Planet in the Night Sky

A fantasy planet

Designer – Jill Cullum

Planet in the night sky in Powertex by Jill Cullum
Powertex Planet in the Night Sky by Jill Cullum

For my planet in the night sky, inspiration came from warm summer nights, sat in the garden, looking out for shooting stars. I decided to try and replicate one of the planets. Hmmm, once started though, my imagination overtook and the finished article became much more magical.

Easy 3d flex makes beautiful cracks and texture. Experiment using different mediums to add colours. Here I have used layers of inks and acrylics, with a final layer of wax.

As you will see from the photographs, things changed along the way. This is what I love about mixed media. Some layers get covered, some peak through. It’s all part of the journey of creating what you love. Just go with it!

The Secret Art Loft acrylics and inks work wonderfully for layering up. Their translucent quality makes blending easy, and the metallic inks look like molten metal.

Top tip

I find it is really important with mixed media, to let each layer dry thoroughly before moving onto the next. Not an easy one for me, as I am an impatient crafter. However, your layers will become muddy if they aren’t dry.

Materials list

Creating a base

Creating a base for the planet with Powertex
Step 1 – creating a base

Pour Powertex liquid colour onto the canvas. Spray with Bister of a different colour then dry with a hairdryer, to create the crackle effect.

Add texture by creating a heavy crackle effect

Adding more texture to your planet base with Easy 3d Flex
Step 2 – adding texture

Mix Easy 3d flex with Ivory Powertex to create a clay. Layer over half of the canvas. Dry with hair-dryer spraying lightly with blue bister during the process.

Creating further texture

Use Powertex and fabric and clay to add texture layers to your planet
Step 3 – creating further texture

Using material, coated in Ivory Powertex and small ‘craters’ made from the 3d flex clay, build the layers of your planet.

Adding colour

Add green colours to the cracked areas of the planet
Step 4 – adding colour

Start by adding green ink to the deep cracked area and violet acrylic to the green side of the planet.

Building layers

add clay craters and shapes to the surface
Step 5 – building layers

Using greens, pinks and purples, layer the craters, blending as you go. Paint the material section with black acrylic, then add layers of metallic acrylic.

Powerwax

Use Powerwax mixed with powder pigment to layer on colour to your planet textures
Step 6 – Powerwax

On the side created by 3d flex, add a layer of Powerwax, mixed with pigment. Once dry, wipe with a damp sponge to add interest.

Finishing Touches

I decided my fantasy planet needed a touch more ‘bling’ so I added a few beads, blending in with the colours I had chosen along the way. The joys of creating a fantasy planet are that you can really be free with your choice of colours and the texture that you create. It’s nice not to be too rigid in your planning, as planets evolve, then so should a piece of art.

Planet in the night sky

Powertex planet in the night sky by Jill Cullum
Powertex planet in the night sky

I am looking forward to seeing lots of new planets, so feel free to share them in the Powertex Studio.

If you would like further planet inspiration take a look at this blog from Annette Smyth. Or why not join me for a workshop to create your own planet. Bye for now, Jill x

The Northern Lights in Powertex

Aurora Borealis in Powertex
Northern Lights using Powertex

Designer: Donna Mcghie

In this article I will show you how to recreate my interpretation of the Northern Lights using Powertex.

The Northern Lights, or Aurora Borealis have always fascinated me. Like the ocean which was the inspiration for my last blog, they have that ethereal, slightly unworldly quality. They are a reminder of just how wonderful nature can be.

The lovely Tracey Evans at Powertex HQ asked if I could use lots of colour and texture in this article. I used the gorgeous pigments to create the fluorescent greens and pinks for the sky. Textured stone art clay was added to signify water.

One thing I hadn’t realised before doing some research for this article, is that the Northern Lights also occur during the daytime.  However the human eye is unable to see them at these times as the sun is too strong for them to show up.

Materials List:

Cover the canvas

Powertex base for Northern Lights Blog
I mixed Sherbert Dip Pigment with White Fabric Hardener to create a luminous base

I roughly covered my canvas using a mixture of Sherbert Dip Pigment and White Powertex for the sky, and White and Blue Powertex for the sea.

Create crackles

Northern lights sky created using powertex pigments
I also added some Violet Valentine to the sky

After spraying with Black Bister I blasted with a hair dryer to create crackles, and used a palette knife to scrape back and allow the yellows to shine through.

Stone Art sea

Powertex Clay added to canvas for Northern Lights Blog
I had added in some trees in the background here, but they didn’t look right so I faded them out using my pigments over the top.

