Mosaic Madness

Designer – Annette Smyth

Hello Everyone, this month’s theme of Ancient Rome has got me really excited.

Why I hear you ask?…….Well, my Dad was born in the village of North Leigh in Oxfordshire.  It is here that the remains of one of the largest Roman villas can be found.  At its height, around the early 4th century it had 4 bath suites, 16 mosaic floors and 11 rooms with underfloor heating.  I expect the inhabitants found our climate a little cool!  

Mosaic madness

It was the mosaic floors that really grabbed my imagination and so I did a bit more digging into their symbolic meaning.  I found that homes often had a mosaic with medusa in. This was considered a lucky talisman as  it was thought to ward off evil,  as her stare would turn the viewer to stone.

Powertex Mosaic Madness by Annette Smyth

I immediately thought of using stone art to create the tiles and rather than Medusa I chose to use the Green man plaster , a more gentle image. The piece needed to be rustic and aged so bister was the perfect choice and having missing and misplaced tiles around the edge also gives it a timeworn feel.

If you would like to read more about the history of the villa please click here.

Materials List

Mdf circle or old hardboard place mat – mine was 28cm wide
Ivory Powertex Universal Medium
Stone Art
Green Man Plaster face
Brown Bister
Colortricx pigments – Red Ochre, Yellow Ochre, White, Mocha, Ultramarine blue
Easy Varnish
Powerwax (can be replaced with Stone Art see step 12)

You will also need
Non stick rolling pin
2 pieces of wood to be used as guides for rolling out your clay in step 2 – mine were just under 1cm thick 

1 Make Stone Art clay

Make the Stone Art clay by mixing the Ivory Powertex with the Stone Art.

2 Roll out the clay

Using the wooden guides, roll out the clay on a non stick surface.

Using guides allows you to roll to the same depth each time.

Texture added with sponge

3 Adding texture

Using a texture sponge, press into the clay to create texture then cut up into 1cm squares with scissors.

4 Dry enough tiles

Place these tiles to one side to start to dry.  I used 122 on my piece.

Designer tip – make spare tiles to test dry brushing colours on later.

5 Paint the base

Paint both sides of your base with Ivory Powertex and dry.

Place the plaster face on the base and roughly draw around it.

6 Make up your “grout”

Make up a paste of Stone Art powder and Ivory Powertex.  Think of this as your grout.

7 Attach the plaster face

Place some paste inside the line for your plaster face, paint the back of the plaster with Ivory Powertex and then place onto the base.

8 Place your tiles

Spread out more of paste, in a thickish layer, around the face and start placing your tiles in your chosen pattern.  

Mosaic sprayed with Bister

9 Spray with Bister

Spray with a light misting of brown bister and leave to dry overnight.

10 Add colour to the face

With a damp sponge, remove excess bister.

Using the Red and Yellow Ochre pigments mixed with Easy Varnish colour the plaster face.

Add Ultramarine Blue to the eyes.

Dry brushing the tiles

11 Colour the tiles

Using the Red Ochre, Yellow Ochre and Mocha pigments with Easy Varnish I coloured the outside 2 circles of tiles.

12 Colour the grout

Using Powerwax mixed with Yellow Ochre I created a paste to fill in the gaps between the tiles and up to the plaster.  Remove excess with a damp sponge.

Allow to dry overnight and polish with a soft cloth.

Top tip

Why not try using the Stone Art paste mixed with Yellow Ochre if you don’t have any Powerwax.

I have really enjoyed creating this piece and can see so many more projects that would work well with this technique. How about making your own plaque with your house number on?

I would love to know what you create following this article. Why not share your creations on the Powertex Studio Facebook group.

If you would like to see more inspiration ideas why not have a look at my previous article or join me for a workshop at my home studio.

