Powertex Stamped Pendant

Powertex stamped pendant by Kore Sage

I was inspired this month by Abigail’s Stone Art Clay Pendant as I wanted to try the stamping into clay technique. Using her tutorial I created my own Powertex stamped pendant.

Powertex mdf and stone art clay stamped pendant
Powertex stamped clay pendant by Kore Sage

I quite like small projects like these that can be done quickly but have very satisfying results. It’s a great gift idea too.

I didn’t have a bauble shape for mine so I used an mdf ring shape like these. I chose the Studio Light letters and numbers stamp to create the pattern in my clay. It’s a personal favourite as I love using letters and numbers in my projects.

Materials

mdf rings from Powertex UK
mdf rings from Powertex UK

I followed Abigail’s steps from the tutorial and despite using different shapes it was easy to follow and really quick to do. There’s a break for the clay to dry but this can be sped up with a hairdryer if you like.

Making a Powertex Stamped Pendant

Simply mix up some air dry clay with Red Powertex Fabric Hardener and roll out a layer for your mdf. Stamping into the clay creates a clear texture.

I love the way the Bister spray deepens the textures. A quick blast with a hairdryer makes this step fast.

Powertex Stone Art Clay stamping
Stamping into Stone Art clay

I used my clay over the edge of the mdf and wrapped the Powertex with string on the side to keep it neat.

Powertex pendant string edge
Detail of string edge

With a dab of clay I added a large jump ring to the top of my pendant. I left mine to dry overnight.

Attach jump ring with a dab of Powertex clay
Add jump rings

The Powerwax and pigment mix softens the finish on the pendant. You can also mix your pigments with Easy Varnish and use a dry brushing technique over the textures.

Powertex and string detail
Powertex string spiral on mdf

Another jump ring and some cord and I have a lightweight statement necklace.

Powertex stamped pendant by Kore Sage
Powertex Stamped pendant by Kore Sage

I used some of the very small mdf circles to create a couple of tiny pieces. These could be made into earrings or rings with some basic jewellery findings. Customising this piece with your favourite colours or stamps is so easy too. These would make lovely handmade gifts.

Powertex stamped pendant

I hope you’ll give a pendant a try or maybe take the techniques and create something else! Remember you can share your makes at The Powertex Studio on Facebook or follow us on Instagram.

Until then, make a little time to let your art out.

Kore xx

Leo the Powertex Lion

Designer – Abigail Lagden

Every now and then I have to grudgingly accept that a brush has gone past it’s usable life as a brush. The clue is usually when only the top 2mm of the bristles bend! However, I hate to throw things away, so I have almost three years worth of dud brushes hoarded away, awaiting a purpose. Well, that purpose has finally arrived and here is Leo the Lion to give a few of them a new life.

Leo the Lion

One of my favourite animals has to be the beautiful and majestic lion. Not really very surprising as my star sign is Leo. So when I was asked to create an animal sculpture using recycled materials, it just had to be a lion using my dud brushes.

Leo the Powertex lion by Abigail Lagden.
Leo the Powertex Lion by Abigail Lagden

Materials List

Step by Step Guide

Remove the brush heads

Firstly, I removed the brush heads from the 14 old brushes (tip: soaking in boiling water will help loosen the adhesive).

Removing the brush heads
Step 1

Arrange the brush heads

The brush heads were then arranged in a sunburst to created the outline of the lion’s mane.

Create the mane with brush heads
Step 2

Stone Art clay

I mixed stone art with bronze Powertex universal medium to form a clay and used this to hold the brush head arrangement together.

Use Powertex Stone Art clay to hold the brush heads together.
Step 3

Sculpt the face

I then built up the central area using some tin foil before sculpting the face of my lion over the top with the bronze stone art clay.

Sculpt the face
Step 4

Create the mane

To create the lion’s mane, I used pieces of powercotton soaked in bronze Powertex universal medium. For the whiskers I used some of the bristles from the brushes.

Add Powertex Powercotton mane
Step 5

Dry brushing

Finally, I applied copper, bronze gold and rich gold Colortricx pigments mixed with easy varnish.

Dry brush technique to paint metallic pigments onto the lion.
Step 6

I hope you have enjoyed seeing how I created my Leo and that you are inspired to get creating your own project. Please do share any of your makes with us over in the Powertex Studio Facebook group.

If you like astrology themed projects, why not visit Shell’s article about how she made her stunning taurus inspired headdress.