I used segments of Stone Art clay to create the illusion of a choppy sea. Powertex pearl pigments reflect the colours in the sky.

Tree textures

Powertex acrylic ink used to create trees on canvas
Rather than having the trees all along the shoreline, which didn’t look right, I opted to use an asymmetrical composition instead.

Putting a cluster of trees fading downwards, I painted some corrugated cardboard with acrylic and used a stubby brush to indicate branches.

Highlight waves

Powertex Power Wax to give highlights to waves on Stone Art Clay
Make Stone Art clay by mixing a small quantity of Stone Art with some Powertex until it forms a dough like substance

I liked the way the Stone Art clay waves were curling and decided to highlight this using Powercolor Titanium White Pigment.

Powerwax sky

I used Powertex Powerwax for a deep shine on the canvas
Powerwax is perfect for adding extra depth and shine.

Finally I added some extra depth to the colours in the sky using Powerwax and pigment. I dip my finger in the wax, then the pigment and gently rub on in a circular movement.

Using the Powerwax in the final stage really helped to bring the picture to life. I was able to create beautiful swirling patterns in the sky using the amazingly vibrant Pearl Pigments which gave just the ethereal atmosphere I was hoping for.

Northern Lights in Powertex

My finished Northern Lights Powertex Canvas

That’s all from me for this month. I hope you have enjoyed this step by step article, and would love to see any Northern Lights inspired artwork you create over on our Facebook page. Please feel free to leave any comments, (especially nice ones).

If you are in the Southampton area and fancy coming along to a workshop you can find all my upcoming events on the blog section of www.artandmurals.co.uk. My Facebook page also has my events listed.

Take care, and see you next month 🙂

Upcycled Powertex pot

Designed by – Anna Emelia Howlett

Upcycled Powertex Pot by Anna Howlett

If you saw my shows with Powertex UK on HOCHANDA on May 3rd at 12pm and 4pm you would have caught my water pot. Made from my mum’s giant yoghurt pot I felt it was only fair to gift it to her. I hope you felt inspired to make your own upcycled powertex pot. Here are some tips and a materials list for how I made mine.

Materials

Stone art clay ammonite fossils
All pearl pigments from the party pearls pigment tray were used on the fossils to make them pop.

What to use to create an upcycled Powertex pot

Don’t forget Powertex can do many things. It acts like a primer, glue and paint. It will harden most fabrics and textiles. If you would like them to be water resistant you need to use fibres with at least 80% cotton in them, then cure for 3 weeks. For my upcycled Powertex pot I used black Powertex fabric hardener on different fabrics and textiles to cover the pot. Coated the mdf starfish with a mixture of black Powertex, 3d sand and balls. I created some stone art clay, pressed into the new super cute fossil moulds and stuck down with Powertex.

Dry brushing with White Powertex
Dry brush white Powertex on the black Powertex to pick out the detail.

How to make your pearl pigments pop

Leave your black base layer to harden by leaving to dry, either in the air or with a hair dryer. Then use the new White Powertex to dry brush over the top because this helps to bring out all the texture in the materials. It also gives a base for your colours to lie on top of. The pearl pigments are translucent and this technique allows them to show up and pop on a black base. This is because you’ve put the white layer down over the black.

Using pearl pigments to highlight
Pearl pigments

Share your upcycled Powertex pot with us

These make super water pots or plant pots. Why not give it a go! And don’t forget to share your makes in The Powertex studio, I love knowing I’ve inspired you to create your own works of art. Please leave a me a note in the comments if you have found this article useful. You can find me at Rosehart Studio. You might also be interested in my mixed media canvas project. Toodles Anna xXx

Upcycled Powertex Pot by Anna Howlett

The sea is my heart, a Powertex octopus

Designer – Shell North

A Powertex octopus. The theme this month is Underwater, this is one of my favourite go to themes I love to create with as I love the sea. Living in Dorset I’m close to the sea and often find myself seeking respite on some of the peaceful secluded beach spots I know of. There are so many interesting aspects of the sea I get inspiration from, the creatures, colours, sounds and textures.

One of my favourite sea creatures are octopuses, they are such interesting creatures, incredibly intelligent and majestic.

So then, it’s decided that in this article I will be creating an octopus sculpture. I chose to work with both fabric and Stone Art clay to get the look I wanted.