Until next time, Happy Creative Adventures………Axx

Powertex dreams

Designer – Jinny Holt

Powertex dreams. Hello again fellow Powertex creatives, for this months article my theme was ” dreamers and stars” well I have a dream…

If you have a dream, just go for it

I have been creative for what feels like forever and I have always wanted to give up my day job and be an artist full time. So a few years ago I set myself a five year plan and as of now I am less than two years away from reaching my end goal. In fact it is one year and 11 months, not that I am counting! I am now in the process of building up local contacts and have started doing workshops once a month. I’m teaching myself better photography skills, learning how to be more technical savvy (not my strong point) and be confident in myself.

So as I do love to create I decided to make myself a journal, to document my thoughts, feelings and design ideas.

If you have not yet got any Powertex in your life, then head on over HERE to see all the goodies that are on offer.

My design for my journal

How it ended up

So, I say to you..

If you have a dream or strong desire to go and do something, just go and do it. If it takes you months or even years like myself, make plans for what you want to do. Life really is to short and you may end up saying, I wish I had done that or this. I am well on my way to achieving what I want to do and while I am doing that I am always honing in, on the best that I can be.

Powertex dreams

So I hope myself and the rest of the design team here are always inspiring you to reach for your dreams. If you would like more Powertex inspiration, you can find loads of eye candy on…

PINTEREST

THE POWERTEX STUDIO

POWERTEX ADDICTS

And you can find me at MUMS SHED or look at my last blog where I created an ocean sculpture.

I look forward to seeing you creations. It would be lovely if you could leave a comment and maybe even share but most of all be inspired and have fun creating.

~LIVE~LOVE~LAUGH~CREATE~

Jinny

Powertex Ammonite Light

Powertex Ammonite Light

Designer:  Jill Cullum

My Inspiration for an under the sea light

This article is very much influenced by my love of the beach. I spent several years with the beach on my doorstep, where I regularly enjoyed early morning walks. And was the inspiration for my Powertex Ammonite Light.

I particularly loved the changing moods of the sea, the smells and a chance to blow away the cobwebs.  I’ve chosen fabrics and materials which resemble netting and rocks. Paper deco works very well here.

I have also used some shells which I have added extra colour to. You can always leave these natural though.  The Powertex stand gave the finished piece some weight, as well as structure and height.

TOP TIP – Have a hair-dryer ready when adding the Ammonites. You will need them to stay in place so that they have space to poke the lights through. This also gives more 3 dimension to your piece.

Materials Used

I chose my materials, cardboard, and embellishments from my stash which included sea shells. I have used sand and 3d ball to create a thick texture for my ammonites, giving them an authentic look.

Building the basic form for the Powertex Ammonite Light

Step 1

Using the stand a base add tin foil to create rocks and shape, covering with masking tape.

Adding detail

Powertex Ammonite Light
Step 2

Step 2 – Added more texture using some honeycomb effect cardboard packaging. Hold in place with masking tape. Cover with fabric hardener. Creating texture for the ammonites.

Creating texture for the ammonites

Step 3

Mix black fabric hardener with sand and small 3d balls. Use this to cover the mdf ammonites. Put to one side until dry.

Bringing the ammonites to life

Powertex Ammonite Light
Step 4




Step 4 – Once dry use Secret Art Loft pigments to colour the ammonites, using the dry-brushing technique.. 

Building more structure

Step 5

Add height and detail using material dipped in green fabric hardener. Blend it over the ‘rocks’ adding height to your form.

Putting the elements together

Powertex Ammonite Light
Step 6

Before the fabric dries, add your ammonites (see top tip above). Add paper deco placed over the ammonites, using blue fabric hardener, for extra detail.

Powertex Ammonite Light

Finishing Touches

I decided to add colour to the sea-shells using Secret Art Loft acrylic paints, before dry-brushing to bring out the texture. Finally I added the fairy lights.

Why not take a look at my last article here, on how to create pastel shades with fabric hardener.

We love to see what you make, so please share your creativity here, at The Powertex Studio.