You can also see more of what I’ve been creating and information about my workshops on my website and my Curiously Contrary facebook page.

Until next time, Abs xx

If Medusa could Stone Art you

Designer – Shell North

For my July article we are delving into ancient Rome and looking at incorporating Medusa and Stone Art. The Romans were renowned for their love of wine, both producing it and drinking it. So a wine Medusa jug is what I will teach you to make this time.

Medusa was a Gorgon and one of the most frequently repeated motifs in Greek and later, in Roman antiquities. The Legend has it that if you were to gaze into her eyes you would turn to stone. Or in our case…Stone art!

Powertex Stone Art Medusa jug by Shell North

Materials List

Powertex materials list for Medusa jug
Powertex item list

How to make a Stone Art Medusa jug

Make some Stone Art clay

To start I mixed my own colour using the Bronze, Lead and Ivory Powertex Fabric Hardener to make my own shade of stone art clay. I mixed it with equal parts Stone Art powder to make the clay.

Mixing Powertex

TOP TIP Leave some of the Powertex mix aside before mixing in the Stone Art powder as you will need some for the cotton later.

Making the jug shape

Insert the bottle into the large yoghurt pot, add foil to create shape and cover in masking tape. Shape foil to create a handle and tape as above.

Make the jug shape with foil

The messy fun bit

Using the Stone Art clay, smooth pieces over the base little by little until covered. Shape a spout as desired with the Stone Art clay.

Add Stone Art clay

Adding the motif

Cover the back of your plaster face with a little Stone Art clay and smooth around the edges into position.

Plaster face
Use a plaster face

Creating the deadly snake hair

To create Medusa’s hair use some tiny strips of cotton and work them into the Powertex Fabric Hardener colour mix you made earlier.

Making fabric snake hair
Making snake hair

Creating moving hair

Using the wet strands, apply one by one in a wiggly position, over lapping and layering to create movement like living snakes!

Snake hair Medusa
Medusa

To finish

Dry brush lighter shades of Grey and Red ochre Powercolor pigments and Easy Varnish, finishing with lighter colours last to give a worn/aged appearance.

Powertex Stone Art Medusa jug by Shell North
Powertex Medusa jug by Shell North

Handy tip

TOP TIP To get even coverage with stone art, why not use a pasta machine to roll out your clay all in one equally level sheet. I have found many cheap second hand ones for £5 in charity shops! Just make sure your clay is not sticky before rolling through.

Did you see Kore’s planet canvas recently? I was hugely inspired by it so if you missed it, find it here and you too may find inspiration.

Hope you enjoyed this article? If so please comment below or share your inspiration on the Facebook Powertex Studio page.

Well that’s all for me this month,

Peace, love and a little splash of wine from my jug 😉

Shell xxx

Powertex Easy 3D Flex

Product of the Month for July 2019

Easy 3D comes as a heavy powder that is mixed with Powertex Fabric Hardener to create a clay. The clay is like dough and can be applied to canvas art as well as sculpture. It’s designed to crack as it dries which can leave deep cracked textures in the surface.

If you would like to try some Easy 3D Flex for yourself you can find it at Powertex UK. Need a little help to make up the clay? Just go to the instruction sheet at the bottom.

Powertex Design Team examples

The Design Team love to use this clay. Here’s some examples of how they’ve used it in their creations.

Sheep sculpture with Easy 3D Flex by Annette Smyth
Sculpture by Annette Smyth
Powertex Mixed media canvas by Anna Emelia Howlett
Mixed media canvas by Anna Emelia Howlett
Soul Sister sculpture with Powertex Easy 3D Flex by Donna Mcghie
Soul sister by Donna Mcghie

This planet art project by Jill has a tutorial in the Magazine, click on the image to open.

Powertex planet with Easy 3D Flex by Jill Cullum
Planet art by Jill Cullum
Canvas art by Fiona Potter Powertex Easy 3D Flex
Canvas art by Fiona Potter
Luxury egg by Jinny Holt with Powertex Easy 3D Flex
Mixed media egg by Jinny Holt

Shell’s beautiful Mandala art also has a tutorial, click on the image to see her step by step blog.

Mandala wall art by Shell North Powertex Easy 3D Flex
Mandala art by Shell North

This art doll kit is highly textured. You can see how Abigail puts this together in her tutorial, click on the image.

Powertex Art doll by Abigail Lagden
Art doll by Abigail Lagden
Canvas art by Kore Sage with Powertex textures
Canvas by Kore Sage

Find other project tutorials in this online magazine, just use the search bar to look for Easy 3D Flex in the categories.

