Rusty letter art

The Secret Art Box – August 2019

Designer – Kore Sage

The August Secret Art Box included a personalised initial in mdf, a stencil, papers, a quote stamp and textured fabrics. Also Lead Powertex fabric hardener and colour pigments were in Aqua ink and Blue Bister granules. There was so much in the box to use but I knew straight away that I wanted to use Rusty Powder with the mdf, ink and Bister to create rusty letter art.

Powertex UK secret art box august 2019
Powertex UK Secret Art Box August

Materials list

  • Tag
  • Lead Powertex Fabric Hardener
  • Printed papers
  • Pieces of fabrics
  • Mdf letter
  • Aqua ink spray
  • Bister granules
  • Powercotton

Optional and other supplies

Powertex Rusty Letter wall art
Rusty Letter Art by Kore Sage

1. Make a start

Step 1
Step 1

Laying down the first textures with printed papers and Lead Powertex Fabric Hardener to cover the canvas.

2. Create background textures

Step 2 Easy Structure
Step 2

Use Easy Structure with a plastic palette knife through the stencil. Clean your stencil straight away.

3. Build fabric layers

Step 3 adding fabric with Powertex
Step 3

I added fabric textures to build up a background for the mdf letter. Lead Powertex hardens and adheres the fabric. Use a hairdryer to dry.

4. Add mdf letters and shapes

Step 4 Adding MDF with White Powertex
Step 4

To create depth I used White Powertex to paint and glue the mdf letter and shapes. I painted it lightly over most of the background. Dry with a hairdryer.

TIP: Ivory Powertex Fabric Hardener will also work well if you don’t have White.

5. Spray Aqua ink

Step 5 Spray on Aqua Acrylic ink
Step 5

Spray the Aqua ink generously over the textures, let it pool, drip and run off to the side.

6. Add Rusty Powder

Mix up 1 tbsp Transparent Powertex with a little white vinegar and 1/2 – 1 tbsp Rusty Powder. Pour onto the letter, background and fabrics. (It will look grey and the rust will take a few hours to form.)

TIP: For a thicker rust mixture add 3D Sand or Small balls

7. Using Bister granules

Add spots of Transparent Powertex and sprinkle Bister granules onto wet areas. Spray with water and vinegar spray so the colour runs.

TIP: Using white vinegar in the water spray alters the colour of the Bister and encourages the rust.

Step 6 Sprinkle on Blue Bister granules
Step 6 and 7
Step 7 Rusty Powder
Step 6 and 7 rusted

Powercotton vines

Step 8 Powercotton
Step 8

I used Powercotton strands coated with White Powertex to look like vines around the letter.

Brush up highlights

Step 9 White Powertex Highlights
Step 9

White Powertex is dry brushed on highlights over the whole canvas using a flat brush.

Finishing touches

I repeated the Rusty Powder and Bister granules until I was happy with the contrast. Highlighting with White or Ivory Powertex at the end just lifts the letters away from the background. You can layer up as much as you like.

Powertex rusty letter art by Kore Sage
Powertex Rusty Letter Art by Kore Sage

There’s so much left in the Secret Art Box I’ll be making more with these supplies. Tutor Gill has also used this month’s subscription box here.

Keep an eye on The Powertex Studio and my Facebook Page where I’ll be posting my Powertex art. Join us at Powertex Addicts United where you can share your makes.

You can find all the details on the Powertex UK website for your own Powertex subscription box, along with many of these supplies.

Until next time, make some time to let your art out,

Kore x

Mixed Media Rusting Techniques

You have probably guessed that we LOVE mixed media rusting techniques. And what better way to achieve these than with rusty powder from Powertex!

You can see some great rusty images here and there have been some excellent articles from our fabulous design team recently.

Here I am sharing the manufacturers instruction sheet with you, have fun and enjoy experimenting!

Keep Powertexing! Tracey x

Mixed Media Rusting techniques
Rusty Powder Techniques

Rusty Powder

Powertex UK Rusty Powder

Rusty Powder -February – Powertex Product of the month

This month the team at Powertex Uk have picked rusty powder as their product of the month! Read on to find out how to mix it and see some examples of work with the rust effect created with this product.

How to mix


You can mix the powder with Powertex or Easy Structure and spread with pallet knife or brush. Next you need to spray a mix of water and vinegar on the wet surface. You can then repeat this as much as necessary. Next step is letting your piece dry for 24 hours or longer because this allows the rust process to take place.

