Upcycled Powertex pot

Designed by – Anna Emelia Howlett

Upcycled Powertex Pot by Anna Howlett

If you saw my shows with Powertex UK on HOCHANDA on May 3rd at 12pm and 4pm you would have caught my water pot. Made from my mum’s giant yoghurt pot I felt it was only fair to gift it to her. I hope you felt inspired to make your own upcycled powertex pot. Here are some tips and a materials list for how I made mine.

Materials

Stone art clay ammonite fossils
All pearl pigments from the party pearls pigment tray were used on the fossils to make them pop.

What to use to create an upcycled Powertex pot

Don’t forget Powertex can do many things. It acts like a primer, glue and paint. It will harden most fabrics and textiles. If you would like them to be water resistant you need to use fibres with at least 80% cotton in them, then cure for 3 weeks. For my upcycled Powertex pot I used black Powertex fabric hardener on different fabrics and textiles to cover the pot. Coated the mdf starfish with a mixture of black Powertex, 3d sand and balls. I created some stone art clay, pressed into the new super cute fossil moulds and stuck down with Powertex.

Dry brushing with White Powertex
Dry brush white Powertex on the black Powertex to pick out the detail.

How to make your pearl pigments pop

Leave your black base layer to harden by leaving to dry, either in the air or with a hair dryer. Then use the new White Powertex to dry brush over the top because this helps to bring out all the texture in the materials. It also gives a base for your colours to lie on top of. The pearl pigments are translucent and this technique allows them to show up and pop on a black base. This is because you’ve put the white layer down over the black.

Using pearl pigments to highlight
Pearl pigments

Share your upcycled Powertex pot with us

These make super water pots or plant pots. Why not give it a go! And don’t forget to share your makes in The Powertex studio, I love knowing I’ve inspired you to create your own works of art. Please leave a me a note in the comments if you have found this article useful. You can find me at Rosehart Studio. You might also be interested in my mixed media canvas project. Toodles Anna xXx

Upcycled Powertex Pot by Anna Howlett

Powertex Ammonite Light

Powertex Ammonite Light

Designer:  Jill Cullum

My Inspiration for an under the sea light

This article is very much influenced by my love of the beach. I spent several years with the beach on my doorstep, where I regularly enjoyed early morning walks. And was the inspiration for my Powertex Ammonite Light.

I particularly loved the changing moods of the sea, the smells and a chance to blow away the cobwebs.  I’ve chosen fabrics and materials which resemble netting and rocks. Paper deco works very well here.

I have also used some shells which I have added extra colour to. You can always leave these natural though.  The Powertex stand gave the finished piece some weight, as well as structure and height.

TOP TIP – Have a hair-dryer ready when adding the Ammonites. You will need them to stay in place so that they have space to poke the lights through. This also gives more 3 dimension to your piece.

Materials Used

I chose my materials, cardboard, and embellishments from my stash which included sea shells. I have used sand and 3d ball to create a thick texture for my ammonites, giving them an authentic look.

Building the basic form for the Powertex Ammonite Light

Step 1

Using the stand a base add tin foil to create rocks and shape, covering with masking tape.

Adding detail

Powertex Ammonite Light
Step 2

Step 2 – Added more texture using some honeycomb effect cardboard packaging. Hold in place with masking tape. Cover with fabric hardener. Creating texture for the ammonites.

Creating texture for the ammonites

Step 3

Mix black fabric hardener with sand and small 3d balls. Use this to cover the mdf ammonites. Put to one side until dry.

Bringing the ammonites to life

Powertex Ammonite Light
Step 4




Step 4 – Once dry use Secret Art Loft pigments to colour the ammonites, using the dry-brushing technique.. 

Building more structure

Step 5

Add height and detail using material dipped in green fabric hardener. Blend it over the ‘rocks’ adding height to your form.

Putting the elements together

Powertex Ammonite Light
Step 6

Before the fabric dries, add your ammonites (see top tip above). Add paper deco placed over the ammonites, using blue fabric hardener, for extra detail.

Powertex Ammonite Light

Finishing Touches

I decided to add colour to the sea-shells using Secret Art Loft acrylic paints, before dry-brushing to bring out the texture. Finally I added the fairy lights.