Powertex Octopus sculpture by Shell North
Powertex Octopus Sculpture by Shell North

Materials used in my Powertex octopus

Supplies for Powertex octopus
Supplies

Tools

Skill level

Intermediate due to size

Creating the body shape

  • Using wire mesh, create a balloon shape with a skirt, stuff with waste materials (like used gloves) then cover in foil, then cover in masking tape.
Create the body shape
Step 1 Create the body shape

Making the tentacles

  • Wrap 8 lengths of wire in foil until the right thickness for tentacles and then place around main body. Cover and secure with masking tape and curl into shape.
Adding tentacles with wire and foil
Step 2 Add tentacles

Making the eyes

  • Cut the polystyrene ball to make the shape of an octopus eye, attach the eye with hot glue and again to attach to the body.
Craft octopus eyes with polystyrene and plastic craft eyes
Step 3 Add eyes

Covering with stone art clay

  • Roll out the Stone Art clay to 5mm thick, dampen with water and firm in place over the sculpture. Use a pallet knife and a little water to blend any joins.

Adding fabric for the web area

  • Using strips of jersey cotton, work in the Powertex Universal Medium and attach the fabric like a skirt around the mantle. Blend the edges.
Blend the edges of the fabric with the clay
Blend the edges of fabric and clay

To finish the project

While the clay is still wet use the texture sponge to create a texture on the surface of the clay.

Dry brushing

Leave to dry a few hours, then mix powder pigments of your choice with easy varnish and dry brush colour onto your sculpture.

Powertex Octopus sculpture by Shell North
And here’s the finished Powertex Octopus by Shell North

I will probably add suckers on the underneath of the tentacles at a later time, but due to its size over ran with the time allocated (1.5 days).

Top tip

When shaping the tentacles I sat the octopus sculpture on top of the up-turned 250g stone art tub so I could give the tentacles more movement instead of them being flat.

Did you know?

Octopuses have 3 hearts? Really does make them the heart of the sea!

Well I hope you enjoyed my article this month. If you’re inspired to sculpt with Stone Art clay, catch my Powertex bird sculpture article from Jan.

Well that’s all from me until next month,

Peace, love and octopus hugs,

Shell x

Moonlit sea with Powertex

Designer – Kore Sage

I’m lucky enough to live a short walk from the sea. I love to visit under the moonlight and listen to the waves. The colours of the water and the beach are so magical under a full moon. The nautical themed mdf was perfect for creating moonlit sea scenes.

The lighthouse had a lovely message in this piece. That no matter how deep the water gets, trust that you will find your way. I hope my plaques inspire you to create your own underwater scenes.

Moonlit sea scene with Powertex and metallic pigments by Kore Sage
Moonlit sea scene by Kore Sage

Metallic pigments for a moonlit night

Metallic pigments are perfect for creating a moonlit glow on my scenes. For the base colour I used Black Powertex on one design and White Powertex on the other.

On this first plaque, I used Black Powertex to paint and adhere layers of mdf with a nautical theme. Stone Art clay was used in the tiny ammonite mould for the little fossils. I also used lumps of the clay for rocks, building dimension and lifting the mdf shapes.

Powertex mixed media detail by Kore Sage
Texture details

Tiny fabric scraps, 3d balls and Powercotton completed the underwater look. I left it to dry before adding the colours.

Pigments were mixed with Easy Varnish and dry brushed over the textures. I use Golden Olive, Violet Valentine and Blue Curacao which made a beautiful moonlit glow.

Powertex moonlit sea plaque by Kore Sage
Moonlit scene

Ivory Powertex and Bister

Powertex Moonlit sea scene
Under the sea scene

My second scene used Ivory Powertex to paint the pieces and adhere it all together. I used tissue paper and cardboard for the back ground. Stone Art clay built up the scene with the mdf shapes. Small, medium 3d balls and sand added extra texture.

Wite Powertex base
White Powertex

When dry I sprayed it heavily with Blue and Black Bister sprays. I used a strong Rust mix and poured this over some of the textures. I sprayed this with a vinegar and water mix.

When that was all dry I chose Aqua Metallic ink and Copper pigment to highlight my textures.

Copper details on Powertex scene
Copper highlights

These watery moonlit sea scenes were really fun to create and will look great hanging in my home. Be inspired and have a try yourself. Do share your makes over on the Facebook group too, we love to see your creations. Or you can tag us on Instagram with #powertexaddict

Powertex mixed media plaques by Kore Sage

If you like the watery theme you might also like this project. You can also find more of my Powertex art at Kore Sage Art. Until next time, find some time to let your art out.