How to create a coarse paste

You can obtain a rust paste by mixing Easy Structure with the Rusty Powder and a dash of vinegar. The other thing you can do is mix Powertex with 3DSand, the Powder and a dash of vinegar. This results to a coarser paste and a rough rust effect. 

 

Powertex rusty Powder art by Tracey Evans
Gorgeous Powertex rust by Tracey Evans
rusty art doll by Tracey Evans
Rusty Art Doll by Tracey Evans
Rusty textures by Tracey Evans
Close up of texture and rust created with Powertex by Tracey Evans
Powertex art with Rusty Powder by Tracey Evans
Powertex and rust by Tracey Evans
Powertex art
A gorgeous textural canvas by Sam Butler
Powertex rusty cogs steampunk by Annette Smyth
Fabulous Steampunk clock by Annette Smyth
thumbnail_20180929_150831.jpg
Beautiful rusty wings canvas
by Shell North @thecraftylittlecorner.co.uk
Fi Potter
by Fi Potter for Mixed Up Creative

We hope you have enjoyed seeing pieces created by the team. Enough so that it inspires you to have a go! Join us over on Facebook in The Powertex Studio and share your makes. Until next time.

Butterfly dreams of Powertex

Have you noticed an animal theme this month with Abigail’s adorable elephant and Donna’s beautiful afghan hound? Hi it’s Kore here with my August blog. So how about a butterfly? I know, it’s an insect really but it’s a beautiful creature that needs celebrating! I live in a busy city and don’t see too many butterflies but I have lovely memories of Buddleia bushes full of Red Admirals and Peacocks. The wonderful thing about this butterfly is that it can be made with whatever materials you have and what ever size you like for home or garden.

 

Creating the base

Make wings from wire and foil or cut them from thick card. Masking tape is great for covering foil. I made the body from some rolled up foil and taped this too. Rolled up paper would work too. A quick look on the internet for a template was helpful with the shape. Then the Powertex came out!

Using bright Powertex 

I used Red Powertex because I wanted to experiment. There are no rules here. Use what you have to cover the wings and the body pieces. I cut pieces of cotton fabric, massaged in some red Powertex and wrapped these around the body and wings until they were all covered on both sides. It was fun to create lots of texture in the wings and make ragged edges.When the parts were covered I used pieces of fabric in Powertex to attach the wings to the body. I tucked a couple of wire antennae into the body too.

Decorating the butterfly

This where you can get really play with your favourite materials. Use what you have to add texture and colour. I covered the “back” of the wings with a mix of red Powertex and Rusty Powder and small balls. It’s one of my favourite combinations and the red gives the rust a lovely warm glow.

Try this:Spray Bister through stencils or allow it to “puddle” in the texturesSprinkle small balls or sand onto wet PowertexUse Easy Structure to create lines and shapesSprinkle Bister granules onto wet Powertex for little shots of intense colour and textureSplatter acrylic inks and paints

There are so many ways to add colour but I was really happy with using Bister sprays on my butterfly. I chose Red and Yellow and sprayed generously to let the colour run around in the textures. I also used the brown Bister to paint circles onto the back of the wings. I also used some acrylic inks from The Secret Art Loft at Powertex UK. I let Viola ink just run all over it. Let it dry!

Decorate both sides of the wings using your favourite products. The wings are a great place to try something new. This is where it’s fun to have no plan! I really enjoyed just playing and if I didn’t like something I either wiped it off or painted over it!

Final touches

Adding the last highlights is really fun with Powertex. I dry brushed with orange and yellow ochre pigments in Easy Varnish first. I chose to highlight with Ivory Powertex and Limoncello metallic pigment which worked beautifully to add some sparkle.

Then a timely delivery of Metallic gold ink Powertex UK. I couldn’t resist adding some to my butterfly. It’s lush and rich and it’s going to be amazing for some autumn projects! A little on the wings and antennae for a finishing touch.

While I was waiting for one stage to dry, I took the chance to make a couple of tiny butterflies. I printed a couple of butterfly templates from the internet. I glued them onto card so I could cut out two sturdy little butterflies and then painted them with Powertex. I used less texture on these but still applied some rusty texture and then played with acrylic paints and metallic pigment powders.

The acrylic paints were in Blueberry Pie and Orange Marmalade and the pigments in Berry sour and Tequila sunrise. Gorgeous! The puddles of bister on the back of these is wonderful.

