I used a small stamp to do this as I went.  Be sure to make the base of the egg quite flat so that your penguin is able to stand steadily.

I rolled a smaller ball to create a head shape, then added small rolls flattened out to indicate the wings, and molded a beak which I added to the head.  For eyes you can use any small round beads.  I was making it up as I went along, and had some Powertex sand balls handy so used these, painted black which worked just as well.

Starting to look vaguely penguinesque

It is when you add the colour that the penguins start to come to life.  I used black, white, tequila sunrise and silver, but basically you can use any colour that takes your fancy.  These are fantasy penquins, so use your imagination.

I was quite pleased with Quentin, but something was missing.  My daughter had the solution.  ‘He needs a little scarf’ she told me, and she was right, he did.  So I simply cut up an old scarf from my stash of material, soaked in transparent powertex and wrapped it round him to keep him nice and snug.  The final touch, and purely optional was some frosty glitter.

I was so pleased with him, and with how easy it was to make, that I made up some more stone art clay using some black powertex that had been lingering in the bottom of a bottle, and also some grey and made him a mum and a dad, so now I have my own cute little Powertex Penguin Family

Quentin, Priscilla and Paulio – keeping as snug as possible against that cold wind

These were genuinely quick and easy to make – and a great way to use up any last bits of stone art clay or powertex that you have lying around.

If you decide to make a Powertex Penguin we would love to see your photos over at the facebook page  Powertex Addicts United

You can see more of my makes on my website www.artandmurals.co.ukwww.artandmurals.co.uk 

Penguins – Mini Makes for you and the little ones

Hi Everyone

Well we’re at that time of year again where time just flies by and everything you wanted to get done somehow doesn’t.  So I thought I’d show you a nice easy make that you can do on your own, with friends and with the little ones.

We are going to make penguins and I have to admit they are a little addictive so you may well end up with your own little waddle  – that’s one name for a group of penguins on land, they can also be called a colony or a rookery whereas when they are in water they are called a raft (thanks Google!!).

So lets waddle away and get creating…….

You will need

Powertex Black (approx 75ml)
Powertex Stone Art (approx 20g)
6cm Polystyrene egg
2-3 cm Polystyrene egg
2 x 2-3mm animal eyes
Cocktail Stick
Masking Tape
Plastic container to mix clay in
Brush
Pigments (I opted for orange, white and yellow ochre)
Apron
Disposable Gloves
Optional – Pokey tool
Start by covering your work area with a protective layer.  This could be an waterproof tablecloth, oil cloth or even newspaper.
Break the cocktail stick in 2.  Using one piece connect the 2 eggs together to form a body and head
Place the head at an angle for a more realistic look
Using the masking tape cover the whole shape ensuring that the the transition from the head to the body forms a neck. Place the other piece of cocktail stick on the small egg where the beak will be.  Now coat with a layer of Black Powertex and set aside.
Place approximately 75 ml of Black Powertex into a suitable container (you are going to be mixing this so make sure the sides are high enough) and begin adding the Stone Art, using the non bristle end of your paintbrush begin to stir the mixture.  Add the Stone Art slowly and mix well between each addition.  Keep going until the mixture pulls away from the sides.  Now go in with your gloved hands and knead the mixture bringing together into a firmer clay consistency.  Keep adding more stone art until the clay doesn’t stick to your gloves and there are no white flecks showing.  Make sure you pull the clay apart to check that there are no white flecks inside.
Make sure that the clay isn’t too dry otherwise you will have difficulty covering your penguin. If it is just dip it in a small amount of Powertex and knead it thoroughly.
You can now use the clay or double wrap it in cling film for use later.  So long as you keep it airtight the clay will be useable for several weeks.  This is a bonus as you can make the clay ahead of time and have fun sculpting it later with the children.

 

Take approximately 2/3rds of the clay and roll it into a ball then flatten it into a disc approximately 1/2 cm thick.
Lay it over the beak and onto the head, then using your fingers push it down onto the body thinning it as you go.  Make sure it meets underneath to form a base.  Stand the penguin on your work surface and give it a little wiggle to make sure it will sit without toppling.  If it doesn’t sit properly use a little of the remaining clay to make some feet and/or a tail to support it.
                                      
With the remaining 1/3 clay split it into 2 and form rolls.  Flatten them to around 2mm and shape to form wings.  Attach to the body on the sides.  If your clay has dried, paint on some fresh powertex to stick the wings to. Shape the wings to give your penguin character.
Now make any final adjustments, make sure the beak is a nice shape and push the eyes through the clay into the underlying egg.  You may need to use a pokey tool to make the hole first.
Using the Easy Varnish and pigments dry brush on the colour to complete your penguin.  I opted to colour mine in different ways to make a real mixed waddle.

 

 

Don’t forget, you can always scale it up by using larger eggs to make bigger penguins just remember to increase the amount of clay you make.
I hope you’ve enjoyed this project and look forward to seeing your makes.  Don’t forget to post photos of them over on the Powertex Studio facebook page
Until next time happy creative adventures