Head over to Powertex Addicts United and join our community group, The Powertex Studio, share your creations. If you have a creation using Easy 3D clay, we’d love to see your makes.

If these projects have inspired you to try, you can get your own Easy 3D Flex at Powertex UK. Don’t forget you can use all your Powertex pigments, inks, paints and bister to colour these textures.

Here’s how to use Powertex Easy 3D Flex

If you’d like to mix your own Easy 3D clay but can’t get to a tutor, this will help you out.

Powertex Easy 3D Flex instruction sheet Powertex UK Easy3Dflex
How to use Powertex Easy 3D Flex

Venetian Carnival Canvas

The Secret Art Box – July 2019

Designer: Gill Goldsmith

This month’s Powertex Secret Art Box was full of wonderful Venetian Carnival themes and there was so much to play with. From the gorgeous lace and MDF masks to the Venice themed rice paper and the Fleur de Lys mould from ArtyCo. I couldn’t wait to get creating my Venetian carnival canvas.

Powertex UK Secret Art Box July 2019
Powertex UK Secret Art Box July 2019

I’ve been to Venice twice and think it is a beautiful city, so wanted to recreate the beauty and also the aged feel of the buildings with my piece. An 8 inch box canvas was the perfect size to create my mini work of art.

Additional materials used:

  • 8 inch box canvas
  • Powertex Easy Coat Mat
  • Blue and Brown Bister sprays
  • Powertex pigments in Violet Valentine, Clear gold and Silver

How to create your Venetian Carnival Canvas

Step 1

I painted the canvas with Easy Coat Mat and stuck the paper in position making sure I painted more over the image to help it adhere and protect the surface.

Applying Powertex rice paper

Top tip

A great tip is to wet around the edge of the image you want on the paper with a wet paintbrush. The paper will tear easily and give a textured edge.

Step 2

Next I created more texture on the canvas by mixing the Easy 3D flex, included in this month’s box, with the white Powertex, also in this month’s box.
Mix it until the clay spreads easily. Apply with a palette knife to the top and bottom corners to give the Italian stucco plaster effect.

Easy 3d Flex texture on canvas

Step 3

You could allow this to dry naturally but I sped up the process with a hairdryer. This gives a lovely bubbly texture.

Step 4

Using the white Powertex I painted the large mask. Dip the lace pieces in Powertex, making sure they are covered but not saturated.

Step 5

I worked on the large MDF mask using the various lace pieces included in the kit, and the MDF flourish and moulded flourish. Use White Powertex to stick it to the canvas.

White Powertex venetian carnival mask on canvas

Step 6

I created an air dry clay fleur de lys from the Artyco mould and added to the canvas.

Step 7

I removed the Venice wording from the MDF carrier sheet and used the negative image on the canvas.

Ensuring it was coated in the Powertex and then adding embellishments from my own stash of paper flowers, corners and charms.

White Powertex venetian carnival mask on canvas

Step 8

When completely dry, I sprayed it liberally with blue and brown bister. Don’t panic if you feel you’ve sprayed too much bister, you can wipe it back so it’s not so dark.

Adding Bister colour to Powertex mask

Allow this to dry thoroughly, before you highlight the piece with dry brushing.

Step 9

Finally once this was dry I could use my Pearl Red Pigment, Turquoise pigment and the Plum Pudding Acrylic Paint and varnish included in the kit.

This is where the piece comes to life, as you dry brush each area of detail and see all the texture emerge.

I also used violet valentine pearl pigment, clear gold and silver pigments from my stash.

Tutor Tip

Use a tiny amount of varnish, about the size of a 5p, and dip your brush into the varnish then lightly into your pigment. Work this on your brush and then take the excess of colour off on a cloth or kitchen paper before lightly stroking the brush across your work. The art of dry brushing is a dry brush, light strokes and build up the colour.

Powertex Venetian carnival canvas by gill goldsmith

I hope you enjoyed this project and that you will give it a go yourself. Please share your makes in The Powertex Studio and The Secret Art Box groups as we love to see what you create.

My last Secret Art Box project was an underwater theme in May. I’m a Powertex tutor in Kent, UK and you can find out more about me and my workshops at The Powertex Port.