Ugly Ocean Fish Sculpture

Powertex Fish Sculpture by Jinny Holt

Designer: Jinny Holt

For this months article my theme was Fish Sculpture. So this got me thinking about the ocean and all the plastic that is killing off all the fish and other sea life in our waters.

Plastics and Powertex

Right now it’s estimated that over 12 million tonnes of plastic – everything from plastic bottles and bags to microbeads – end up in our oceans each year. That’s a lorry load of rubbish a minute.

Traveling on ocean currents this plastic is now turning up in every corner of our planet – from Cornish beaches to uninhabited Pacific islands. It is even being found trapped in Arctic ice.

So I executed my article on these facts above and this is a reason why I love using Powertex as my art medium of choice. We can slowly, one piece of plastic at a time reduce our plastic waste by turning it into art.

Supplies

Items needed

Ivory Powertex Universal Medium

Stone Art

Powercolor Pigments in Brown and Green

Polystyrene egg

Kitchen paper, plastic bottle, cardboard strips, textures from stash

Craft wire

Small canvas base

Step 1

For this article, I started by placing some cut wire lengths into the medium-sized polystyrene egg to create a basic fish shape. Some kitchen roll (which is tucked behind the other fibers) and painted it with the IVORY POWERTEX.

Basic fish shape

Step 2

It needed a nose, so I made up some clay by mixing STONE ART and the Ivory Powertex together. I then proceeded to cover the rest of the fish shape in kitchen roll and Powertex.

I added lace for the fins and dried these with a hair dryer to add movement to them.

Powertex fish by Jinny Holt
Added lace for the fins

Step 3

I then set about painting my fish with the PIGMENT POWDERS and Powertex varnish and I put this aside to dry.

I next got the canvas as this is going to be my base for the sculpture. Create the texture by painting on the Ivory Powertex and sprinkling on some sand, kitchen roll and textures from my stash. I set this aside to dry.

Powertex textured canvas
canvas as base

Step 4

I took the plastic bottle and cut a slit up one side of it, so I could add in my painted fish.

Powertex fish sculpture
Slit in plastic bottle

Now the best bit

I then painted the canvas in yellow and green Powertex pigment. I cut the bottle at an angle at the bottom and then adhered it to the canvas. To help hold up the bottle I used some dried moss and shells I had in my stash.

I dry brushed on the complete sculpture with brown pigment and added colour to some of the moss to depict coral. The seaweed is cardboard strips soaked in Ivory Powertex and painted with green pigment. Add them behind the bottle to create the scene.

Ugly ocean fish sculpture
Ugly Ocean Fish Sculpture

Food for thought

So I aim to use as much recycled plastic as I can in my artwork at least I know I am doing my bit to help save our planet.

If I am the rest of the Powertex Design team have left you inspired, we would love to see some of your creations at THE POWERTEX STUDIO over on Facebook. You can also get loads of Powertex inspiration over on Pinterest and Instagram.

Find me sharing my latest makes over on MUMS SHED.

Thank you for reading my article for this month. Did you catch my dragon eggs article from last month?

Live~Love~Laugh~Create

Jinny

Something fishy by Gill Goldsmith

Powertex UK Secret Art Box

Gill is demonstrating the May Secret Art Box and it’s got a watery theme! She’s diving in to the contents and using the unique and mystical Terragreen pigment to create something fishy! Read on for the details.

So I opened the May Secret Art Box from Powertex and WOW! Look at all the goodies that I received and in my perfect theme… nautical.

May 2019 Secret Art Box from Powertex UK

Something fishy

My first make had to be using the fish and I had the idea of making him with a fish bowl. (I’d seen the clear plastic bowls in a well known shop where everything is £1!) So I first covered the fish in black gesso and extended his fins, tail and mouth with air dry clay. I used the ammonite mould, included in the kit, to create his eyes.

Create the fish shape

Tail and fins

Next I covered him in fabric, using the black Powertex in the kit to give the effect of scales and fins and added fringing to his tail.

Create the fins and tail

Seaweed and shells

I created some rocks for the base of the fish bowl, recycling old gloves that I had used to Powertex in. I created texture with the balls in the kit and made shells with the cutter from air dry clay.  Then I used fabric to create the seaweed and left it drying on tin foil. These create movement in the finished pieces. I also used a piece of wire covered in fabric to attach Mr Fish to the bowl.

Leaving pieces to dry

Dry brushing

When all my pieces were dry I’m ready for the exciting bit. The dry brushing with the pearl pigment included in the kit (this month was Terragreen) and some Interference Blue from my stash. I placed the seaweed and rocks into the fish bowl and secured them with Easy Coat Mat, which is a great varnish and strong glue. 