I hope you have enjoyed this article and that it inspires you to create your own nightlight. A garden theme using wings and flower embellishments would work well too. Looking forward to seeing your own take on how to use fairy lights, bye for now, Jill x


Powertex Inspiration

Tree bark

Where do you find Powertex inspiration?

by Annette Smyth

Do you find that sometimes your head can be so full of ideas that you have trouble choosing which one to start first. Then there are those times when you just cannot get going no matter what and it is easy to sit in that void. Just think how much more fun it would be to have creative adventures again. Let me show you how to find some Powertex inspiration.

So how do you find inspiration ??

I always find that getting out into nature kick starts my creative flow.

Walking across the local fields not only makes me feel better physically but it also clears my head of all the “shoulds” that are going on in there.  You know the ones……I should be doing the housework, I should tackle that pile of ironing. It also makes space for ideas to take shape again.

Taking photographs of interesting textures often makes me think of new projects. I work out if I could utilise fabric or clay to recreate the texture.

Here are a few of my recent photographs and the ideas that initially came from them

cormorant

1. Terry the Cormorant. He has recently taken up residence in the tree at the bottom of the garden. He’s just a sculpture waiting to happen

Buds and blossoms - powertex inspiration

2. Buds and blossoms. The colours in nature encourage me to step away from my trusted favourites and try new colour ways.

Tree bark - powertex inspiration

3.Tree bark. Crying out to be recreated in Stone Art clay and Easy3D Flex. See my previous blog on mixing stone art clay.

Landscapes

4.Landscapes. These help me to get balance in canvas work. I study what about the image makes it pleasing to me.

Trees - powertex inspiration

5. Trees. These make me want to trail Powertex on a canvas to recreate the tree. I would then build up a mixed media piece on top 

Inspiration from children

6 Izzy – OK, I didn’t find her in the fields but she does inspire me. Her enthusiasm is infectious and the way she works without any thought for right or wrong makes me look at things differently

These photos will sit in my inspiration folder until the time is right for them to be used in a creation.

So how do you find inspiration?  

Why not comment on this blog or leave a photo of one of your inspired makes on the Powertex Studio facebook page.

Until next time, happy creative adventures and don’t forget you can find me and my workshops at www.annettesmyth.co.uk

Axx

The Secret Art Box – February

The Secret Art box, Powertex, love projects

This months article brings you inspiration and projects to create using February’s The Secret Art Box. The new craft subscription box from Powertex UK.

“The love of my life opened my heart the warmth it let loose poured into my art” by Claire Ivins

*** You may not get an exact replica of this box, but similar items will be included ***

Powertex Secret Art Box Project One

I also gathered a few more supplies, wire, paper tape, tinfoil and a larger mdf heart shape.

I used the mdf heart shape to mould another from wire.

I used tinfoil to pad it out and create the shape I wanted.

Next came the making of the arrow. This is a thicker wire as I wanted it strong and sturdy.

I covered everything in masking tape.

Then I started to play around with some of the contents in the box.

I wanted to make a recess in the polystyrene heart for the plaster heart to sit in, so I drew round it.

And using a craft knife and a small pair of scissors, I dug out the shape.

I placed the plaster heart in the hole to try it for size.

 I painted it with a coat of red Powertex. Whilst still wet I pressed Stone Art powder onto it and rubbed it in, letting the excess fall off. The Stone Art creates a stone like effect.

Then I sprayed it with red Bister. This red is more of a mahogany colour, ie a deep red.

The Secret Art box powertex

I painted the heart and arrow shapes with the red Powertex and stuck the arrow on with it too. I cut out some of the polystyrene heart so it sat on the frame. I added the gold sequins from the January box. And also used rich gold pigment from my stash over some of the heart shaped frame.

And to finish I mounted it on one of the Powertex metal stands.

      

Some more close ups.

Powertex Project Two

I did the same for my next project and started off by creating a layout. This time I wanted to show different shades of red and different textures.

I sprayed the plaster cherub with the red Bister.

I used the red ochre and varnish to create a paste and painted the wings, and did the same with the rich gold on the hair.

I painted the large heart from my stash, and from the Secret Art box, the set of four hearts (including the one out of the middle of the biggest one), the smaller starburst shape, mini hearts and the wooden love word, all in the red Powertex.