 

I think I’ll keep adding different textures and colour to these butterflies. Just when I think I’m done I have an idea to add something else! She’s a big butterfly too. When she’s finished, a coat of varnish (to fix the Bister) and she’ll be a lovely on an outside wall.

After a few days the Powertex will harden and fix your butterfly. In my pictures she’s still new and not hardened so I can move the wings. When you leave your butterfly to set I recommend propping up the wings so they can harden in your preferred position.

So pick out your favourite materials and decorate a butterfly. It’s time to let your art out!

If you would like to see more Powertex creations pop along to The Powertex Studio facebook group where you can share your makes too. Powertex Addicts United on Instagram has lots of inspiration from across the world.

You can also follow my Powertex experiments and projects @skysagestudio on Facebook and Instagram or find my personal Powertex blogs over at koresageart.com.

Until next time,
Kore x

So what do you do with your spare Powertex??

Hello there

I hope you are well and have enjoyed this lovely Summer.

So here’s the question……..

What do you create with the spare Powertex left in your tub?

You know that little bit you have left when you’ve been slightly too generous with yourself when you’ve been pouring out….

Here are a few of the things I use it for.

1. Coat a spare piece of fabric and a plaster embellishment and create a brooch.

These can either be coloured or left as the base colour so that you can colour them to fit into your future project.

2. Coat a spare piece of fabric, scrunch it up and let it dry.  You now have somewhere to try out your dry brushing colours before going onto a finished piece.  This is great if you want to try something a little different to your normal colour choices.

3. Take a strip of fabric, coat it with the Powertex and roll it into a flower.  Once dry these can be added into a future project.  Again these can be dry brushed at a later date to fit in with your project.

4. Mix it with Stone Art and create a clay,  double wrap this in clingfilm and store in a sealable bag or box and this will last for several weeks.  Alternatively sculpt it into a freeform shape or use it in the moulds to create embellishments.  Again these can be kept until you need them.

 

5. Create a Powertex mask.
Either let the Powertex set in the container or pour it out onto a non stick mat creating a more controlled design.  Leave to set then peel off.


These can be added into projects to give even more layers and textures.

Here the Powertex was left in a round tub and gave a lovely curved effect to sit the skull into.

6.  Take some of your MDF embellishments, coat them with Powertex and apply Rusty Powder, spray with vinegar mix and leave to dry.  You then have ready rusted embellishments at your disposal


I bet you have other ways of using your Powertex,  why not hop onto the Powertex Studio facebook page and share your ideas with everyone.

Until next time happy Creative Adventures

Annette  x

Powertex meets the Raven and the Rusty Pocket Watch

Hi it’s Kore here with my March blog. I’m so excited about the fantastic Alice in Wonderland theme this month! They are brilliant stories with extraordinary characters and everybody has a favourite quote. “Tea-time?” or “I’m late” or “Why is a raven like a writing desk?” which is my favourite!

Powertex pocket watch with Rusty Powder

The white rabbit is pretty important to the story and I’m using the Pocket Watch Kit for my project and a totally irresistible pot of Rusty Powder. I love the colour and texture of Rusty Powder and it’s slightly unpredictable results. I like mixing the recipes, like playing mud pies as a kid. A little mud, a little water, a little grass for texture, perhaps a worm! Maybe I was warming up my Powertex skills back even then. Wonderful, messy, arty, crafty chemistry.

My ingredients this time:

Powertex March Project Pack Watch

 

Pocket Watch Project Pack
including Ivory Powertex
Black Bister granules
Blue Bister granules
3d sand
3d balls small

And:
Transparent Powertex and/or Easy Structure Paste
Rusty Powder
Transparent Acrylic Inks in Aqua and Viola
Distilled vinegar and small spray bottle
Easy Varnish
Colortricx in Bronze Gold

Optional:
Drop outs mdf
Raven mdf

Powertex pocket watch layout
Step 1: Figuring out how it could fit together.