Why not take a look at my last article here, on how to create pastel shades with fabric hardener.

We love to see what you make, so please share your creativity here, at The Powertex Studio.

I hope you have enjoyed this article and that it inspires you to create your own nightlight. A garden theme using wings and flower embellishments would work well too. Looking forward to seeing your own take on how to use fairy lights, bye for now, Jill x


Powertex Stone Art Hares

Powertex Stone Art Hares – Some bunny loves you

Designer: Anna Emelia Howlett

powertex stone art hares

“The March hares danced and leapt around as the moonlight shone golden on the lush Spring ground” by Claire Ivins

The Secret Art Box – March

I feel very privileged to be able to get my hands on a Secret Art Box. Who doesn’t love opening up a box of Powertex arting and crafting goodies and getting a complete surprise? I believe part of the excitement and challenge lies in that surprise. And I got super excited by the idea of Powertex Stone art hares.

I sometimes look at the box and really wrack my brain as to how I am going to deliver an end result I am happy with. Because of this I tend to sit and procrastinate a bit. Yes, I am an over analyser, who likes to think before I get to an end result.

Don’t think just do

Don’t get me wrong! Sometimes I dive straight in, I’ve been practising for a while now to just get on and keep it simple. But if you ever feel like you hang back a bit, know you’re not the only one. You’ve got this. And I’ve created a project here to help you find that inspiration. So the most important thing is to get that Powertex out and have a go! Don’t think, just do.. join in and create your own Powertex stone art hares.

Marchs The Secret Art Box

Idea behind the design

I really like the idea of a mumma and baby hare here. So I thought this would make a great mothers day present. So that’s where I drew my inspiration for my project. Because I couldn’t think of a better way to say I love you than with a homemade Powertex Project. So why not set aside some time to make some one special a little present. I know I’d love to receive these Powertex stone art hares. Wouldn’t you?

powertex stone art hares

Materials list

Step one

Gather together your items. I’ve taken the base for the moon to use in this project. You will also need moulds and stamps.

Step two

Using the bronze Powertex as a primer or paint. Coat the moon base, large and small hare in one layer of Powertex.

Step three

Pour out ¼ of Powertex from your 100ml bottle. Mix a couple of spoonfuls of stone art powder in and create a bread dough consistency clay.

Step four

Paint Powertex on, pat in stone art. Repeat to build layers. Spray with brown bister. Place clay on hare, stamp and use medium heart plunger.

Step five

Use small heart plunger in clay. Place nose on with dab of Powertex. Use remainder clay in moulds and glue in place with Powertex.

powertex stone art hares
Step Six

Dry brush with pigments and varnish. Pigments used are Mocha, white, coral, yellow ochre, lilac and rich gold.

powertex stone art hares
Step seven

Finishing touches

After putting all the elements together and letting dry for a couple of hours. I then dry brushed my piece. In order to get a shabby chic, chalk finish on this piece, I was very light handed and made sure there was less varnish to pigment ratio. However, if you prefer a more gloss finish, simply use more varnish.

powertex stone art hares

Do share your makes in the Facebook group The Powertex Studio. If you like what you see press the star or let me know in the comments box below.

Did you catch my other Secret Art box article ‘moon gazing hare’, if not find it here. If you would like to see more of what I do you can find me at Rosehart Studio. Toodles Anna xXx

Powertex Moon gazing hare

Designer: Anna Emelia Howlett

powertex moon gazing hare

“The March hares danced and leapt around as the moonlight shone golden on the lush Spring ground” by Claire Ivins

The Secret Art Box – Powertex moon gazing hare

Have you seen the new craft subscription box from Powertex UK? It’s called The Secret Art Box. And the contents remain a surprise right up until the moment you open your box. With a different theme and variety each month, if you love Powertex this is the subscription box for you! This months Secret Art box had the theme of March hares, some of it’s contents enabled me to create a framed Powertex moon gazing hare.

powertex moon gazing hare
Stone Art was perfect for creating texture and depth on the moon and hare.