This one I added strands of Power Cotton to the wet Powertex, painted over it and added the key whilst still wet. Once dried, I dry brushed with green olive pigment, which if you were lucky enough, was in the January subs box.

This one I sprinkled some of the small Powertex sand balls into the wet Powertex and dry brushed with rich gold pigment.

And for this one I added pieces of tissue to create some texture and to dry brush I mixed some of the blueberry pie with the red velvet acrylic paint and a touch of lipstick fizz pigment (for the shimmer) to create a deep purply colour.

The Secret Art box Powertex

Next I layered everything up and put it all together. I used the Powertex as a glue once I was happy with the placement.

           

Some more close ups.

For my next project I wanted to section off parts of the sheet of rice paper included in the box.

Instead of cutting it, I like to get a rough edge as I find it blends in better and isn’t such a harsh line. If you take a wet paintbrush and mark out where you want to tear, if it’s wet enough it should just pull apart. If it rips then the paper isn’t wet enough.

It should just pull apart and creates a lovely edge.

This is what I ended up with. Don’t you think they look much nicer than straight cut edges.

I also cut a piece to size and fitted it inside one of the metal embellishments I got in my box.

Then I completely filled it with transparent Powertex and left it for several days to dry. It is cloudy when a liquid, but dries clear.

I wanted to create a pink colour to combine with the images, so I mixed red and white Powertex until I achieved the colour I wanted.

I found a suitable glass bottle and completely painted it with my new hot pink colour and left it to totally dry before the next step.

Using transparent Powertex I glued on the pieces I’d torn out. I smoothed them out and also added a layer over the top. Now this looks really messy and you might think, oh no, what have I done. But, don’t panic, stick with it, the transparent goes on cloudy, but dries brilliantly clear. I also added some of the fancy yarn I had left from my Bluebird (January) box around the top.

And this is what I ended up with once it was all dry.

The Secret Art box Powertex

I added some chain and a couple of metal charms, the hand and heart from the box. The transparent Powertex has now completely dried that I put in the heart shape, so it has now sealed the image.

And a decorated bottle makes a great candle holder. Should you wish to light the candle the dripping wax won’t be a problem when it meets the Powertex. However, don’t let a naked flame come into contact with any fabric, as Powertex is not a flame retardant. As with all naked flames, do not leave it unattended, we won’t be held responsible for your house burning down!!

The Secret Art Box Powertex

All three makes together.

I hope that you have gained some inspiration for your own, The Secret Art box, Powertex craft subscription box. I can’t wait to see what you do with it. Don’t forget to share your makes on the Powertex Studio Facebook page as we love to see what you’ve been up to.

Did you catch my article last month find it here. Thanks for stopping by Sam

Penguins – Mini Makes for you and the little ones

Hi Everyone

Well we’re at that time of year again where time just flies by and everything you wanted to get done somehow doesn’t.  So I thought I’d show you a nice easy make that you can do on your own, with friends and with the little ones.

We are going to make penguins and I have to admit they are a little addictive so you may well end up with your own little waddle  – that’s one name for a group of penguins on land, they can also be called a colony or a rookery whereas when they are in water they are called a raft (thanks Google!!).

So lets waddle away and get creating…….