Until next month, Happy Powertexing,
Lots of love
Gill xxx

Stormy Sea Tag with Powertex

Designed by – Donna Mcghie

Powertex stormy sea tag scene using mdf tags by Donna Mcghie
Seascape tag

Tags are really popular in the crafting world at the moment. For my stormy sea tag, I’m using the A5 tag from Powertex UK. They are great quality to work with, whatever your style of crafting.

Don’t you just love the fact that we all have our own individual style?  Obviously style evolves as we experiment and learn new techniques.  My own style I would describe as rather haphazard.  I’ve never been one for over thinking a project. 

Once many years ago an art tutor declared my work to be very ‘organic’. Initially I wasn’t quite sure how to take this, but I think I know what she was getting at. As an artist I like to allow my paint, Powertex, or whatever medium I’m using to have a life of it’s own.  You could say I’m a ‘go with the flow’ kind of a girl.

Go With The Flow

What do I mean by ‘go with the flow?’ Well, according to the artist Jenny Holzer “Going with the flow is soothing but risky.” I find it soothing to allow Powertex to take on a life of it’s own. I also love the sense of risk, the excitement of never quite knowing what I will end up with.

That could be why I love stormy seascapes. How wonderful that everyone’s storm will end up slightly different.

Materials list:

1: Prepare with White Powertex

Prepare mdf with white powertex
A5 tag and lighthouse mdf

Sponge Powertex White over MDF pieces and set aside to dry.

2: Blue Bister

Powertex mdf tab with blue bister and white fabric hardener for sky
Powertex Blue Bister makes a perfect blustery sky

Spray Powertex Ready Mixed Blue Bister on the top third of the tag. Use a damp sponge wipe away spaces for the clouds.

3: Adding fabric strips

Powertex mdf lighthouse template
I set this aside to dry for a while

Soak denim strips in transparent hardener to for sections of the lighthouse and paint the top.  A blast of ready mixed black bister gives a rugged effect.

4: Pouring Powertex

powertex mdf tag with bisters and fabric hardeners for stormy waves
This was my favourite part, where I got to ‘go with the flow’

Fun Time! Pour blue fabric hardener with smidgeon of white for the wave. Whilst still wet spray with green bister and blast with dryer for movement and crackles.

5: Place the lighthouse

powertex stormy seascape tag with lighthouse
It’s starting to come together

Place the lighthouse into position. Almost there now, just a couple of final touches and your picture will be complete.

6: Adding texture

powertex texture on mdf tag
Time for some texture

Steel grey pigment with some easy structure paste create a rock for the lighthouse to stand on, and 3D Sand with Yellow Ochre Powertex form a shoreline. If you wish to add a few more wild white touches with a pallet knife, go for it.

Finished Piece

Although this is only A5 in size, I think it packs a punch.  As I stated above, this was very much a ‘go with the flow’ project. 

Of course does help to have a rough idea of composition to keep the image interesting. Being a fan of the so called rule of thirds so, I placed my focal point (the lighthouse) to the left of the scene.

I also roughly directed the white foam on the wave to guide the eye up towards my focal point.

Powertex tag by Donna Mcghie
Stormy sea tag
The finished stormy sea tag

Please do post photos of your own stormy sea tags over on the Powertex Facebook Page, we love seeing what you create. Also feel free to leave any comments on here.

You can get tips on using Stone Art clay on a canvas seascape in last month’s blog.

I’m the Powertex tutor for Southampton, so if you are interested in a workshop please pop over to my website where details can be found on the blog section. More info on Jenny Holzer can be found here.

That’s all from me for now folks. Keep on going with the flow and see you next month.

The sea is my heart, a Powertex octopus

Designer – Shell North

A Powertex octopus. The theme this month is Underwater, this is one of my favourite go to themes I love to create with as I love the sea. Living in Dorset I’m close to the sea and often find myself seeking respite on some of the peaceful secluded beach spots I know of. There are so many interesting aspects of the sea I get inspiration from, the creatures, colours, sounds and textures.

One of my favourite sea creatures are octopuses, they are such interesting creatures, incredibly intelligent and majestic.

So then, it’s decided that in this article I will be creating an octopus sculpture. I chose to work with both fabric and Stone Art clay to get the look I wanted.