Packed full of Powertex goodies it will compliment your existing stash. You might even be challenged or find a product you haven’t used before. With inspiration from the Design Team and Guests you can’t go wrong.

The extra stars popped out of the mdf moon made a great addition to detail on the frame.

If you need extra inspiration you can pop into The Powertex Studio on Facebook and ask for advice. You will always find a friendly helping hand here. Don’t forget to share your works of art in The Powertex Studio so we can see what you have created!

powertex moon gazing hare

Or perhaps look on the Tutor directory on the Powertex Uk website. This is the place to find details of your local certified Powertex tutor. So you can contact them and book in on a workshop.
.


Sign up on the Powertex Uk website, where you can find a variety of offers on the Secret Art box subscription box. If you are a Powertex addict you should not be without one!

powertex moon gazing hare

I hope you found some inspiration from my Powertex moon gazing hare. Looking for some more inspiration from me with Marchs subscription box find it here.

Do click the star or leave a message in the comments box at the bottom of the article. We love to hear from you. Find me over at Rosehart Studio on Facebook to find details or message me about workshops. Toodles Anna xXx

powertex moon gazing hare
Brown bister from the Art box added extra depth to the hare.

February Secret Art Box

Newly trained certified Tutor Gill Goldsmith from Chatham, Kent just can’t get enough of Powertex! She was feeling the love this month with her The Secret Art Box, the new craft subscription box from Powertex UK. Here are some of the wonderful works of art she created with hers. Want to subscribe to The Secret Art Box? Find all the different options on offer by following the link here.

We love Powertex!

I was really excited to create with all the gorgeous things that arrived in this month’s Secret Art Box. February’s theme was LOVE and included red Powertex and hearts and cherubs.

I decided to make a frame, draped in fabric using all the gorgeous embellishments. So I started with the back of the frame and added texture with a stencil and Easy Structure. Easy Structure is a lovely thick paste by Powertex UK. It goes smoothly through stencils and leaves a really raised finish.

I then went on to drape the frame 6 x 6 inch frame with some old cardigan material that was quite lacy. And added the embellishments of hearts, corners, fabric and the cherub and then allowed this to dry thoroughly.

Next I worked more on the back ground of the frame, colouring with the Powertex, adding embellishments and the gorgeous plaster heart to the centre. Once everything was dry, the next day, I started on the colouring process.

Red Powertex before distressing
Red Powertex after distressing

Having a limited colour palette, I worked with dark green pigment and a brown spray paint to bring out the definition in the piece. I also used the same colouring on the frame.

Then highlighted, drybrushing, with the red lipstick pearl pigment and red acrylic paint included in the kit. I also added metallic highlights with gold pigment. I was very pleased with the final result.

Finished piece

I hope you have found some inspiration in my piece and have a go for yourself! Please do share your makes over on Facebook in The Powertex Studio. Take a look at another article using this months The Secret Art box here.

Join me!

You can follow my adventures on my new Facebook page The Powertex Port. I will be running my first workshops soon at St.Mary’s Island Community Centre, Chatham. Send me a message via my Facebook page for details. I would love you to come join me. Happy crafting Gill. x

Powertex Art Doll MDF Kit

mixed media powertex art doll using rice paper
There are no rules for these Art Dolls, other than have fun creating!

Where to start with an Art Doll

If I am completely honest, when I first opened my new Powertex Art Doll MDF Template I was a little bit daunted. I had never even heard of the term Art Doll before. And was a little bit worried that I would not be able to do it justice.

I got in touch with Tracey Evans at Powertex HQ. And asked her if there are any rules I should be adhering to when it comes to creating an Art Doll. Nope, she relied, no rules whatsoever.

Well, that was music to my ears. No rules meant that I could absolutely go to town with my rather bonkers imagination right? Right Tracey confirmed. Within no time at all, my reservations morphed into excitement.

This was going to be fun!

Art Deco Theme for inspiration

I started off by gently removing all mdf cut outs from the template. And having a bit of a play around with them.

I used some Transparent Powertex to fix the square frame together. And thought that this would fit nicely over one of the faces, available in the Powertex Rice Papers.