You will need

Powertex Black (approx 75ml)
Powertex Stone Art (approx 20g)
6cm Polystyrene egg
2-3 cm Polystyrene egg
2 x 2-3mm animal eyes
Cocktail Stick
Masking Tape
Plastic container to mix clay in
Brush
Pigments (I opted for orange, white and yellow ochre)
Apron
Disposable Gloves
Optional – Pokey tool
Start by covering your work area with a protective layer.  This could be an waterproof tablecloth, oil cloth or even newspaper.
Break the cocktail stick in 2.  Using one piece connect the 2 eggs together to form a body and head
Place the head at an angle for a more realistic look
Using the masking tape cover the whole shape ensuring that the the transition from the head to the body forms a neck. Place the other piece of cocktail stick on the small egg where the beak will be.  Now coat with a layer of Black Powertex and set aside.
Place approximately 75 ml of Black Powertex into a suitable container (you are going to be mixing this so make sure the sides are high enough) and begin adding the Stone Art, using the non bristle end of your paintbrush begin to stir the mixture.  Add the Stone Art slowly and mix well between each addition.  Keep going until the mixture pulls away from the sides.  Now go in with your gloved hands and knead the mixture bringing together into a firmer clay consistency.  Keep adding more stone art until the clay doesn’t stick to your gloves and there are no white flecks showing.  Make sure you pull the clay apart to check that there are no white flecks inside.
Make sure that the clay isn’t too dry otherwise you will have difficulty covering your penguin. If it is just dip it in a small amount of Powertex and knead it thoroughly.
You can now use the clay or double wrap it in cling film for use later.  So long as you keep it airtight the clay will be useable for several weeks.  This is a bonus as you can make the clay ahead of time and have fun sculpting it later with the children.

 

Take approximately 2/3rds of the clay and roll it into a ball then flatten it into a disc approximately 1/2 cm thick.
Lay it over the beak and onto the head, then using your fingers push it down onto the body thinning it as you go.  Make sure it meets underneath to form a base.  Stand the penguin on your work surface and give it a little wiggle to make sure it will sit without toppling.  If it doesn’t sit properly use a little of the remaining clay to make some feet and/or a tail to support it.
                                      
With the remaining 1/3 clay split it into 2 and form rolls.  Flatten them to around 2mm and shape to form wings.  Attach to the body on the sides.  If your clay has dried, paint on some fresh powertex to stick the wings to. Shape the wings to give your penguin character.
Now make any final adjustments, make sure the beak is a nice shape and push the eyes through the clay into the underlying egg.  You may need to use a pokey tool to make the hole first.
Using the Easy Varnish and pigments dry brush on the colour to complete your penguin.  I opted to colour mine in different ways to make a real mixed waddle.

 

 

Don’t forget, you can always scale it up by using larger eggs to make bigger penguins just remember to increase the amount of clay you make.
I hope you’ve enjoyed this project and look forward to seeing your makes.  Don’t forget to post photos of them over on the Powertex Studio facebook page
Until next time happy creative adventures

 

 

Wedding Day Wish Box

 

Hello there
I used the Frame kit available at Kirsties Handmade Fair, Ragley Hall to create a Wedding Day Wish Box for the happy couple.  Simply write your wish or words of wisdom onto the paper heart, tear off and place in the box for the happy couple to read later.
I opted for Ivory Powertex and a variety of lace pieces to create this special gift.  I hope you enjoy this project and feel free to alter it as you go,  that’s the fun of being creative.

 

I started by using a recycled cardboard box that was the same size as the frame.  I coated this with 2 layers of Powertex to firm it up.  I also coated the frame with a layer of Powertex.

Once dry I placed the frame onto the box and drew around the inside of the heart (push out the heart shape if it is still attached to the base) and then cut that out with a craft knife.

Then I painted the inside of the box at the back that was now exposed.  I also painted the back of the frame and repainted the front of the box and stuck the two together.

I used various pieces of lace to create a patchwork effect on the box.

All lace needs to be coated with Powertex so that is is covered but not dripping.

Firstly,  I took a piece of lace and used the heart as a template.  I cut this out so that the lace fit snugly around the opening.  Coat this in Powertex and place around the opening making sure you press it firmly onto the box.

I then worked my way around the box with all the different laces, laying them in different directions to create interest.

The lace heart I cut out in the earlier step was placed inside the box and the edge of the cut out was covered with a thinner lace ribbon.

Once this was all covered I set it aside.

I took some lace ribbon, dipped it into the Powertex and squeezed out the excess, I then wrapped this to create flowers.  In each corner I used a small piece of gauze that had been dipped in Powertex to sit the flowers into.

Now allow this all to dry thoroughly.

There are lots of videos on YouTube if you’re not sure how to make these.

I have coloured these here so you can see them more easily

For the notepad holder, I used the back of the frame and coated one side with Powertex.  I then placed this onto the back of the wallpaper and allowed it to dry.