Powertex Octopus sculpture by Shell North
Powertex Octopus Sculpture by Shell North

Materials used in my Powertex octopus

Supplies for Powertex octopus
Supplies

Tools

Skill level

Intermediate due to size

Creating the body shape

  • Using wire mesh, create a balloon shape with a skirt, stuff with waste materials (like used gloves) then cover in foil, then cover in masking tape.
Create the body shape
Step 1 Create the body shape

Making the tentacles

  • Wrap 8 lengths of wire in foil until the right thickness for tentacles and then place around main body. Cover and secure with masking tape and curl into shape.
Adding tentacles with wire and foil
Step 2 Add tentacles

Making the eyes

  • Cut the polystyrene ball to make the shape of an octopus eye, attach the eye with hot glue and again to attach to the body.
Craft octopus eyes with polystyrene and plastic craft eyes
Step 3 Add eyes

Covering with stone art clay

  • Roll out the Stone Art clay to 5mm thick, dampen with water and firm in place over the sculpture. Use a pallet knife and a little water to blend any joins.

Adding fabric for the web area

  • Using strips of jersey cotton, work in the Powertex Universal Medium and attach the fabric like a skirt around the mantle. Blend the edges.
Blend the edges of the fabric with the clay
Blend the edges of fabric and clay

To finish the project

While the clay is still wet use the texture sponge to create a texture on the surface of the clay.

Dry brushing

Leave to dry a few hours, then mix powder pigments of your choice with easy varnish and dry brush colour onto your sculpture.

Powertex Octopus sculpture by Shell North
And here’s the finished Powertex Octopus by Shell North

I will probably add suckers on the underneath of the tentacles at a later time, but due to its size over ran with the time allocated (1.5 days).

Top tip

When shaping the tentacles I sat the octopus sculpture on top of the up-turned 250g stone art tub so I could give the tentacles more movement instead of them being flat.

Did you know?

Octopuses have 3 hearts? Really does make them the heart of the sea!

Well I hope you enjoyed my article this month. If you’re inspired to sculpt with Stone Art clay, catch my Powertex bird sculpture article from Jan.

Well that’s all from me until next month,

Peace, love and octopus hugs,

Shell x

Pastel Powertex Bottle Vases

Powertex bottle vases in pastels

Designer: Kore Sage

How to create Pastel Powertex

Pastel colours can be mixed with Powertex universal medium to create soft effects for your projects. Pastel Powertex is perfect for Spring projects, florals and even Mother’s Day gifts. I’m Kore and I want to show you how I mix pastel colours and highlight the textures. I’ll be transforming small glass drink bottles into floral Spring vases.

Powertex bottle vases in pastels
Powertex pastel bottle vases

Powertex Universal Medium colours are all mixable and with the exception of Transparent, will be weatherproof when cured. Pastel colours can be mixed using Ivory or White although I used Ivory for my project.

I recommend you experiment with tiny amounts of your colours to find your favourite combinations. I’m using my favourite pale blue. I add small amounts of blue Powertex to Ivory (or White) until I have a shade I like.

It is possible to mix more than two colours together. For example Blue and Yellow Ochre to make green then mix with Ivory for a lighter shade.

Materials list

Prepare the fabric

Cut strips of light fabric approximately 1-2 inches wide, pieces of string 2 – 4 inches long and choose embellishments.

Preparing strips of fabric for Powertex bottle
Step one

Mix pastel Powertex

Pour your Ivory Powertex onto a plate or dish and add a tiny amount of Blue Powertex. Add a little until you have a pastel shade.

Mixing Powertex pastel colours with Blue and Ivory
Step two

Wrap the bottle

Coat fabric strips with the Powertex mix and wrap around the bottle until it’s covered. Wrap loosely in spirals.

Bottle wrapped with fabric in blue Powertex
Step three

Add embellishments

Add string and floral embellishments. I created spiral shapes with string and coated embellishments with Powertex and adhered them to the bottle.

Blue Powertex bottle adding string and wooden embellishments
Step four

Mix dry paint

Mix a dry paint with white Powercolor and Easy Varnish

Mixing white paint with Easy Varnish and White Powercolor powder
Step five

Highlight textures

Use a dry brushing technique to highlight the textures of the fabric and the enbellishments. Keep your brush flat and in the same direction.

Using a dry brushing technique to highlight textures
Step six

Pastel Powertex bottle

These Spring vases use simple techniques to create textured vases that can be made in your favourite colours. They look lovely in groups with your favourite single stem flowers. 

Finished pastel blue bottle

Please do leave me a comment if you would like to try Powertex in pastels. Or hop over to this article where Abigail is mixing purple for her mixed media project. Like our Facebook page where you can join the private group and share your own makes.

I hope you make some time to let your art out. Find more of my work at Kore Sage Art, until next time, Kore x