I had some gorgeous turquoise feathers that I had picked up some time ago. As soon as I played around with placing these on my design, a vague concept started to form in my mind. I was going to go Art Deco. I wanted my Art Doll to look like something you would stumble across whilst rummaging through an old attic.

How to start your Art Doll

Using the turquoise as a base for my colour scheme, I painted all my mdf pieces with white Powertex. I then took my oblong backdrop and poured small amounts of blue Powertex and yellow in dribbles onto it. Whilst this was still wet I then sprayed with blue bister and blasted with a hair dryer. This created an interesting texture on which to base my design.


mixed media powertex backdrop
Although very little of this back drop shows through on the finished design, I’m pleased I did it, as it set the mood for the look I was aiming for

I used the same technique for the frame for the face. However, I left the inside of this white so that I could stick on my face and it would show up nicely. (I didn’t want the face to look too pristine. So when I was dry brushing at the end I purposely added a bit of white to age the photo slightly.)

Mixed media rice paper powertex art doll
I deliberately added some white powercolour to help with the aged photo effect

I added the same face but smaller to the mdf shape, then adhered to the top of the oblong template. Next I added a shabby halo made of a scrap of gold coloured metal. To adhere everything I used Powertex Transparent Hardener. I wanted to add some interest to the wing shapes at the top. So I used the negative shapes from the template I had taken them from. This formed a stencil which I could spray some bister through.

bister stencils for powertex mixed media art doll
I also added on some real white feathers to add even more texture

I left all my mdf pieces overnight to dry and ensure they were securely adhered in place.

The next day I dry brushed using pearl white, white and copper powertex pigments to add to the ageing process.

My final step was to add on some of my beloved bling. Especially those gorgeous turquoise feathers which had been the inspiration for the Art Deco look.

Powertex mixed media Art Doll
My finished Powertex Art Doll

I honestly cannot say how much I enjoyed making this. Once I had put my fears to one side and embraced the freedom of just going for it.

If you would like to share your own creations, the Powertex team would love to have a look over at our facebook page The Powertex Studio.

Need more inspiration for your Art doll kit, take a look at some of the other articles from Design Team members to spark your imagination here is Abigail’s and Anne’s interpretation.

Thanks so much for reading.

I’m Donna and you can see more of my work over at www.artandmurals.co.uk

The Secret Art Box – February

The Secret Art box, Powertex, love projects

This months article brings you inspiration and projects to create using February’s The Secret Art Box. The new craft subscription box from Powertex UK.

“The love of my life opened my heart the warmth it let loose poured into my art” by Claire Ivins

*** You may not get an exact replica of this box, but similar items will be included ***

Powertex Secret Art Box Project One

I also gathered a few more supplies, wire, paper tape, tinfoil and a larger mdf heart shape.

I used the mdf heart shape to mould another from wire.

I used tinfoil to pad it out and create the shape I wanted.

Next came the making of the arrow. This is a thicker wire as I wanted it strong and sturdy.

I covered everything in masking tape.

Then I started to play around with some of the contents in the box.

I wanted to make a recess in the polystyrene heart for the plaster heart to sit in, so I drew round it.

And using a craft knife and a small pair of scissors, I dug out the shape.

I placed the plaster heart in the hole to try it for size.

 I painted it with a coat of red Powertex. Whilst still wet I pressed Stone Art powder onto it and rubbed it in, letting the excess fall off. The Stone Art creates a stone like effect.

Then I sprayed it with red Bister. This red is more of a mahogany colour, ie a deep red.

The Secret Art box powertex

I painted the heart and arrow shapes with the red Powertex and stuck the arrow on with it too. I cut out some of the polystyrene heart so it sat on the frame. I added the gold sequins from the January box. And also used rich gold pigment from my stash over some of the heart shaped frame.

And to finish I mounted it on one of the Powertex metal stands.

      

Some more close ups.

Powertex Project Two

I did the same for my next project and started off by creating a layout. This time I wanted to show different shades of red and different textures.

I sprayed the plaster cherub with the red Bister.

I used the red ochre and varnish to create a paste and painted the wings, and did the same with the rich gold on the hair.