Something Fishy Powertex project by Gill Goldsmith

Final touches

Mr Fish was dry brushed in Terragreen and Gold pigments. I used the fabric covered wire to attach him to the bowl and brushed this with Curacao Blue.  He was also attached to the bowl with Easy Coat Mat varnish. The final touch was using the tiny message from the glass bottle in the kit, which read “Make it Happen” to the top inside of the bowl and this project was complete.

Something fishy by Gill Goldsmith

Mr Fish Secret Art Box Project by Gill Goldsmith. Gill is a Powertex tutor at The Powertex Port in Chatham in Kent. You can see other Secret Art Box projects here and here. If you’d like receive a Secret Art Box, full of Powertex and mixed media goodies, you can subscribe here at Powertex UK.

A kelp forest – under the sea

Kelp Forest by Fiona Potter

It was a beautiful, clear blue sky morning in the glorious heat of Summer 2018 we arrived at Porthgwarra Beach in far west Cornwall just as the tide was receding.  It’s such a beautiful cove and we kept spotting something in the water around the rocks and went to investigate.  It was a whole area of kelp – a Kelp Forest! Wandering through the pools left by the tide there were beautiful shells, stones and shiny pebbles.  This was my inspiration for this Under the Sea piece.

Kelp Forest by Fiona Potter
Under the sea: Kelp Forest

Supplies

How to make a Powertex kelp forest

Step 1: The ingredients
Step 2 - Setting in the wires

Step 1: Use either Stone Art or other air dry clay to push into moulds, leave to dry. Cut 9 or 10 lengths of wire and randomly drill holes into the mdf base.

Tip: I had a tennis ball size piece of Stone Art clay left over from a previous project that I kept. Spray water lightly over a piece of clingfilm which I wrapped tightly around the clay. I sealed it in a reusable plastic bag.

Step 2: Push wires into holes, secure with masking tape then rip lengths of masking tape sticking it the full length of both sides of the wire to create lengths of kelp.

The base

Step 3: Building the composition

Decorate the base

Step 3: Build a thick random layer of Easy Structure on the base, push shells, moulded sea shapes etc into the easy structure. Spray with bisters, set aside to dry.

Tip: If you use a large central shell like I did, it is worth masking off with some cling film or paper before you spray with bister

Step 4: Washing back and adding a top layer

The kelp

Step 4: Wash back the bister from shells and shapes. Use red ochre to colour some of the coral like shapes. Add a generous layer of transparent Powertex fabric harder on the base and drop in mixed art stones.

Step5: Adding the Kelp

Metallic colours

Step 6: Bringing out the colour

Step 5: Rip up lengths of pale green tissue paper and paste onto the kelp using transparent Powertex. Leave to dry. Transparent Powertex helps to keep the transparency.

Tips: Paint the transparent Powertex onto the masking tape and press the tissue onto it with a Powertex soaked brush.

Step 6: Using the blues and greens metallic pigments bring out the highlights of the bottom of the sea.  Brush Mojito Lime and Golden Olive, Limoncello Gold randomly on the kelp. If you leave lighter patches the sun will shine through enhancing the kelp.

Leave it in a place where you get the sun. Watch it at various times of the day to see where the sun lands and where you might want to add further metallics and maybe a pearl or crystal.

I hope this easy but interesting focal piece inspires you to create your own under the sea project. You might also like this lovely fish sculpture project by Annette.

Don’t forget to share your makes in The Powertex Studio and if you can give me a shout out that would be awesome.

That’s me for now, check back in June when I’m upcycling one of my early Angels that has been keeping watch in my garden for the last couple of years.

Bye for now

Fi

Powertex Kelp Forest by Fiona Potter
Powertex Kelp Forest by Fiona Potter

Under The Sea Powertex Sculptures

Powertex shark by Donna Mcgghie

By Donna Mcghie

What lies under the sea can be both beautiful and terrifying in equal measure.

I decided to make my own homage to the 1970’s film Jaws for my first underwater sculpture for this article. Thanks to this film I always feel a primeval sense of unease when swimming in deep water, and that music hovers around at the back of my brain. However at the same time I also have an exhilarating rush of adrenaline. My senses feel alert and vibrant. 

Under the sea, Powertex shark by Donna Mcghie
Although I am scared of sharks, I have grown rather fond of this gnarly old Powertex king of the seas

Powertex Stone art mixed with black Powertex fabric hardener was the perfect medium for this gnarled, battle scarred shark.