 

Pocket watch sprayed with Bister
Step 2: Preparing the pieces. For brighter colours coat with Ivory Powertex first. I used Blue bister granules mixed with water to make a spray. I also used some Aqua Transparent Acrylic Ink and varied these over all the mdf pieces. I want some of this colour to show up.
mdf cog and Rusty Powder
Step 3: Mixing up Rusty Paste. When the colour is dry, mix up some Rusty Powder with some Transparent Powertex, or Easy Structure Paste is good too. The recipe is key to a good rust. The more Rusty Powder you add, the darker your rust will be. Don’t forget to add a little vinegar, that’s what makes the magic happen. I add some 3d Sand for texture too. Have some 50/50 vinegar and water spray ready. Apply the mixture partially over your pieces and then spray with vinegar/water. Leave it to rust overnight.
Pocket watch pieces with Rust
When it’s dry you can repeat this step for extra texture or rust colours. It’s great to layer different stages and textures of Rusty Powder.
Fabric pieces with Rusty Powder

 

I used my leftover Rusty Powder paste to paint these fabric scraps. I also left my plastic mixing plate to dry. The dried rust mixture can be peeled off and used in my mixed media canvases. Gorgeous!
Powertex pocket watch with Rusty Powder

 

Step 4: Putting it together. Once my pieces were dry I put them all together, roughly like my layout. I used Powertex to stick the pieces down. I wasn’t worried about any drips or splodges, it all adds to the texture.
I used some tiny mdf shapes from the Drop Outs mdf pack to raise up some of the numbers from the frame and I’ve included a piece of that rusty fabric on the heart. I’m really loving all these layers! While rooting through my Drop Outs I found these fantastic little spirals and decided to include them. They look like little question marks!

Step 5: Make your watch stand. This is a good time to stick your mdf watch stand together too. Slot the pieces together and paint over the pieces and joins with Ivory Powertex. Leave it to dry.
Powertex pocket watch with Rusty Powder

Step 6: Adding another rust layer. I mixed up another Rusty Powder but this time my recipe was Easy Structure Paste and 3d small balls. and a little vinegar. I wanted a sloppy paste that would drip. You can add sand to make a thicker paste.

Add some Rusty Powder mixture to your watch stand and sprinkle over some black and/or blue Bister granules to add textures. Spray your Rusty areas with your vinegar/water spray. Use Bister sprays to colour some parts.

 

Powertex pocket watch with Rusty Powder and Inks

 

Step 7: Adding colour with Inks. Once all my rust layers are dry I love to add more colour and the Transparent Acrylic Inks are brilliant for this. They tint the rust a little and are fluid enough to run around all the textures. I used Aqua and Viola and a couple of sprays of Black and Blue Bister. Oh that’s better!

 

Powertex Mdf Raven
Step 8: Adding embellishments and hands. The last stage is to add the remaining embellishments. I’ve chosen an mdf raven as well as the butterflies, dragonfly and clock hands. I coat them with Acrylic Inks in Aqua and Viola. Then add a spray of black Bister to the raven and blue Bister to the butterflies. The clock hands are painted with Ivory Powertex so they stand out.
 The watch face is looking very dark so before I add the embellishments I use a little metallic dry brushing over the numbers. For this I mix Bronze Gold Colortricx pigment with Easy Varnish. This will make the last pieces stand out more. A little Ivory Powertex would also look great for highlights.

 

Powertex Pocket Watch March Project Pack
Final touches: I stick the last pieces into place with Powertex and wait for them to dry before fixing the watch to the stand.

 

 

There are lots of gorgeous textures in the project pack to make this pocket watch your own. What colours would you use with your Rusty paste? There’s still time to get yours and show us your creation for the March Powertex Challenge.
You can enter your Alice in Wonderland themed creation into our monthly challenge over on Instagram. Check @PowertexAddictsUnited for details. Not on Instagram? Join The Powertex Studio group on Facebook to share your makes and catch the latest news and inspiration.
You can also follow me and my Powertex experiments and projects @skysagestudio on Facebook and Instagram.
Until next time, make a little space and let your art out!
Kore x

 

Time flies by Annette

Hello Everyone

I hope you’ve kept yourselves safe in the recent bad weather and have used the time to get an extra bit of Powertex play in.

This month I’ve used the new Powertex UK Pocket Watch Project Pack to create a birthday card with a difference.  I’ve made it for Granny Smyth at the age of 75 but you could create this for any age and just move the hands to different positions and use different numbers.

I hope you have fun and remember to post your makes on the Powertex Addicts United Facebook page, you know we love to see what you create.

 

To complete my piece, I used the kit along with texture paper, Rusty Powder , Yellow BisterEasy Varnish and pigments.  I mixed my bisters with a 50/50 solution of white vinegar and water to make the colours pop.

Start by laying out the pieces to see which ones you want to use.  The photograph is a laser copy cut to size.

Take a piece of textured paper and draw around the inner circle, cut this out and place to one side

Now coat the front of the base of the watch with Ivory Powertex and stick the texture paper to the centre. Attach the front of the watch to the back (you may need to add a little more tex around the edge then coat the front with the Ivory Powertex also.