I painted the large heart from my stash, and from the Secret Art box, the set of four hearts (including the one out of the middle of the biggest one), the smaller starburst shape, mini hearts and the wooden love word, all in the red Powertex.

This one I added strands of Power Cotton to the wet Powertex, painted over it and added the key whilst still wet. Once dried, I dry brushed with green olive pigment, which if you were lucky enough, was in the January subs box.

This one I sprinkled some of the small Powertex sand balls into the wet Powertex and dry brushed with rich gold pigment.

And for this one I added pieces of tissue to create some texture and to dry brush I mixed some of the blueberry pie with the red velvet acrylic paint and a touch of lipstick fizz pigment (for the shimmer) to create a deep purply colour.

The Secret Art box Powertex

Next I layered everything up and put it all together. I used the Powertex as a glue once I was happy with the placement.

           

Some more close ups.

For my next project I wanted to section off parts of the sheet of rice paper included in the box.

Instead of cutting it, I like to get a rough edge as I find it blends in better and isn’t such a harsh line. If you take a wet paintbrush and mark out where you want to tear, if it’s wet enough it should just pull apart. If it rips then the paper isn’t wet enough.

It should just pull apart and creates a lovely edge.

This is what I ended up with. Don’t you think they look much nicer than straight cut edges.

I also cut a piece to size and fitted it inside one of the metal embellishments I got in my box.

Then I completely filled it with transparent Powertex and left it for several days to dry. It is cloudy when a liquid, but dries clear.

I wanted to create a pink colour to combine with the images, so I mixed red and white Powertex until I achieved the colour I wanted.

I found a suitable glass bottle and completely painted it with my new hot pink colour and left it to totally dry before the next step.

Using transparent Powertex I glued on the pieces I’d torn out. I smoothed them out and also added a layer over the top. Now this looks really messy and you might think, oh no, what have I done. But, don’t panic, stick with it, the transparent goes on cloudy, but dries brilliantly clear. I also added some of the fancy yarn I had left from my Bluebird (January) box around the top.

And this is what I ended up with once it was all dry.

The Secret Art box Powertex

I added some chain and a couple of metal charms, the hand and heart from the box. The transparent Powertex has now completely dried that I put in the heart shape, so it has now sealed the image.

And a decorated bottle makes a great candle holder. Should you wish to light the candle the dripping wax won’t be a problem when it meets the Powertex. However, don’t let a naked flame come into contact with any fabric, as Powertex is not a flame retardant. As with all naked flames, do not leave it unattended, we won’t be held responsible for your house burning down!!

The Secret Art Box Powertex

All three makes together.

I hope that you have gained some inspiration for your own, The Secret Art box, Powertex craft subscription box. I can’t wait to see what you do with it. Don’t forget to share your makes on the Powertex Studio Facebook page as we love to see what you’ve been up to.

Did you catch my article last month find it here. Thanks for stopping by Sam

Tropical Powertex Art Doll

Tropical Powertex Art Doll – Mixed Media project by Anne

I have never tried making an Art Doll before and I had so much fun making this Tropical Powertex Art Doll. I wanted to make her really bright and cheerful with a tropical feel – the fabulous zingy cocktail colours from The Secret Art Loft Pigments, Inks, and Acrylics range were perfect.

AW Art Doll 2

Materials Used 

Extras used on the canvas: A4 canvas board, White Paper Decoration, 3D Sand and Balls, Assorted Lace Strips, dried beech nut outer shells and pine cone, small paper clay flowers, old key, gold glitter plus mix blue & green seed beads.

How to create a Tropical Powertex Art Doll

AW Art Doll 1

Firstly I popped out the MDF components from the sheet and coated with Ivory or Bronze Powertex Fabric Hardener and left to dry. The box frame was constructed and hanger section attached (the Powertex acts as a glue too). I also coated one of the ‘waste pieces’ because I thought would make a great bird shape to insert into the box frame.

AW Art Doll 4

Then I cut a background panel for the box frame from the FAB images on the packaging sheet. And glued in place using Easycoat decoupage medium. Using Acrylic Inks in order to add a tint of colour.

I applied Easy Structure paste through a texture stencil onto the large background panel and to sections of the frame. Then used the Art Quotes Stencil to apply text to the frame, and to random sections of text on the wings.

