Unicorn Blessings (by Anne)

 

Hi all, today I am sharing one of my projects created during the Powertex Garden Party in July. It was an amazing weekend and I went along with my ex’s lovely daughter Marie. Living far apart we rarely get the chance to be together – so it was extra special to have a whole weekend creating together.

Others also came along with friends or family but many came along on their own. Some were familiar with Powertex and some, like Marie, were completely new to the medium. Whether experienced or not, travelling with friends or alone, the Team at Powertex were wonderfully inviting and everyone soon felt relaxed and eager to get started. Tracey gave us all fabulous instructions to help us along the way. It was a wonderfully relaxed weekend and we made many new friends.

One of the projects was to create a Unicorn (or pony if preferred). We were taken through the process and instructed on the appropriate media to create a fully weatherproof piece that could be used as a garden ornament.

 

We were all give a Metal Base with attached MDF Unicorn Template which had already been wrapped with masking tape ready for working.

 

The first step was to paint the whole with a base layer of Bronze Powertex. Then layers of Powertex clay (created with Powertex and Stone Art) were built onto the surface and texturised using wooden print blocks and various tools. The Team had kindly mixed up the clay ready for us to use.

 

We then had a choice of floral silicone moulds to use to make pretty clay embellishments. I chose the lovely Daisy Moulds.

 

Next we treated Powercottonfibres with Powertex to create the mane and tail. Pigment colours were used to add colour. I chose to blend a mix of Ultramarineand Titanium White, plus Burgundyand Titanium White Powercolors, mixed with Easy Varnish and a little water to create a blended colour wash.

 

Next we dry brushed more colour over the surface to pick up and emphasise the texture. I used Colortricx in Silver.

 

When I got home I added a bit more colouring by dry brushing with Rich Gold Colortricx and Interference Violet (Secret Art Loft Pigment).

 

If you know me you will know that I cannot resist a bit of bling. I just had to try adding glitter to the varnish and painted this onto the tail and mane. I used a holographic silvery glitter designed to be added to household paint. In theory it should be weatherproof when embedded in the Easy Varnish (will see how it holds up after she is installed in the garden). Oooooh I love her.
Note: There is a Unicorn Dreams Project Pack available which contains everything needed to create your own magical Unicorn – includes metal base, MDF Unicorn, Powertex, Art Stone, Flower Mould, Pigments, Varnish and instructions.
I also decided to add a little more texture to the base. I added a rough layer of clay and pressed in a crackle textured rubber stamp. I also added 3D Sand and Balls. Finally I treated a few stiff hessian threads with Powertex and pushed them into the clay to create grassy fronds. Various colours were dry brushed over the surface to blend in the base colours with the rest of the project.
Here is Marie’s amazing Unicorn. Truly fantastic.
We all had so much fun and between us created an amazing array of very different takes on this theme. All wonderful.
Sending Unicorn Blessings, Anne x.

 

Mixed media unicorn sculpture – Powertex – Anna Emelia Howlett

If unicorns could fly

So I was super excited when Tracey told me about the new animal shapes available from Powertex Uk. Especially when she said I could create a unicorn! I was so green with envy when I saw the beautiful unicorns created by everyone at the Powertex Garden Party (limited spaces are available to book for next year!Don’t miss out it was an amazing weekend of relaxing, crafty fun!). I created mine with a little difference. Yes she can fly! The unicorn project pack has been put together by Tracey giving you all you need to create this. If you wish to add wings you will need wire in addition.
Now I’d love to say I also did this bit but I was lucky enough to get a pre-made base from Tracey. As you can see from the photo you need to cover both sides of the mdf base with Powertex. Allow to dry, then use masking tape to adhere to the base.
 Then start wrapping foil around the base from the bottom up around the whole shape and use masking tape to keep in place.
 Paint Powertex over the masking tape to seal it and keep everything in place. We used Bronze.
You can choose to place the wings higher up if you wish. I used a really sharp pointed carving tool to make a hole through the tape, foil and mdf. You could use a bradle if you had one. Just make sure you watch your fingers!
I then thredded some wire through the hole and crossed ti over the back of the body and taped in place. The wire was measured at just over 50cm, you could make them smaller or larger if you wish. Wrap the wire with masking tape and paint with Powertex.
 From approx 1kg of Powertex and 250g Stone art tub I made up some clay. Then gradually added piece by piece. And stamped into the clay as I went. It’s important to stamp the clay as you go because as it drys in the air it becomes harder to make an impression in.
I was lucky enough to have to hand an aray of these fabulous wooden block stamps. I love being at hq, I might move into our Traceys studio soon!
 I covered the whole body on both sides and stamped in different patterns.
I then tool my clay and pushed it into the daisy, pansy and rose moulds. It seems I didn’t take a picture of the placement of these, but they ended up on the horses bottom. You can chose to place them anywhere.
I then coated a handful of Powercotton to create the texture on the mane and tail.
And dipped some paper dec in Powertex and covered the wire wings.
 I allowed everything to thoroughly dry and then dry brushed with some White Powertex. Just to allow the colours to come through brighter when I dry brushed them. But allowing the bronze Powertex to create the shadow for depth.
I used Burgundy powercolor into coral powercolor  on the mane.
 Rich gold colourtricx on the horn and the wings and flowers.
 I sprayed the body with brown bister to take the edge off the white. And added a mix of coral and white and layered up the colour on the body through dry brushing.
Turns out unicorns can fly! Hope you enjoyed this project. Of course if you feel as though you could use some guidance with this type of project just contact your local tutor through the directory to book on and have a go! It really makes a difference having an expert to hand. Toodles Anna xXx Follow me on my Instagram or Facebook if you like what I do.
Don’t forget to share your projects on Powertex Addicts United or The Powertex Studio on Facebook. Keep up to date with the latest at Powertex UK.

Rainbow Unicorn Dreams!

People often ask me if I can turn their ideas in to works of art. I’ve never said no even if I have no idea how I’m going to create the final piece. Pushing forward, constantly challenging myself and breaking out of my comfort zones and colours, mostly produces some of my most loved work.
SO….its safe to say that I have pretty much fallen in love with this commission piece and will be sorry to say goodbye.
It is however going to a home where I know it will be loved and cherished as much as I would. And to be fair I can’t carry on keeping all my work I fall in love with I would run out of room in my house and be poor!
I hope you love this little rainbow unicorn wonder as much as I do. All created with my favourite universal medium Powertex. In exactly a month today I will be making my Hochanda debut with our Tracey and boy, oh boy do we have some exciting projects, ideas and NEWshhhhh…. products to show you.
  ❤ Toodle pip Anna xXx ❤