Powertex zip mouth on shark
An old zip works perfectly for his pointy little teeth
Powertex shark on base
The black metal base makes the perfect base for this powertex sculpture

The sea bed can be an eerily beautiful setting. Mixed media was used to create this under water 3D canvas.

The eerily beautiful seabed that is home to my shark

The illusion of the sea was created by using a mixture of blue and white Powertex Fabric Hardener sprayed with blue bister. I created the spiky coral by soaking Powercotton in transparent Powertex fabric hardener. Shells that are not conventionally pretty added the finishing touch.

Beware of Beautiful Powertex Mermaids

Powertex mermaid by Donna Mcghie
I used bits of lace and paperdecoration to add texture

Many legends and myths are connected to the sea. One of the most enduring myths is that of the mermaid.

My mermaid canvas was created by swirling blue and white Powertex fabric hardener onto a canvas. Bister was then added and blasted with a hair dryer.

My mermaid started to take shape when I poured green Powertex fabric hardener to create the shape of a tail.

I mixed Powertex terracotta and white fabric hardeners together to create a flesh tone, whilst Yellow ochre fabric hardener worked well for the hair.

Davy Jones’s Locker

There are many versions of who Davy Jones was, and just as many theories as to just how he ended up lurking at the bottom of the sea.

Maybe he was seduced by the beauty of a passing mermaid. Her beauty having lured him down to the murky depths below.

Powertex under the sea
My Davy Jones sports a jacket I spied in a charity shop, soaked in Bronze Powertex Fabric Hardener

Our facebook page The Powertex Studio is a great place for ideas and motivation. You can also inspire others by sharing your own makes.

You can also see more of my work and find out about my workshops on my website www.artandmurals.co.uk.

My last month’s blog was inspired by the artist Vincent Van Gogh

That’s all for now. As this is an inspiration blog I have not done step by steps, but if you would like more detailed instructions I am happy to provide them. Please leave me a comment below if you like what you see, and remember to take care, especially when swimming in deep water.

After all, you never know what is lurking beneath.

Powertex Moulds

Fossil Mixed Media canvas art by Anna Emelia Howlett

In May the Product of the Month is silicon moulds. Powertex UK have a range of highly detailed silicon moulds for adding dimension to your mixed media art and crafts. Use with a Powertex and Stone Art mix for easy air drying clay. From tiny ammonite fossils, to flowers and leaves to extra large egyptian heads, take a look at the full range here. Don’t forget, when used with Powertex or Easy Varnish your pieces are also weatherproof and suitable for outdoor projects!

Powertex UK Fossil Ammonite mould

The Design Team using Powertex Moulds

Here are some examples of work using Powertex UK moulds by the design team.

Mixed media canvas with fossil ammonite mould and textures by Anna Howlett
Mixed media canvas with ammonites by Anna Emelia Howlett
Mixed media canvas with fossil ammonite mould and textures by Anna Howlett
Textured fossil canvas by Anna Emelia Howlett
Layered flower and leaves from Powertex UK moulds by Annette Smyth
Layered flowers and leaves sculpture by Annette Smyth
MDF plaque with Powertex and embellishments by Annette Smyth
Powertex plaque with flower embellishments by Annette Smyth
Mirror frame with Powertex and fossil ammonite embellishments by Donna Mcghie
Mirror frame with fossil detail by Donna Mcghie
Wonderland inspired mdf Powertex project by Donna Mcghie
Stone Art flower details by Donna Mcghie
Seascape with Stone Art Clay ammonite fossils by Jinny Holt
Seascape with Stone Art ammonites by Jinny Holt
Bottle vase with Stone Art embellishments by Jinny Holt
Curved bottle vase with Stone Art clay flowers by Jinny Holt
Ocean inspired journal with fossil ammonites from Stone Art Clay by Shell North
Journal cover with ammonite fossils from Stone Art clay by Shell North
Decorated picture frame with Powertex stone art clay flowers by Shell North
Picture frame with flower details in Stone Art clay by Shell North

Using moulds is a lovely way to use embellishments in your project. Because you have the mould you can make as few or as many pieces as you need and you can apply them while soft to curve around your surface like on Jinny’s bottle. You can also change the colour easily and Stone Art clay is very easy to work with.

If you like the look of the flower moulds you might want to take a look at this beautiful flower girl project by Anne. You can find the whole range of Powertex UK moulds here. Don’t forget to pick up some Stone Art while your there!

Powertex Flower lady with flower detail by Anne Waller
Detail of Flower Girl by Anne Waller