When dry, I used translucent inks to tint the text on the frame. Colouring the outer background panel with Lemon Meringue and Orange Marmalade acrylics. Also brushing over with some Metallic Golden Ink to highlight the texture, before sticking down the box frame.

I coloured the birdy shaped waste MDF piece with acrylic paints. And stuck down into the box in layers using Transparent Powertex. I used Ivory Powertex to coat and stick the metallic embellishment. Bronze Powertex coated the beak and eyes created with seed beads ( I drizzled Bronze Powertex into the bead hole using a cocktail stick, which created dark centres).

The fabric flowers were coated with Transparent Powertex and massaged into the aqua cotton fibres. To embed the seed beads I drizzled some around the sides. Transparent Powertex was mixed with sand to make a 3D glue paste to help hold the flower stems in place.

More acrylic paints were used to colour, and to brush over textured surfaces. Easy Varnish was used to stick down sequins, and to embed glitter which was brushed over sections for extra sparkle. Pearl Pigments in Varnish were also applied with dry brushing to add shimmer. I just love a bit of bling.

Powertex Art Doll

The headdress and face were dry brushed with Pink Flamingo and Limoncello Gold Pigments mixed with Easy Varnish. Sequins and beads were also added for more texture and bling. 1mm wire was used to make a hanging loop.

The wings were coloured with Acrylic Paints and Gold Ink and …  yes I had to add some glitter sparkle too.

Fabric strips and ribbon were treated with Transparent Powertex and used to wrap sections of plastic tubing to create beads for the upper arms and legs. The upper arms were attached with 1mm wire, through the holes in the box frame, in such a way that they were held in place (i.e. not dangling). This enabled the lower arm dangles to hang each side of the body.

AW Art Doll 5

I attached the upper leg sections so that they hung freely at the base giving movement. And dry brushed the lower arm and leg shapes with Varnish and Pearl Pigments, sticking beads down with Transparent Powertex. These were hung from the upper arm and leg beads using wire loops so they dangled freely. Next leaf and flower bead dangles were also added to the frame base and legs using 0.8mm wire (1mm was too thick to fit the bead holes).

The floral MDF shape was painted with acrylics, embellished with a metal filigree shapes and seed beads before gluing to the main background panel.

AW Art Doll 3

My finished Art Doll just makes me so happy. I love her bright happy colours. Plenty of bling and dangles too – cannot help but smile.

Having used the provided shapes to create her I looked at the pile of waste MDF bits left behind – they inspired me to create a canvas. I never waste anything – ha ha.

mixed media powertex canvas

I coloured the background canvas with Bronze Powertex. Texture and the text was then applied using Easy Structure paste through the stencils. I just love this sentiment from the Art Quotes Stencil.

All the waste bits were coated with Ivory Powertex and applied down. But I tried not to think about it too much – as I can spend hours procrastinating on positioning stuff! I just wanted to be free and ‘go for it’ and see what happened.

mixed media powertex canvas

I then started coating some of the embellishments and building up the scene. Sand & Balls were added into wet Powertex and then coloured with inks and by dropping in some pigment powders.

Then I built up a sort of tree on the left hand side using Paper Decoration and lace, adding the Beech nuts and pine cone to embellish.

mixed media powertex canvas

I then added more acrylic colour, and stuck the beads by embedding in wet Transparent Powertex. Pearl Pigments were mixed with varnish for dry brushing over some of the textures. Finally I just couldn’t help myself but had to add some gold glitter mixed into the varnish. More yummy bling.

The finished piece is fairly crazy and abstract but I was pleased with it. I thought that it looked like a foreground beach with water, sand and trees, then rising up in the background were buildings positioned up a hillside. A kind of tropical paradise I thought. You may see something completely different. That is the joy of abstract art. I had to pop in the key to ‘unlock the mystery’. I hope that you like my mad idea for using up all the scrap MDF bits.

Looking for inspiration? Find more projects on the Powertex UK Mixed Media Magazine. Please do share your makes with us in the Powertex Studio and leave and comments or questions in the section below this article.

Bye for now, Anne x.

