Mixed Media Rusting Techniques

You have probably guessed that we LOVE mixed media rusting techniques. And what better way to achieve these than with rusty powder from Powertex!

You can see some great rusty images here and there have been some excellent articles from our fabulous design team recently.

Here I am sharing the manufacturers instruction sheet with you, have fun and enjoy experimenting!

Keep Powertexing! Tracey x

Mixed Media Rusting techniques
Rusty Powder Techniques

Inspiration for an Artwork

Texture inspiration

Where to find Inspiration for an artwork

I am often asked where I get my inspiration for an artwork from. Well mostly the answer is, “it’s all around me”. Because I see inspiration when I’m out for daily walks with my camera. It might be in nature, in architecture, in the many working environment. In the weather, the clouds, a sound, a smell, a texture or a chance conversation. So these are all things that spark ideas in my head which lead me to the creation.

The images below were all taken within 20 minutes of one of these walks. I have worked in my day job for 8 years and never noticed this door before, but the light on that day was so bright that it drew me in. Just look at all that detail in the texture, layers of paint, rust and dust.

A hopper door that has lots of texture, years of dust, rust and layers of colour
Hopper Door – Look at the texture!
Layers of paint, rust and texture in a recessed door handle. Inspiration for an artwork.
Rusty inset door handle

Rusty Inspiration

The detail in this image is perfect for using Powertex Rusty Powder with lead and yellow ochre Powertex to recreate a rusty element.

This measures around 15cm x 10cm on a door that is around 6 meters high.

When you’re out and about be mindful, look out for the detail as well as the bigger picture. You never know what you might find to inspire a new piece of work especially a Powertex project! .

The image on the right is the bottom edge of the door in the first image.

Look at that luscious texture and rust. The tongue and groove in this piece have given me an idea for the base of my next Powertex project, can you guess what it will be?

All three of these images have inspired and will play apart in my March Powertex project.

Bottom edge of door with hinge and rust and lots more texture. Inspiration for an artwork.
Bottom edge of door with hinge and rust
Oak boule with deeply textured bark
Oak Boule with bark

This final image was also captured on the same day and is the deeply textured bark on an oak boule.

For those who don’t know and I didn’t until last year when these started appearing in our timber yard, a boule is the whole tree trunk that is cut into planks.

This too will play a part in my March project.

What will my inspired artwork be?

So have you guessed what my March step by step Powertex project will be? Can you guess what Powertex products I am planning to use to re-create these wonderful textures and colours? If you have an idea then why not leave a comment below. You might think of something I haven’t!

I hope you found some inspiration for an artwork in this article. Keep ‘texing and pop back in March for the finished step by step project. Looking for more inspiration. Do have at my look last project for more inspiration, which you can find here.

Bye for now, Fi

The White rabbit’s watch

 
                    If you see the White Rabbit please tell him I’ve found his pocket watch! 


 I’ve used the ivory Powertex to stick and paint my March project pack together and sprinkled on sand and balls to give some amazing texture.
Then I sprinkled some of the black bister crystals onto my work where I wanted some real depth.  I diluted my blue and green bisters and put them into spray bottles I gave everything a really good spray, this diluted the black crystals and it seeped around the textured areas just as I had hoped.
When everything was dry I mixed some rusty powder with some vinegar, sand and ivory Powertex and used an old brush to apply this where I wanted my rust. Over the next 24 hours I resprayed the watch with a vinegar and water mix to reactivate the rusting effect. When I was happy with the rust I left everything to dry and brushed on Powercolor and Colortrix pigments mixed with Easy Varnish to accentuate a few areas and add some metallic elements.

 

 

I hope you like the results!
Thanks for looking, Traceyx

Dotty about you!

Well, I know we’ve only just got through Easter but summer will soon be knocking on the door and reminding me of the days when as a child we would spend our summer holidays in Devon at my Nans. I think my favourite outing aside walking along the river Otter to Otterton Mill for cream teas and yummy swizz roll was the Ladram bay beach trips.

We would pack up the picnic basket and set off early. The whole day was filled with beach fun! Playing in the rubber dingy with my sisters and shrimping in the rock pools. Looking for the crabs, starfish and wonderful fishy creatures lurking under the rocks.

I have to say I never did manage to spot a sea horse. But they are rather lovely don’t you think?

Which leads in nicely to my latest project that I am happy to share with you all, you lucky things! I decided to go a little crazy and use two colours on this piece. I was going to use some ivory too but I thought better off it and tried to keep it a little simpler.
Top tip: Always give yourself an idea of layout and where you are going to place your items. I always take a picture of  the layout on my phone as a reminder. However, this is not mandatory and set in stone, sometimes I completely change my mind on layout once I get going.
 
I wanted to make sure I added some kind of texture underneath the circles. So I gathered together all sorts of lace, corrugated card, wall paper, scrim to name but a few and started putting them in place to have an idea of where I wanted them.
Next I removed all circles and got the base prepped with texture and colour. Blue Powertex for the top half and green for the bottom half.
So you may be able to spot on his belly I used my circle stencil and structure paste. I also used the arty quotes stencil in places but got a bit excited with some other texture and covered most of it up. But I’m ok with that. There really are no rights or wrongs or mistakes with Powertex, it’s all about play, fun and going with the flow.
Next I put all the circles and flowers back into place and gave them a coat of Powertex.

Top Tip: If you mix a little sand in with your powertex and gently brush over certain areas of the raised circles it adds a little texture and extra detail when dry brushing.

Then it was dry brushing time. I used yellow ochre powercolor along the neck, back and tail.Then popped on a little gold colortrix. For the front I mixed dark blue and pale yellow powercolour and added white for highlights with a touch of pearl colortrix for a little shimmer. And voila!
The mdf seahorse bases are available to buy at http://www.powertex.co.uk. However, I am afraid you are going to have to wait for the circles to be released on Hochanda on the 9th June. Sorry about that. But it’s sure to be a great show I promise! I know what a tease, right. On the plus side you get to watch me on my Powertex tv debut! I know exciting right. Eeekkkk…not long now! Lucky I will be with our Tracey. Have we got some cracking stuff to show you!
Toodle pip Anna xXx