Now spray with the blue and yellow bister mixes
and dry with a hairdryer.

When dry turn it over onto a clean work surface and coat the back with Ivory Powertex, I then used and old credit card to add texture by lying it flat on the surface and lifting it up (bit like making your snow peaks in royal icing).  Spray with the blue and yellow bisters and dry with a hairdryer.  By raising the base from the table whilst doing this step, it will help to stop any stray colours from seeping onto the front.

 

When dry use a slightly damp sponge to remove the excess colour from the watch.

I choose to colour my embellishments separately.  Coat them all with a layer of Powertex Ivory.

Randomly add extra Ivory then drop on some Rusty Powder and spray with the bister mixes, leave to dry on one side.


You can keep spraying these with pure white vinegar to get the rust to develop further.

These pictures show the cogs,  I repeated the same process for the other embellishments (except the heart) varying the amount of rust and colour I added.

For the heart, I painted a layer of Easy Varnish over the front of the photograph, by holding the paper taut whilst it dries it doesn’t wrinkle,  once dry repeat on the rear.  Now using the heart as a template cut out the photograph and using the Easy Varnish attach it to the heart and coat with several layers of varnish to seal it.

 

Place a small amount of Ivory Powertex into a pot, sprinkle on the
Rusty Powder then spray with the bister mix.  Now stir


Using a paint brush apply this around the photograph then sprinkle on more Rusty Powder and spray with the bister mixes.  As you can see the bister will wipe away from the photograph as you have previously sealed it with the varnish.  Again spraying with more vinegar as it dries will encourage the rust to form.

Now add all the embellishments to the base using Powertex, make sure you clean up any excess as you go,  I used some of the spare pieces in the kit to support the heart in the centre.

When it was all dry, I used a combination of Bronze Gold, Copper and Silver pigments to add a little sparkle.

I hope you have great fun creating your own Pocket Watch and until next time Happy Creative Adventures

Axx

Dotty about you!

Well, I know we’ve only just got through Easter but summer will soon be knocking on the door and reminding me of the days when as a child we would spend our summer holidays in Devon at my Nans. I think my favourite outing aside walking along the river Otter to Otterton Mill for cream teas and yummy swizz roll was the Ladram bay beach trips.

We would pack up the picnic basket and set off early. The whole day was filled with beach fun! Playing in the rubber dingy with my sisters and shrimping in the rock pools. Looking for the crabs, starfish and wonderful fishy creatures lurking under the rocks.

I have to say I never did manage to spot a sea horse. But they are rather lovely don’t you think?

Which leads in nicely to my latest project that I am happy to share with you all, you lucky things! I decided to go a little crazy and use two colours on this piece. I was going to use some ivory too but I thought better off it and tried to keep it a little simpler.
Top tip: Always give yourself an idea of layout and where you are going to place your items. I always take a picture of  the layout on my phone as a reminder. However, this is not mandatory and set in stone, sometimes I completely change my mind on layout once I get going.
 
I wanted to make sure I added some kind of texture underneath the circles. So I gathered together all sorts of lace, corrugated card, wall paper, scrim to name but a few and started putting them in place to have an idea of where I wanted them.
Next I removed all circles and got the base prepped with texture and colour. Blue Powertex for the top half and green for the bottom half.
So you may be able to spot on his belly I used my circle stencil and structure paste. I also used the arty quotes stencil in places but got a bit excited with some other texture and covered most of it up. But I’m ok with that. There really are no rights or wrongs or mistakes with Powertex, it’s all about play, fun and going with the flow.
Next I put all the circles and flowers back into place and gave them a coat of Powertex.

Top Tip: If you mix a little sand in with your powertex and gently brush over certain areas of the raised circles it adds a little texture and extra detail when dry brushing.

Then it was dry brushing time. I used yellow ochre powercolor along the neck, back and tail.Then popped on a little gold colortrix. For the front I mixed dark blue and pale yellow powercolour and added white for highlights with a touch of pearl colortrix for a little shimmer. And voila!
The mdf seahorse bases are available to buy at http://www.powertex.co.uk. However, I am afraid you are going to have to wait for the circles to be released on Hochanda on the 9th June. Sorry about that. But it’s sure to be a great show I promise! I know what a tease, right. On the plus side you get to watch me on my Powertex tv debut! I know exciting right. Eeekkkk…not long now! Lucky I will be with our Tracey. Have we got some cracking stuff to show you!
Toodle pip Anna xXx