The Secret Art Box

January The Secret Art Box Bluebird, Powertex uks craft subscription box, powertex box frame

The Secret Art Box – Powertex UK Subscription craft box – by Anna Emelia Howlett

Inspiration for The Secret Art box January Powertex projects

Which lucky crafters got their hands on Januarys The Secret Art box?( The Powertex UK craft subscription box). Me I did!! I squeed a little and did a little dance when I saw the contents. If you don’t want to miss out on further boxes sign up here. I promised myself I would make some quick projects for you this time. So you are able to scratch that creative itch when you haven’t got as much time to spare.


“We wish you bluebirds in the spring, to give your heart a song to sing”

The Secret Art Box

So my mind was racing with all sorts of ideas and I am going to share a few with you. You can get so much out of The Secret Art Box project wise. And here is the first I came up with.

Powertex mixed media box frame

Now I know what you are thinking hey that frame didn’t come in the kit. Whether you are an avid Powertex addict or you are just getting started. I’m sure you will have some sort of frame in your stash. If not use the layout and free hang it or create on a canvas. It really doesn’t matter what you do. There are no set rules with Powertex. But there is on thing you must have, that’s right FUN!!! This is supposed to be a time for letting go and relaxing. Setting some time aside for yourself to do what you love, crafting! And not having to do too much thinking!

To start your frame

I took a plain pine square box frame with the glass removed. I then sprayed it with mahogany and brown bister. The bister is a walnut stain spray that you can get from Powertex UK. So it will dye or stain the area you have used it on. It is a great addition to your stash. So if you haven’t got any definitely pop it on your wish list.

3.jpg

With some Ivory Powertex I mixed in a bit of the blue Powertex in the kit approx a teaspoon of each. Then dry brushed the frame all the way round leaving some of the stained wood peaking through. Next I mixed more blue and Ivory Powertex but a lighter shade and repeated the process. I also sanded back the frame a little because this helps some of the stained wood to show through. Then Taking the blueberry pie from the kit I dry brushed a little around the frame.

2.jpg

I took the blue paperdec (in the kit) and cut around the bird shape. I had some music paper in my stash that I wanted on the other bird. Using the music sheet paper was quiet apt due to the song bird type theme. I coated and stuck down the paper dec onto the mdf bird with the blue Powertex. With some Easy coat matt (another product I would recommend adding to your stash) I stuck the music paper onto the mdf shape.

Mixing bister granules and varnish together to make a brown stain to then apply and age the paper. You could spray it to give the same effect. Currently the bister comes in granules and spray form. So that you can make your own or have it premade in a spray bottle.

4.jpg

How to add the song sheet bird wing

I cut a shape out of music paper and glued on to the back of a cereal packet with Easy coat matt. To raise it off the bird I used the MDF mis-shapes they make great bumper pads. And will add depth instantly to projects.

5.jpg
6.jpg

For the backing board, I used some of the lace and scrim in the kit. To create texture I added some Easy structure. Liberally scrapped across the board with a palette knife and through the super cute stencil that comes with the kit. And then coated with the blue Powertex. Dry brushed with the blueberry pie acrylic and blue curacao pigment and varnish from the kit. (I didn’t prime it, just went straight on with Powertex, but you can if you wish).

Taking the branch I dabbed a little of the easy structure and 3d balls on the leaves. I coated the leaves with Blue Powertex and dry brushed with golden olive pigment from the kit. Sprayed the branch with brown and mahogony bister and varnished once dry. The bird house was sprayed with bister and dry brushed with Ivory Powertex. And the heart sing was created with items in my stash using the Powertex alphabet coated in blue Powertex and dry brushed in olive pigment.

7.jpg

I have to say I am really impressed with the new size bottle and the nozzle. It allows you to easily apply the Powertex. Also making it really easy to use a little at a time. (Powertex cures with the air, so you can’t put it back into the bottle once it’s poured out).

In the past I’ve had to pour out the Powertex onto my palette. But the nozzle controls the flow and I simply applied the Powertex straight onto pieces of my project leaving no waste. I used this handy bottle with nozzle like a glue to stick everything in place. The transparent in this handy sized bottle makes everything even easier to stick down. In case you have any seeping through the sides, as it dries clear.