Using sharp scissors I cut around the edges, painted the back with Powertex,  then using lace ribbon I added a pretty border.

 


  


For the notepad itself, I used the heart on some thick paper and drew around it making sure I marked the holes.

I cut out the sheets and used a hole punch to make the holes, then threaded ribbon through to hold the together.

I painted the mdf heart burst embellishment and the mdf heart and layered them up ready to tie onto the ribbon as a paperweight.

If you wanted to you could drill holes through the notepad holder and tie the paper onto this to make it totally secure.

For the photograph, I used a laser copy as these don’t smudge.

I worked out where I wanted the heart to sit on the photograph and marked the back of the paper accordingly.

I painted a thin layer of Powertex onto the back of the paper and another layer onto the heart then placed them together.  I turned them over and smoothed out the picture to ensure there are no air bubbles or creases.  Make sure your hands are clean or better still put a piece of kitchen roll on top to protect the picture.

I left this to dry before cutting away the excess with sharp scissors.

I painted the back of the heart with Powertex then added a delicate edge by using lace ribbon dipped in Powertex.

I attached it to the box using a cushion of gauze dipped in Powertex.

I coated the key plate with several layers of Powertex and printed off “wedding day wishes”  but you could hand write this.  I used Powertex to stick the edges to the back of the key plate and then onto the box.
I dry brushed the piece with a combination of burgundy and rich gold however you could match the colours to the wedding party colours for that personal touch.
I hope you’ve enjoyed this project and it has inspired you to have a go.  Don’t forget to post your makes on the Powertex Studio Facebook page as we love to see what you’ve created.
Until next time Happy Creative Adventures
Axx

 

Sassy Seahorse’s day at the beach

Hello there
Welcome to my Sassy Seahorse project, getting her ready for her day at the beach.
For this project I used the Seahorse project pack available at Kirsties handmade fair at Ragley Hall with Black Powertex and a child’s old skirt.
Don’t forget to cover your work surface with plastic, wear an apron and gloves.

 

Start off by joining the two halves of the seahorse together with the rectangle of mdf and at the same time add the hanger.  Use a layer of any Powertex to do this. Allow this to dry.

Place a layer of Powertex onto the front of the seahorse and place the wallpaper directly onto this.  Don’t worry if you have to piece isn’t big enough to cover in one go, piece it together as once it is all coated in Powertex it will not be noticeable.

 

 

Once dry cut around the shape and then coat the wallpaper with a layer of Powertex.

Now take your chosen fabric and dip it into the Powertex, I pour mine into an old plastic container a little at a time.  Dip your fabric and work the Powertex through it making sure it is completely covered but not dripping.

Then place it onto the seahorse wherever you decided,

I used the pretty edging as a bikini skirt and the ties from the waist as the bikini top.  Any fabric buttons or metal ties can also be used to add more interest to your design.

 

Next I took the mdf embellishments and coated them in Powertex

I layered up the two heart bursts with one of the flowers to make an eye.

The paper flowers became her headdress.

Three fabric buttons from the skirt had mdf flowers placed on top of them to make her necklace

The final flower became her belly tattoo.

 

Now set aside to dry, if you can’t wait you can always use a hairdryer to speed up the process.  I used my gloves to prop up the skirt so that it dried in a wave shape.  Powertex doesn’t stick to plastic so its great to use to help form shapes as you simply pull it out once the piece has dried
Finally, I used the easy varnish along with turquoise, burgundy, white and rich gold to dry brush the colour into the piece.
To dry brush, place a 5p sized amount of varnish onto your plastic work surface,  dip your brush into the varnish then straight into the pigment (work from the pot as the varnish does not contaminate it).  Now mix to a thick paste on a clean area of your work surface.  Take a piece of kitchen roll and wipe off the excess colour, then holding the brush flat to your work brush across the raise areas.
To add a more opaque covering hold the brush loosely at the end and dust across the area.  The more times you go across the deeper the colour will be.
Don’t be afraid to mix your pigments together to create different shades and effects, the combinations are limitless.
If you want to place this outside, make sure that you coat the back and sides with Powertex to complete seal the mdf then allow it to dry in the house for three weeks.
Well Sassy is ready for her day at the beach and she hopes your sea horses will be along to join her.  Don’t forget to post your makes on the Powertex Studio Facebook page, we love to see what you create.
Until next time Happy Creative Adventures
Annette