The Secret Art Box - Box Frame - Powertex birds
Bird Sing Song
The Secret Art Box - Box Frame - Powertex birds

How to create Powertex mixed media bird

With the cute wooden free standing bird I wanted to create a really simple, quick but effective project.  I laid the bird shape on the textured paper, drew around it and cut it out. Then I stuck the paper down using the Blue Powertex.

Top Tip: Leave to dry and take a sanding block around the edges to take off any overhang.

The Secret Art Box - Freestanding bird - Powertex
Free Bird

Then coat the whole project with the Blue Powertex. It will act as a primer, glue and paint all in one. I chose some of the feather embellishments for the tail with a paper rose. The eye is a wooden embellishment with a diamond eye all stuck down with the Powertex nothing else. Just leave to dry. Then paint with blueberry pie acrylic. To finish I mixed a bit of the olive green pigment into the acrylic and dry brushed to finish. 

The Secret Art Box - Freestanding bird - Powertex

LOVE BIRD JOURNAL

The Secret Art Box - Blue journal love birds- Powertex
Love Bird Journal

How to create a Powertex Journal

I wouldn’t be me if I didn’t create a journal. I happen to have some mini books in my stash, waiting to be turned into journals. The left over textured paper was placed on the front and back cover at the bottom of the book. Material from my stash went at the top and the lace in the kit through the middle of the book. Some of the wavy yarn on the spine of the book.

The Plaster heart made a great feature/center piece. All coated and stuck with the Blue Powertex. Dry brushed with the blueberry pie, blue caracao and olive pearl pigment. After all these projects I had over half of my bottle of Powertex, acrylics and pigments. All left over for other projects! Awesome right?

Blue Powertex journal
Blue Powertex journal
Blue Powertex journal
The Secret Art Box - Blue journal love birds- Powertex

With all the little embellishments left over I just couldn’t leave them out. So decided to make some paperclip banners for the journal. I have created a video here as a walkthrough. I hope you have enjoyed seeing these ideas.

Do share your makes if you have been inspired in the Powertex Studio. You can find me at Rosehart Studio or subscribe to my You Tube channel and look out for more videos. Toddles Anna xXx

January craft Subscription Box – Powertex UK –

The Secret Art Box – Powertex UK craft subscription box

“We wish you bluebirds in the spring to give your heart a song to sing”

Please note *** You may not get an exact replica of this box, but similar items will be included ***

I cut a 6 cm polystyrene ball in half as I wanted to fatten the bird up and make him more 3d.

I stuck one on each side of the wooden bird shape.

Next I arranged some sort of platform for everything to sit on. I used part of the cardboard from the box as the base.

I painted the mdf birdhouses with blueberry pie acrylic paint.

I started to compile pieces to make a tag using other items from the box.

So as not to cover up all the background paper, I traced round and cut out the shape.

I placed the mdf bird shape in the cut out background space and put the cut out piece back on top of the bird shape.

I dismantled one of the paper flowers as I wanted to use it to try to represent feathers.

Next step was to cover everything with Powertex. I used the blue from the box and some bronze that I already had to paint the branch top left. The bird is covered in t-shirt fabric and I used a couple of pieces of hessian to create wings. You can easily use the paper decoration for this too.

I just wanted to show you how far the Powertex goes. I covered all of the above pieces liberally and I’ve still got half the bottle left.

And this is how I assembled everything together and coloured it up with the blue curacao and golden olive Secret Art Loft pigments.

I think they look very fitting outside in the garden in the middle of the bush.

I used the golden olive pigment on the body of the bird and on the flower feathers. I painted the leaves on the wallpaper background with blueberry pie acrylic paint.

This actually looks better in real life as the colours are more defined, but unfortunately, my camera doesn’t appear to be a fan of blue!

I hope this has given you a bit of inspiration. Don’t forget to show us what you make with the contents of your box and don’t be shy in uploading them to the Powertex Studio FaceBook page. For further inspiration, visit the free online Powertex magazine here

All Powertex, Secret Art Loft products and subscription boxes can be found here.