Sweet Beautiful Music

Hi there, as I write this blog we are having the most glorious weather for the first May Bank holiday in the UK and it is fabulous!  I’m listening to the Peaceful Guitar play list on Spotify and there’s a lovely breeze wafting through the house….mmmmm… to top it all I love this guitar project pack!

Powertex has taken this one right back to basics to show how you can create some really super projects by using just the magic of Powertex, a nicely constructed kit and the basic pigment kit.

So first I joined the 2 main pieces together with Bronze Powertex and added the hanging bracket as show in the two images below.


One the back was dry I used the textured paper to cover the front of the guitar, again using Bronze Powertex – there’s no need to use any other mediums as the magic of Powertex covers so many uses.
You can see how I made two pieces to cover the body if the Guitar.  I also laid out the main design of my piece.  The only parts of the kit I didn’t use were the two paper flowers. I used more of the Bronze Powertex to stick the embellishments in place, the only thing I added was some jute string. Once everything was in place I left it to dry overnight.

Next I used PowerColor Pigments and Easy Varnish  to build an Ombre shading moving through from Yellow Ochre to Red Ochre.  I repeated this shading several times until I got the effect I was after.

To build the colour and shading I also added in some Titanium white in the latter layers.

I coloured the embellishments as well.

Once I was happy with the main colour I mixed up some silver Colortrix and cloured the strings.

I then added Burgundy PowerColor to the heart/flower embelishment and finally added some Rich Gold Colortrix to the centre of the two main embellishments and a faint brushing over the textured paper.

Below are some close ups to help you see the effects.

Hope you enjoy the Powertex Design Teams take on this project and we inspire you to have a go yourself.  Don’t forget to share your makes in the Powertex Studio on Facebook.

Happy Crafting
Fi

 

 

 

 

 

 

 

Simple but effective

Hello, one and all. Me again, this time sharing with you a couple of easy, fun and elegant projects.
The first piece I want to share with you is the seahorse project pack.

 

Please excuse my  Powertex covered workspace.
( I really need to clean this )

 

 

I opened the pack and looked at all the yummy stash in the pack.
Keeping this project simple was the key and I only used some cardboard and a piece of lace, which was from an old top from my Daughter.
I firstly glued to the two pieces of seahorse together with ivory Powertex both sides and dried it using my faithful old hairdryer.
I then soaked a piece of lace in the ivory Powertex and laid it down on my seahorse and again dried it with my hairdryer, to speed up the process, as I was eager to move on.

 

I found some different lace and thought it would make a good fin shape. I also added the same lace to the top part of the seahorse, after adding some cardboard, as this was my original thought process but decided that the lace effect looked way better.
Now for the best part, the colour transformation. I chose my  POWERCOLOUR and my general idea was to try an do an “ombre” effect but as you will see, sometimes the Powertex has other ideas!
BUT that is the beauty of this product, you can paint it whatever colour you like and if you get bored of it or it does not go with your colour scheme, then you can just change it!
(I really, really, must clean my workspace)

 

I added the yummy bits from the project pack and again glued with Powertex and decided to highlight in the RICH GOLD pigment and also WHITE the two colours of which I do love to highlight.
I titivated a bit more with pigments and varnish until I was happy with how she looked.
So here she is, all done and using just the project pack and a little bit of lace.
I think she turned out rather well myself.
Oh, and I added a small black bead on the eye area. A brilliant project if you are new to Powertex and not much other materials used to create this (I think ) beautiful Seahorse.
Thank you for reading and I hope I have inspired you to get some Powertex and give it a whirl, you won’t be disappointed.
Till next time
Jinny